Files
udpscope/docs/claude/invariants-data-path.md
T
Martino FerrariandClaude Opus 4.6 210d124814 docs: the five reseq probe cases as this build measures them, plus the overflow counter's reading
Re-measured all four recorded cases and added a fifth for the re-plan path,
which needs 100 kS/s: at 10 kS/s the ring already covers 838 s, so no window
the control can reach moves time_stride and the window probe re-plans nothing.
Also notes that `stale` is 0 by construction while resequencing is on, and that
the reservation cap is counted in packets, so its sample cost scales with the
batch.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-10-09 06:52:31 +02:00

177 lines
15 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Invariants: the data path — buffers, decimation and the rings
What rebuilds a buffer, why decimation is an average, and the two rules the time ring's precision and its first stamp impose.
Part of [CLAUDE.md](../../CLAUDE.md). These are rules that cost a defect to learn; read the ones touching the area you are editing before you edit it.
- **Any structural change rebuilds the buffer and drops history**: a CONFIG, an
enable/disable, a calibration change, or a **change of display window that moves the
decimation factor**. Calibration is applied at ingest, which is why it re-partitions.
`ScopeModel::set_target_span()` is the window's path in, and it re-plans *only* when
`time_stride` actually changes, so walking the window inside one decade is free; it asks
`plan_partition()` rather than recomputing the factor, because two expressions for that
decision is how the buffer and the view end up disagreeing about the stored rate. It
takes `mutex()` itself — do not call it holding the lock.
- **The shared clock is decimated to fit the requested window; channels never are.** A
window too long to store at the wire rate used to be refused (the control was capped to
`Partition::span_s`), which made a 600 s view of a 1 MS/s stream unreachable.
`plan_partition()` now picks `time_stride`, a power of two, **after** the growth loop has
bought all the ring the budget allows — deciding it earlier over-decimates by whatever
factor growth was about to add. Per-channel `stride[i]` stays 1: a stride of
`round(dt_i / dt_fastest)` keeps one sample per stride, and when that equals the signal's
own period — a 2 kHz sine on a 1 MHz clock, stride 500 — every kept sample sits at the
same phase and the channel plots flat.
- **Decimation at ingest is an average, never a stride.** `Acquisition::on_data()` reads
and accumulates *every* sample and pushes the mean of each group of `time_stride`
(`value_acc_`/`value_acc_n_`, and `time_acc_` for the clock). That boxcar's first null is
at the stored rate, so content that would fold back is attenuated instead of reappearing
as a false low frequency — which is the whole reason decimation was once dropped
entirely. Skipping the read for unstored samples re-introduces the aliasing; the
`UDPSCOPE_PROBE_WINDOW_MS` run under `--freq 2000` is the guard (the anti-alias check in
[probe-readings.md](probe-readings.md)).
The stamp pushed is the group's **mean**, not its last member: that is where the boxcar's
group delay puts the value, and stamping at the end of the group shifts every trace half
a stored sample late. The accumulators are reset whenever `time_stride` or the channel
count changes, so a re-plan starts a fresh group rather than finishing one at the wrong
length. The LOD min/max pyramid still preserves the extremes *of what is stored*; a spike
narrower than a group is now filtered away rather than aliased, which is the correct
trade and is why the status line's `rate` field is worth reading.
- **One bad packet is bridged; only a run of them changes the time source.** The stream-time
checks in `build_stamps()` reject three things: stamps that are not finite, a packet with no
span at all, and a packet whose stamps do not advance past the previous packet's last. A
fourth was added because a real device's clock glitches: a packet whose stamps jump **more
than 256 packet spans** ahead is a fault, not a gap, and must be rejected — letting it
through poisons `last_stamp_`, and the monotonic clamp (`max(stamps[k] - epoch,
last_stamp_)`) then pins every later packet flat at the glitched value, so the whole stream
freezes at one x and never recovers. A rejected packet is **bridged**: its stamps are
replaced by a continuation of the accepted timeline at the declared cadence, so neither the
monotonic mark nor `last_stream_anchor_` is poisoned and the next good packet is accepted
normally. Believing the glitch instead is what condemned the *next*, perfectly good packet
(it now sits below the poisoned anchor, so it fails the advance test) and threw the whole
stream onto the arrival clock. Only **four consecutive** rejected packets abandon the
declared time signal, because that is what a signal which is not a time base at all looks
like; a first packet with nothing to bridge from still falls back immediately. The unit
scale ('ns', 'us', 'ms') is therefore resolved **before** these checks rather than after:
they weigh the stamps against a cadence in seconds, and on a 'ns' stream an unscaled
comparison is off by 1e9, so every packet would read as an implausible jump. The guard is
`tools/mock_udpstreamer.py --time-glitch-at`/`--time-glitch-by` (see
[verification.md](verification.md)).
- **The arrival-clock fallback does not drop history.** `arrival_epoch_` is derived from
`last_stamp_`, so the arrival clock *continues* from the monotonic mark and the two
timelines share a zero by construction — the recorded stamps are therefore still on one
timeline and are kept. The fallback used to call `reset_live_history_locked()` on the
reasoning that the old stamps belonged to a dead clock; they do not, and that wipe is what
made a single glitching packet look like "the live stream restarted from 0 with no action
from the user". The continuity is also what makes a rebase of `TriggerEngine` unnecessary:
the engine holds four absolute stamps (`holdoff_until_s_`, `pending_start_s_`,
`last_trigger_s_`, `last_t_s_`) and they stay valid across the change. Anything that makes
the clock *discontinuous* breaks that and has to reset them.
- **The trigger sees the stored (filtered) signal, not the wire signal.** `engine.process()`
is fed the averaged value, inside the `if` that pushes it. An edge found on a sample that
is not in the buffer would be cut from data that does not contain it.
- **The time ring is `f64` and the value rings are `f32`, and the asymmetry is the point.**
A value's precision is a property of the signal (24 bits is plenty for a sample); a
timestamp's is a property of *how long the scope has been running*, because the stamps are
stored relative to an epoch fixed at the first sample ever seen and so grow without bound
while the interval they must resolve stays one sample period. `f32`'s ULP is 1.9 µs at 16 s
of uptime, 3.8 µs at 32 s, 7.6 µs at 64 s and 61 µs over a 600 s window — so at 1 MS/s two
to four consecutive samples shared a stamp after half a minute, eight after a minute, and
the LOD envelope over such a plateau drew a zero-width segment, i.e. a vertical spike where
the waveform should be. That is "zoom in to ~10 µs and three to five points share a
timestamp, and min/max produces artefacts". **Do not widen the values to match**: they are
the memory budget, and nothing about them is magnitude-bound this way. Three consequences:
`plan_partition()` can no longer count slots in its growth loop (a time slot and a value
sample are different sizes, so it weighs the budget in **bytes** — `sizeof(f64)` for the
clock plus `sizeof(f32) / stride[i]` per channel — and `bytes_for()` is also what bounds
the doubling against overflow); `live_window_locked()` compares its bounds in the ring's own
type with **no rounding step**, the old `f32` round-trip having existed only so that a
sample sitting exactly on a bound was kept whatever the stream's absolute time was; and
`EventSnapshot::stamps` is `f64` because it is cut from this ring and is therefore in the same
units, whatever a given snapshot's own origin is (both kinds are rebased now — an event's
stamps are edge-relative, a pause's freeze-relative — so neither is magnitude-bound the way the
ring is, and the width is for the cut rather than for the coordinate). `RingBuffer<T>` stores
slots as `std::atomic<T>` behind a `static_assert(is_always_lock_free)`, which `double`
satisfies on every supported target. The guard is the **export**: over a multi-million-row
`.npy`, `np.diff(t)` must hold one step to within a few ULP of the column's magnitude (see
the export guard in [probe-readings.md](probe-readings.md) for why it is no longer exactly one
value). Three steps at 2, 2.5 and
3 ULP of *the stream's uptime* — microseconds, not femtoseconds — is this defect.
- **Append is not the only write.** A backfill amends slots that a reservation wrote as NaN, and
the amend is split across threads for a reason:
- **Ring amend — producer thread.** `RingBuffer<T>::amend(absolute, v)` is a single relaxed
store, bounds-checked against `[produced_ - capacity, produced_)`. The same race class as a
push, and an `f32` cannot tear. Measurements and export read the ring directly, so they see
a repair immediately and no second notification is needed.
- **Pyramid amend — consumer (GTK main thread), inside `ChannelBuffer::acquire()`.** The
producer collects amended values in a plain `std::vector<Amend>` member and the consumer
drains it after its own append pass. `acquire()` is called under `model.mutex()`, and the
producer holds that same mutex for all of `on_data`, so the vector is correctly serialised
with no lock-free queue. The reason the pyramid amend cannot also be on the producer: a
bucket is a 32-byte non-atomic aggregate that the renderer reads **unlocked at paint time**,
so a producer writing it could be caught mid-bucket — a `count` that does not match its
`sum`, producing a wrong mean from a structure whose readers trust `count == 0` to mean
*absent*. On the consumer that cannot happen.
- **A hole is stamped at reservation; backfill changes values only.** The f64 time ring is
never amended. `neighbours()' binary search requires a monotonic array, and `window_x0_`
must remain valid; pre-stamping the hole at the declared cadence (exact in relative mode,
the bridge mechanism in stream mode) is what keeps both invariants, and it is why a late
packet's counter, not its arrival stamp, is what addresses the hole. The reservation cap
(`kGlitchPackets`, 256) is counted in **packets, not samples**, so one hole's sample cost
is `256 × batch_` and scales with the stream's batch — 25 600 samples at a batch of 100,
2.56 M at a batch of 10 000 — which is the number to weigh against the ring, not the 256.
- **A re-plan drops every hole and restarts the producer's tick.** `rebuild_locked()` replaces
the store, so `produced()` restarts at 0 and a hole's `slot_begin`/`tick_begin`/`x_begin`
describe a buffer that is gone; it therefore clears `holes_` and bumps
`ScopeModel::plan_generation()`, which the producer compares against the value it last saw
and resets `tick_` on. That is what keeps `tick_ / period == produced()`, the relation
`backfill_from()` derives a slot index from — without it the amend falls outside the ring
and repairs nothing while the hole is still marked repaired, a band saying the opposite of
the truth. The generation is the signal and the stride/channel-count comparison is not: a
reconnect with an identical CONFIG rebuilds the store leaving both unchanged. `slot_base_`
is **not** reset — it is relative mode's clock origin, samples since the stream began, and
relative time must not jump backwards when the user retypes the window.
- **A dropped time slot is clamped, never answered with a sentinel.** `acquire()` pins
the published window to the value ring's base and both rings keep sliding afterwards —
their capacities are equal, so there is no slack — which means the oldest few samples
of a saturated window routinely point at time slots the producer has already
overwritten. `ChannelBuffer::time_of()` therefore clamps to the oldest *readable*
slot: a stamp of `0` would reach `x_bounds()`, and from there `dx()` and `x0()`, which
is the renderer's whole index mapping — one unreadable slot inflated `dx()` by the
ratio of elapsed stream time to the retained window and clipped the older part of
every live view. The library's `StreamSeries` is immune for a reason worth copying:
its x is `x0 + i*dx`, a function of the absolute index, so an overwritten slot costs a
*y* value, never the geometry. Clamping buys the same bargain here.
- **The window's *first* stamp is cached by `acquire()` and never read at paint time.** The
clamp above makes an unreadable slot *survivable*; it does not make reading it *safe*, and
`absolute(0)` is not an ordinary slot — `acquire()` pins the window to `values_->base()`, so
sample 0 is the ring's oldest, the very slot the producer is about to overwrite. `time_of()`
checks the bounds and then copies, and when the producer laps the slot in between the stamp it
returns is **one whole ring-span too new**. Everything else on a `ChannelBuffer` is read at
paint time with no lock, and `x0()` *was* the origin the renderer reconstructed every trace
point from (`gather[i] + series.x0()`), read both inside its increasing-suffix filter and again
at `stage_xy()` — so one torn read of that one slot produced three pictures, all of them "the
waveform is gone while the grid and the axes stay": `neighbours()` tests against `x_at(0)` and
refused the whole visible range (the renderer then gathered the *entire* ring at a coarse level
and drew it off the axis — `idx=[0..8388608) level=7 cover=320%`); `x0()` changing *during* the
filter loop dropped three quarters of the points; and `stage_xy()` shifted the finished polyline
a ring-span off its axis. The gather origin is the *view's* minimum now (see the `gather()`
invariant), a local of the renderer's, so the second and third of those are structurally
impossible — but **the first is not**, `x_at(0)` is still what `neighbours()` tests the visible
range against, and that is the one that gathered the whole ring. The cache is load-bearing for
that reason; do not read the slot at paint time because two of its three symptoms are gone.
That is the "with measurements and cursors active the plot flickers as
if there were no data, at no constant frequency" defect. It is **live only** (a snapshot is
immutable, so `x0()` is constant for `Held`/`Paused`), it is a race against packet arrival so it
is irregular, and the measurements pane makes it both likelier and larger: the pane holds
`mutex()` for each `MeasureWindowReader`'s life, so the released producer bursts several packets
at once. `acquire()` runs on the consumer under `ScopeModel::mutex()` — the same lock the
producer's pushes hold — and the window is pinned on the line above, so that is the one point in
the object's life where the slot is safe to read; `window_x0_` is also the *right* answer rather
than merely a stable one (it is the stamp sample `window_base` actually carries, where a
paint-time clamp answered with whatever slot happened to be oldest *now*). `x_at(0)` is served
from it too, for the same reason, and `invalidate()` clears it with the window. The guard is
`trace ink:` / `[ink]` (see [probe-readings.md](probe-readings.md)). The same torn read still exists for a small `i > 0`
— the oldest frame or so of samples — but there its observable is a *prefix plateau*, which is
exactly what the renderer's increasing-suffix filter was written to absorb, so it is a different
symptom and deliberately not fixed here.