The figure-mode cursor test covered the *vertical* marker, which is one time
shared by every row. A horizontal ruler is the other half: its y is on that
row's own axis, so two rows' rulers are two different values, and every row's
has to be drawn in its own band. A host that puts two rulers on every plot
(`udpscope`'s cursors pane) needs exactly this, and had no test for it.
It asserts the strokes only -- the ruler's value label goes through the text
path, which this case is not about, so it uses the harness's no-atlas backend.
A host whose annotation is a readout -- the point where a cursor crosses a
trace -- has to move it every frame, and `add_annotation()` only appends:
the id would change every frame and the annotation count grow without bound.
The setter keeps the id, ignores a stale one exactly as the cursor setters
do, and pairs with parking (`visible = false`) since there is no
`remove_annotation`.
Tested by `an_annotation_can_be_moved_by_id` in tests/test_plot.cpp.
A range straddling zero never lands *on* zero: the walk starts at
`ceil(min / stride) * stride`, which is not representable whenever the stride is
not a power of two -- 0.1 and 0.2 are the everyday ones -- so the tick that means
zero arrives a few ULP off and `format_si` labels it from six prefixes down.
`[-1, 1]` read `-1 -500m -139a 500m 1`. Deriving the tick by multiplication
rather than accumulation does not help, because the error is already in the
first term.
Every tick is an integer multiple of the stride, so the smallest magnitude a
non-zero tick can have is the stride itself, while the residue is a few ULP of
the range -- ten orders of magnitude apart. Anything inside a millionth of the
stride is therefore the origin and nothing else. It is stored as exactly `0.0`
rather than merely labelled so: `Axis::refresh()` re-formats a time axis from
`tick.value`, where the same residue reads `3.19e-13ms`. The walk variable is
left alone, since `minor_index_is_major` counts indices from `first_major` and
both operands have to stay on the walk's own grid.
The two narrow-y-title cases were calibrated on the defect -- the bogus `-55.5a`
was a six-character label, and its width is what spent the chrome allowance and
made the titled and untitled frames comparable. They are re-seated on a
milli-scale range, whose `-200m` is wide for a real reason, and the zero-width
strip the frame comparison depends on is now asserted rather than assumed.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Text was point-sampled (`GL_NEAREST` plus `floor(v_uv * u_tex_size)`), which
at a non-integer scale *deletes* texels instead of blending them. The library's
own default -- a 12 px style over the 13 px embedded bake -- dropped one of
every 8 columns and one of every 17 rows of every glyph, so whole strokes went
missing and which ones depended on where the unsnapped pen fell. `kTextFS` now
does a 2x2 bilinear fetch clamped to the instance's own cell: the clamp keeps
the no-bleed guarantee the sampler mode protects (the atlas is a tight strip of
cells with no padding), and at scale 1 with a whole pen the weights are exactly
0, so it stays as crisp as the point sample.
Grid and axis lines were staged in data space and mapped in the vertex shader,
so a 1 px line's centre landed on an arbitrary fraction -- x = 100.0 lights two
columns at half coverage, x = 100.5 lights one crisply, and a frame mixed both.
`u_snap` rounds an axis-aligned segment's ink *leading edge* onto a pixel
boundary, which reduces to integer+0.5 for odd widths and to an integer for
even ones with no case analysis. It is on for the chrome that frames a plot and
off for anything drawn at a data position, since the rounding moves a line by
up to half a pixel. Diagonals are untouched.
`text_pixel`'s threshold drops to 160 because filtered glyphs legitimately peak
at 0.844 coverage at 12/13; the 180 threshold found text only while the sampler
was also deleting a column and a row of it.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Breaking: Series::gather emits x relative to x0() and takes a GatherMode;
consumers reconstruct absolute x in f64 before mapping (series.hpp documents
the contract).
Bugs, each pinned by a fail-before regression test:
- render: f32 staging quantised epoch-time x into 128 px columns; every
data-space draw now stages to_space(x) - to_space(origin) with the origin
folded into the offset uniform in f64 (epoch/zero-origin twins rasterise
identically)
- ticks: major test was ULP-fragile and blanked epoch axes; majors are an
integer-index test and are never truncated by the minor cap
- gather: LOD envelope emitted buckets straddling [begin,end); ceil/floor
bucket edges + raw lead/trail spans
- live follow: log x axes held a linear span and zoomed every frame; span and
offset now live in axis space (plot + both figure link-group paths)
- input: a zero-notch wheel disarmed auto_scale on every axis; dy==0 pans x,
factor == 1 / inf refused in wheel and drag zoom
- render: the single text flush painted legend names over the crosshair
readout panel; two batches, under flushed before the panel
- data: NaN dropped from min/max unless it seeded the fold; non-finite
samples are now excluded from every aggregate and from cached bounds
Robustness: viewport normalisation (no clamp UB), non-finite range refusal,
pyramid level cap at 57 (no shift/div UB through public gather), rounded ring
capacity documented + pre-sized, GL blend func and UNPACK_ALIGNMENT
save/restore, Renderer::release_gl() teardown, u64 buffer epochs, annotation
captions clamped, button-aware GLFW row capture, cached figure row rects (no
per-event layout), ruler-pair measurement refused, span-nonfinite guards in
axis_ends.
Features: XY series (sorted x, binary-search neighbours/snap, LOD over sample
index); StreamSeries::freeze(); ArraySeries::push(); per-trace dash and
markers (scatter at width 0) with auto or literal stride; GatherMode
Envelope/Nearest/Mean via bucket_sum/sumsq; Style::line_aa_px; per-glyph text
colour (readout values in trace colour); wheel-dx x pan; arrow-key pan;
Escape cancels a drag and restores captured ranges; modifier-masked box zoom
(Shift both, Ctrl x, Alt y); double-click reset via PointerEvent::time_s;
ImGui key repeat unified; pinch gestures on Qt and GTK; pixelDelta wheel path
and DevicePixelRatioChange handling; GNUInstallDirs, SOVERSION,
SameMinorVersion, generated plot/version.hpp, relocatable plot.pc, licence
install, FILES_MATCHING, GitHub Actions CI (debug/coverage/asan).
Suite 283 -> 350 cases, 0 failed; coverage 93.9% (3730/3971) over 24 files,
floor 80/90 held; ASAN preset suite green; all four demos run headless (the
GTK scripted-resize check needs a window manager and fails identically on the
parent commit); readme_main.cpp committed and compiles with the README
command; pkg-config and find_package consumption verified from a relocated
install prefix.
`remove_region()` now clears or decrements the published `hot_.region` with the
cache it re-indexes, so a frame after a removal highlights the region the handle
actually names. The new case covers both branches (a handle above the hole
follows it down, the removed region's handle is cleared with its zone), and the
coverage document is regenerated by the command that measured it: 95.2% of src/,
every file at or above 80%.
Three smaller findings at the plot/figure seam:
* `Plot::remove_region()` re-indexed `region_stats_` but left `hot_.region`
naming the old index, so a frame after a removal highlighted the wrong
region's bound and an open drag edited a different region. The published
handle (and its zone) is now cleared or decremented with the cache, and the
contract documents that a host must not remove a region mid-drag.
* `Figure`'s `kMinRowHeightPx` was applied as a *device*-pixel floor while
chrome is logical, so at 2x the guarantee was half as strong exactly where
the chrome is twice as large. It is now a logical constant converted through
the row's own `ui_scale()`, 1:1 for a non-positive scale as `Style::device()`
does.
* `Figure::link_x()` refused a member whose axis 0 was `XFollow::Live`, but
nothing refused `set_x_follow(0u, XFollow::Live)` *after* linking. The group
then wrote its range into an axis that reinterpreted it against its own live
edge, read it back as an external change, and tracked one member instead of
the union. `Plot` now carries a linkage flag (`set_x_link_member()`), set by
`link_x()` and cleared by `unlink_row()`, and `set_x_follow()` refuses `Live`
on a linked axis.
Tests: arming `Live` on a linked member leaves it `Off` and unlinking restores
the ability to arm it; the row-height floor is 24 and 48 device pixels at 1x
and 2x respectively.
Three findings reachable by ordinary use:
* `Controller::axis_zoom()` divided by `Plot::ui_scale()` directly, though
`Style::device()` documents a non-positive scale as host state that must be
tolerated. With `ui_scale == 0` and a negative drag delta, `logical_dy` was
`-inf`, the factor `+inf`, and the guard `!(factor > 0.0)` did not reject it:
`zoom_x_axis`/`zoom_y_axis` computed `anchor + (bound - anchor) * inf`, and
`set_y_range()` stored it verbatim and cleared `auto_scale` -- an axis left
non-finite until an auto-fit. A negative scale silently inverted the zoom.
A scale that is not positive and finite now means no zoom at all.
* `draw_annotations()` stages its caption into the frame's single text batch,
which `flush_text()` draws *after* `clear_clip()`, so a caption staged while
the axes clip was engaged was rasterised with the viewport clip. An
annotation anchored outside the visible range kept a caption with no cross,
and in a `Figure` -- whose rows tile the figure -- that caption painted into
the neighbouring row. A caption whose anchor is outside `axes` is now skipped
with its cross, rather than splitting the frame's one text draw call (which
would cost a draw call per row and mis-clip the labels staged outside `axes`).
* `dump_frame_ppm()` was the one public entry point not `noexcept`, so a
`std::bad_alloc` crossed the API boundary. Its buffers are now sized before
anything is on disk and a failure is reported as `ErrorCode::OutOfMemory`,
exactly as `TrueTypeFont::from_file()` reports it.
Tests: `ui_scale` 0 and -1 leave the axis range finite and unchanged with
`auto_scale` intact; an annotation anchored outside a bottom figure row's y
range leaves no caption ink in the row above, while an in-range one still
draws; a `static_assert` pins the dump's `noexcept`.
`controller_at()` routed every pointer event by the row the pixel was in,
ignoring the row a drag started in, so a press on one figure row followed by a
motion and release in another delivered the motion and release to a controller
whose `mode_ == None`. The owning controller kept `mode_`, `drag_region_`,
`drag_cursor_` and `drag_fixed_x_` set for ever: `publish_hot()` kept publishing
the grabbed handle, `grabbed_region()` reported a drag that had ended, and a
later gesture re-entering the row resumed the stale edit from the old anchor.
`feed_pointer_event()` now owns the routing: a press captures the row it landed
in and every motion and the release until the button comes up go to that row
(`pointer_target()`), cleared on release and when another figure is set. The
GLFW callbacks build the event and call it, so a windowless host or a test can
drive the routing too.
Two neighbours in the same seam:
* `sync_figure_crosshair()` called the four-argument overload unconditionally,
so a documented vertical-only crosshair (`horizontal == false`) was promoted
to a full cross at the stored y == 0, clamped to the axes edge and made
permanent; the change detection also keyed on x alone, missing a y-only move
to another row at the same x (two rows showing one horizontal line, spec 17).
It now consults `crosshair().horizontal` and compares the hovered row's y.
* Only the row under the pointer republished its hot handles, so a row the
pointer left kept drawing a hovered marker or bound as if it were still
under the pointer, and answered `hovered_region()`/`grabbed_cursor()` for
it. The run loop clears every other row's handles, keeping the captured
row while a drag owns the button, and reads the frame's one layout once
instead of recomputing every row five times.
Test: a press on row A's region, a motion into row B, a release in row B
asserts no controller keeps a drag mode, nothing reports a grabbed handle, and
a later press-and-motion that re-enters row A does not resume the old edit.
The repository had no licence at all, so every source was all-rights-reserved
by default. Add the verbatim MIT text at LICENSE (Copyright (c) 2026 Martino
Ferrari) and a two-line SPDX header to each of the 113 first-party sources --
48 include/plot, 26 src, 10 adapters, 5 examples, 21 tests, 3 tools -- so the
grant travels with each file rather than relying on the root document alone.
Scripts keep their shebang on line 1; the SPDX lines follow it. Genuinely
vendored code is untouched: third_party/stb_truetype.h carries no header of
ours. src/render/embedded_mono_font.cpp is generated, so tools/fonts/gen_atlas.py
emit() now writes the two lines into its header comment and the file was
regenerated -- gen_atlas.py --check passes and the regeneration adds only those
comment lines to the previously committed file.
README's provenance section now states MIT and links LICENSE.
No code, test or public API change.
The figure sync learns which row the pointer is in and that row's local y, so the
shared x goes to every row and the horizontal line only to the hovered one -- a
crosshair that finally marks a row where its y means something. The stroke gains
Style::crosshair_width/_dash_on/_dash_off (logical; 0.75 / 4 / 4), a per-Crosshair
override, and a fragment-shader dash on v_along (off == 0 is solid), anchored to the
axes edge each line is staged from so the phase does not crawl.
Review fix pass 1 on the task 7 work; four findings, all closed.
1. The Qt demo's region sat across the middle of the window, which is exactly
where its own scripted input check pans: after the check's box zoom the press
opened DragMode::MoveRegion, the x range never moved, and the check printed
'input check pan FAIL' -- under an exit 0, because the verdict was printed and
not returned. The region now rides the left sixth (as the GLFW demo's does),
both checks pass, and the verdict is wired to the exit status. The same audit
found two more printed-only verdicts -- the GTK demo's scripted-resize layout
check and its screenshot write (and Qt's) -- now wired too. What stays
printed-only is the screenshot line of the GLFW host and the ImGui widget,
where the dump happens inside the adapter's frame loop.
2. A follow-ing link group was invisible to the input layer: a member's own axis
must be XFollow::Off (link_x() refuses a Live member), so Controller's
x_zoom_anchor() extrapolated a coordinate from the pointer instead of using
the live edge and a wheel over a row's axis strip walked the window back by
19% of its width (behind 0.000000 -> 0.285809 s). The group now publishes its
own edge to every member (Axis::live_owner + Plot::set_x_live_owner, written
by Figure::push_link, cleared when the group stops following or the row
unlinks), and x_zoom_anchor() reads it. Public-header addition, called out.
Measured after: behind 0.012992 s and the window's right edge bit-identical to
the edge the group published at the gesture.
3. The multiplot summary printed x_link_count() -- a number of groups -- under
'rows in it'. It now reports the members and the group count separately, and
every row line carries its own group id.
4. Host::controller_at() promised to clamp a pixel in a row gap to the nearest
row and only clamped below the last one, so a gap pixel went to row 0. It now
selects by distance, and tests/test_glfw_host.cpp pins it with a 40 px gap --
the first coverage of the host's figure routing, which needs no window.
New cases: tests/test_controller.cpp x2 (the anchor and the hint's lifecycle),
tests/test_glfw_host.cpp x3 (routing, the gap, the single-plot fallback): 229
cases, 0 failed, ASan clean. All five demos exit 0, the three self-checking
modes exit 0, and the amended assertions were confirmed failing against the
pre-fix behaviour.
Review of the atlas refactor found one Important and three Minor issues:
- Important: TextAtlas::sync called glGetIntegerv before any available() check,
so a host that synced before plot::gl::load() -- which is legal for a public
class Tasks 2 and 8 build backends on -- segfaulted on a null entry point
instead of receiving the Status the interface promises. It now follows the
handle-constructor convention (available(), then the entry point itself) and
reports Unsupported.
- empty() no longer means "a GL name exists": releasing one is a
glDeleteTextures call, so the no-atlas path forgets the atlas and only resets
the texture when there is a table to release it with.
- end_frame's comment still claimed the frame hands back the unpack alignment
init() set, contradicting the code below it and renderer.hpp.
- The orientation case's texel probe mapped the atlas' u along the cell's +v
axis and vice versa, which is a no-op for its two diagonal probes -- so it
could not fail on a transposed UV mapping, and its own comment misstated the
rule. Probes now follow the shader's rule and include an off-diagonal pair.
- The null-glyph path of add_text (and its twin in walk_text_clipped) was
unreached by any case.
Cases: text_atlas_reports_a_status_when_the_entry_points_are_missing,
add_text_skips_a_codepoint_the_backend_cannot_draw.
The text pipeline stages a glyph's rect *origin* per instance and carries the
rect's *size* once per draw, so a backend whose glyphs have differing rect sizes
-- a TrueType packing trimmed to ink, which is Task 8's shape -- would have drawn
every glyph at whichever size it happened to be told, with nothing downstream
able to tell. Make that constraint structural rather than documented:
- TextBackend::cell_uv() declares the one cell size, and the contract (an atlas
is a fixed-cell grid; a proportional face draws its glyphs *into* a uniform
cell instead of trimming each rect to its ink, and why the pipeline needs it)
is stated on the atlas accessors.
- glyph_is_cell() is the check; add_text()/set_cell() declare the cell from the
backend, and the staging path asserts it for every glyph in a debug build.
A release build draws on with the cell it was told, as before.
- Renderer::flush_text() takes u_glyph_uv from the backend, not from the batch,
so the draw's one rect size can never come from whichever glyph was staged
first.
Final whole-branch review fixes.
1 (Important). Plot::measurement() cached on (series pointer, sample count)
only, so a saturated StreamSeries -- whose size() stays pinned while x0()
advances every acquire() -- froze its readout on the first saturated frame
until a cursor moved. The cache key now carries the series' x0() (new
MeasureSlot::last_x0), so a sliding window recomputes and a static series
still does not: asserted with a new macro-gated counter hook
(plot/detail/measure_count.hpp, PLOT_COUNT_MEASURE_RECOMPUTES, wired like the
pyramid and ring counters, absent from the release library). New case
saturated_stream_measurement_tracks_the_sliding_window: saturated ring,
stationary cursors, ramp in absolute x -- zero recomputes for repeated reads
with nothing moving, one per acquire while it slides.
2-3, 9. Spec: 4.3 described a GL_LINE_STRIP path that does not exist (there is
one rasteriser -- instanced anti-aliased quads -- and dense_threshold_spp
selects the gather level, not a primitive); 8 named a PLOT_GL_CHECK() macro
that exists nowhere, and stated no exception policy. The table, the field's
comment and 8 now describe the real gather-level threshold, the real
glGetError() drain plus the stores' drop-to-orphan fallbacks, and the real
policy: library failures return Status/bool, allocating entry points propagate
std::bad_alloc.
4. The frame handed back neither GL_UNPACK_ALIGNMENT (init() sets 1 for the
atlas) nor the clear colour (queried once with a new glGetFloatv entry).
end_frame() restores both and renderer.hpp lists them in the residue
contract.
5. draw() kept a host TextBackend for layout while drawing with its own font.
The renderer now installs its font unconditionally -- strips and labels measure
and draw with one backend -- with a debug-build diagnostic if a different one
was set, and Plot::set_text_backend() is documented as the no-renderer path.
New case renderer_measures_the_labels_it_draws asserts layout, measuring and
the drawn label's ink agree.
6-10. draw()'s style overwrite stated at the call site; the load-sensitive
wall-clock bound in test_measure.cpp replaced by a counter assertion (same
interval, same fold count over a 512x length ratio); dump_frame_ppm drops
noexcept and says why it may allocate; error.txt ignored (not this project's,
not generated here) rather than deleted.
Verified: debug and release build clean (-Wall -Wextra -Wpedantic -Wconversion
-Wshadow), 4/4 ctest entries pass, 130 cases pass (was 127), umbrella and
header self-containment checks pass, and no counter symbol in the release
archive.
The linux-release preset inherited PLOT_BUILD_TESTS=ON, so the release build
compiled the pyramid cover/merge and ring upload/wait/slot counters into
libplot_core.a and cmake --install shipped them. Set PLOT_BUILD_TESTS=OFF in the
preset; the suite keeps running in linux-debug and linux-asan, which are
unchanged.
Also pin the two header properties the plan calls Global Constraints and that
nothing guarded: every header under include/plot/ compiles standalone, and
include/plot/plot.hpp includes every public one. tests/CMakeLists.txt globs the
headers at configure time (CONFIGURE_DEPENDS) and generates one TU per header
plus an umbrella TU that constructs Plot, Renderer, data::StreamSeries and
input::Controller; a ctest entry builds the header TUs and runs the umbrella,
and cmake/plot_umbrella_check.cmake fails configure and ctest when a public
header is missing from the umbrella.
Martino Ferrari