Martino Ferrari
251 lines
7.9 KiB
Plaintext
251 lines
7.9 KiB
Plaintext
# ═══════════════════════════════════════════════════════════════════════════
|
||
# uopi test IOC database — covers all widget types and EPICS features
|
||
#
|
||
# Requirements: EPICS Base 3.15+ (uses RNDM calc function for noise)
|
||
# Prefix: UOPI:
|
||
#
|
||
# Run with: softIoc -s -d uopi_test.db
|
||
# ═══════════════════════════════════════════════════════════════════════════
|
||
|
||
# ── Phase counter ────────────────────────────────────────────────────────────
|
||
# Increments 10x/s; used as phase source for trig-based simulations.
|
||
# At 0.1s scan, 1 step = 0.1 rad → period 2π/step·rate = 62.8 s.
|
||
|
||
record(calc, "UOPI:TICK") {
|
||
field(DESC, "Phase counter (0.1 s)")
|
||
field(SCAN, ".1 second")
|
||
field(CALC, "A+0.1")
|
||
field(INPA, "UOPI:TICK NPP NMS")
|
||
field(VAL, "0")
|
||
field(PREC, "2")
|
||
}
|
||
|
||
# ── Analog read-only signals ─────────────────────────────────────────────────
|
||
|
||
# Temperature: sine 10–90 °C, 62.8 s period, full alarm chain
|
||
# Tests: textview, gauge (color zones), barh, plot timeseries, quality dot
|
||
record(calc, "UOPI:TEMP") {
|
||
field(DESC, "Simulated temperature")
|
||
field(SCAN, ".1 second")
|
||
field(CALC, "50+40*SIN(A)")
|
||
field(INPA, "UOPI:TICK NPP NMS")
|
||
field(EGU, "degC")
|
||
field(PREC, "2")
|
||
field(LOPR, "0")
|
||
field(HOPR, "100")
|
||
field(LOW, "20")
|
||
field(HIGH, "78")
|
||
field(LOLO, "12")
|
||
field(HIHI, "88")
|
||
field(LSV, "MINOR")
|
||
field(HSV, "MINOR")
|
||
field(LLSV, "MAJOR")
|
||
field(HHSV, "MAJOR")
|
||
}
|
||
|
||
record(calc, "UOPI:TEMP_A") {
|
||
field(DESC, "Simulated temperature")
|
||
field(SCAN, ".1 second")
|
||
field(CALC, "10+20*SIN(A+10)")
|
||
field(INPA, "UOPI:TICK NPP NMS")
|
||
field(EGU, "degC")
|
||
field(PREC, "2")
|
||
field(LOPR, "0")
|
||
field(HOPR, "100")
|
||
field(LOW, "20")
|
||
field(HIGH, "78")
|
||
field(LOLO, "12")
|
||
field(HIHI, "88")
|
||
field(LSV, "MINOR")
|
||
field(HSV, "MINOR")
|
||
field(LLSV, "MAJOR")
|
||
field(HHSV, "MAJOR")
|
||
}
|
||
|
||
# Pressure: sawtooth 0–10 bar, ~20 s period
|
||
# Tests: gauge, barh, different EGU
|
||
record(calc, "UOPI:PRESSURE") {
|
||
field(DESC, "Simulated pressure")
|
||
field(SCAN, ".5 second")
|
||
field(CALC, "10*((A%6.2832)/6.2832)")
|
||
field(INPA, "UOPI:TICK NPP NMS")
|
||
field(EGU, "bar")
|
||
field(PREC, "3")
|
||
field(LOPR, "0")
|
||
field(HOPR, "10")
|
||
field(HIGH, "8")
|
||
field(HIHI, "9.5")
|
||
field(HSV, "MINOR")
|
||
field(HHSV, "MAJOR")
|
||
}
|
||
|
||
# Flow rate: noisy sine 20–80 L/min, faster period (10.5 s), 5 Hz update
|
||
# Tests: barv, different scan rate, noise in plot, textview with unit
|
||
record(calc, "UOPI:FLOW") {
|
||
field(DESC, "Simulated flow rate")
|
||
field(SCAN, ".2 second")
|
||
field(CALC, "50+30*SIN(A*6)+5*RNDM")
|
||
field(INPA, "UOPI:TICK NPP NMS")
|
||
field(EGU, "L/min")
|
||
field(PREC, "1")
|
||
field(LOPR, "0")
|
||
field(HOPR, "100")
|
||
field(LOW, "10")
|
||
field(LOLO, "5")
|
||
field(LSV, "MINOR")
|
||
field(LLSV, "MAJOR")
|
||
}
|
||
|
||
# Noise signal: pure random 0–1, 10 Hz
|
||
# Tests: plot histogram, plot FFT, fast timeseries, synthetic lowpass
|
||
record(calc, "UOPI:NOISE") {
|
||
field(DESC, "Random noise signal")
|
||
field(SCAN, ".1 second")
|
||
field(CALC, "RNDM")
|
||
field(PREC, "4")
|
||
field(LOPR, "0")
|
||
field(HOPR, "1")
|
||
}
|
||
|
||
# Auto-incrementing integer counter, 1 Hz
|
||
# Tests: textview integer, plot (monotonic), different numeric type
|
||
record(calc, "UOPI:COUNTER") {
|
||
field(DESC, "Event counter (1 Hz)")
|
||
field(SCAN, "1 second")
|
||
field(CALC, "A+1")
|
||
field(INPA, "UOPI:COUNTER NPP NMS")
|
||
field(VAL, "0")
|
||
field(LOPR, "0")
|
||
field(HOPR, "100000")
|
||
}
|
||
|
||
# Temperature deviation from setpoint
|
||
# Tests: barh with negative range, alarm on deviation, computed read-only
|
||
record(calc, "UOPI:TEMP_DEVIATION") {
|
||
field(DESC, "Temp deviation from setpoint")
|
||
field(SCAN, "1 second")
|
||
field(CALC, "A-B")
|
||
field(INPA, "UOPI:TEMP NPP NMS")
|
||
field(INPB, "UOPI:SETPOINT NPP NMS")
|
||
field(EGU, "degC")
|
||
field(PREC, "2")
|
||
field(LOPR, "-60")
|
||
field(HOPR, "60")
|
||
field(HIGH, "10")
|
||
field(HIHI, "25")
|
||
field(LOW, "-10")
|
||
field(LOLO, "-25")
|
||
field(HSV, "MINOR")
|
||
field(HHSV, "MAJOR")
|
||
field(LSV, "MINOR")
|
||
field(LLSV, "MAJOR")
|
||
}
|
||
|
||
# ── Binary / status signals ───────────────────────────────────────────────────
|
||
|
||
# Interlock: fires when temperature exceeds 80 °C — MAJOR alarm
|
||
# Tests: LED with condition, quality=bad on alarm, computed binary
|
||
record(calc, "UOPI:INTERLOCK") {
|
||
field(DESC, "High-temp interlock")
|
||
field(SCAN, "1 second")
|
||
field(CALC, "A>80?1:0")
|
||
field(INPA, "UOPI:TEMP NPP NMS")
|
||
field(HIHI, "1")
|
||
field(HHSV, "MAJOR")
|
||
field(LOPR, "0")
|
||
field(HOPR, "1")
|
||
}
|
||
|
||
# 8-bit status word: rotating single-bit pattern every 2 s
|
||
# Tests: Multi-LED widget (bitset display), integer signal
|
||
record(calc, "UOPI:STATUS_BITS") {
|
||
field(DESC, "8-bit status word")
|
||
field(SCAN, "2 second")
|
||
field(CALC, "A>=128?(A*2-255):(A*2)")
|
||
field(INPA, "UOPI:STATUS_BITS NPP NMS")
|
||
field(VAL, "1")
|
||
field(LOPR, "0")
|
||
field(HOPR, "255")
|
||
}
|
||
|
||
# ── Read-write signals ────────────────────────────────────────────────────────
|
||
|
||
# Analog output setpoint — writable, drives UOPI:TEMP_DEVIATION
|
||
# Tests: setvalue widget (numeric write), unit from metadata
|
||
record(ao, "UOPI:SETPOINT") {
|
||
field(DESC, "Temperature setpoint")
|
||
field(EGU, "degC")
|
||
field(PREC, "1")
|
||
field(LOPR, "0")
|
||
field(HOPR, "100")
|
||
field(DRVL, "0")
|
||
field(DRVH, "100")
|
||
field(VAL, "50")
|
||
field(PINI, "YES")
|
||
}
|
||
|
||
# Beam enable: binary On/Off toggle
|
||
# Tests: LED display, button (persistent mode — tracks signal state)
|
||
record(bo, "UOPI:BEAM_ON") {
|
||
field(DESC, "Beam enable")
|
||
field(ZNAM, "Off")
|
||
field(ONAM, "On")
|
||
field(VAL, "0")
|
||
field(PINI, "YES")
|
||
}
|
||
|
||
# Reset command: writes 1 and auto-reverts to 0 after 1 s (IOC-side pulse)
|
||
# Tests: button one-shot mode — IOC handles the reset automatically
|
||
record(bo, "UOPI:RESET_CMD") {
|
||
field(DESC, "Reset command (auto-clears after 1 s)")
|
||
field(ZNAM, "Idle")
|
||
field(ONAM, "Reset!")
|
||
field(HIGH, "1.0")
|
||
}
|
||
|
||
# Latch: plain writable binary — no auto-reset
|
||
# Tests: button set-reset mode — uopi writes 1 then resets after delay
|
||
record(bo, "UOPI:LATCH") {
|
||
field(DESC, "Latch enable")
|
||
field(ZNAM, "Released")
|
||
field(ONAM, "Latched")
|
||
field(VAL, "0")
|
||
field(PINI, "YES")
|
||
}
|
||
|
||
# Operating mode: 4-state enum (writable)
|
||
# Tests: setvalue (numeric write to enum), textview (shows numeric state)
|
||
# multi-LED style readback via setvalue, alarm state on Fault
|
||
record(mbbo, "UOPI:MODE") {
|
||
field(DESC, "System operating mode")
|
||
field(ZRST, "Idle")
|
||
field(ONST, "Running")
|
||
field(TWST, "Fault")
|
||
field(THST, "Maintenance")
|
||
field(ZRVL, "0")
|
||
field(ONVL, "1")
|
||
field(TWVL, "2")
|
||
field(THVL, "3")
|
||
field(TWSV, "MAJOR")
|
||
field(THSV, "MINOR")
|
||
field(VAL, "0")
|
||
field(PINI, "YES")
|
||
}
|
||
|
||
# String message: writable freeform text
|
||
# Tests: setvalue with string type, textview string display
|
||
record(stringout, "UOPI:MESSAGE") {
|
||
field(DESC, "Operator message (writable)")
|
||
field(VAL, "System nominal")
|
||
field(PINI, "YES")
|
||
}
|
||
|
||
# Waveform: 128-point float array
|
||
# Tests: plot FFT, plot histogram over array (populated at IOC start)
|
||
record(waveform, "UOPI:WAVEFORM") {
|
||
field(DESC, "64-point sample waveform")
|
||
field(FTVL, "FLOAT")
|
||
field(NELM, "64")
|
||
field(EGU, "counts")
|
||
}
|