udpscope/help/C/org.udpscope.app/overview.page

<page xmlns="http://projectmallard.org/1.0/"
      type="topic" style="task"
      id="overview">

  <info>
    <link type="guide" xref="index#main"/>
    <desc>What udpscope plots, the four parts of the window, and one pass through the
    application from connecting to saving.</desc>
    <credit type="author copyright">
      <name>Martino Ferrari</name>
    </credit>
  </info>

  <title>Overview</title>

  <section id="what">
    <title>What udpscope is</title>
    <p>udpscope plots a live UDPStreamer source. One window holds up to eight rows of plots,
    each with up to four traces, and every row shares one time axis, so the whole figure
    scrolls together. Acquisition runs on its own thread and writes a ring buffer sized from
    <cmd>--buffer-mb</cmd>; the drawing thread reads whatever that ring holds when a frame
    starts, which is why a trace never makes the window stutter.</p>

    <p>The stream is the clock. Every interval you read on screen is measured between
    timestamps the source sent, never your machine's, so a stalled source freezes the view
    instead of scrolling it — and a source whose clock steps still gets the window you asked
    for.</p>

    <p>The time axis is <em>relative to now</em>. While streaming it is a fixed
    <code>[-window .. 0]</code> with the newest sample at 0, so x reads as an age:
    <code>-1.5s</code> is a sample a second and a half old. In trigger mode 0 is the event's
    edge instead, and a paused view keeps the ages it was frozen with. The source's own clock
    is still there when you need it — an export writes it as a second column.</p>

    <figure>
      <title>The udpscope window on a live source: the header bar above the plots, the side
      panel on the right, and the status bar along the bottom.</title>
      <media type="image" mime="image/png" src="figures/main-window.png" width="1280" height="800">
        <p>One figure of three rows with four signals enabled, the Measure tab open in the
        side panel, and the status bar reading <gui>live</gui>.</p>
      </media>
    </figure>
  </section>

  <section id="reach">
    <title>How to reach it</title>
    <p>Start the app with a source
    (<cmd>udpscope --server 127.0.0.1 --port 8000</cmd>), or start it with no
    <cmd>--server</cmd> and pick one from the chooser, which lists the sessions you have
    opened before. A unicast source serves one client at a time: if a second viewer connects,
    they take turns and the status bar says so. To watch one source from several instances,
    use <cmd>--multicast</cmd> with the group and <cmd>--interface</cmd> with the local
    address.</p>

    <p>The signals arrive <em>disabled</em>. Nothing is acquired until you turn one on in the
    signal list, and enabling is what starts acquisition — so a freshly opened scope with an
    idle side panel is working correctly, not failing to connect.</p>

    <note style="tip">
      <p>See <link xref="source">Choosing a source</link> for the chooser and the multicast
      options in full.</p>
    </note>
  </section>

  <section id="window">
    <title>The window</title>
    <terms>
      <item>
        <title>The header bar</title>
        <p>Left to right: the time window (<gui>2 s</gui>), the trigger and the pause, the
        events, cursors and side-panel switches, and the menu, which holds
        <gui>Fit to data</gui>, the <gui>Layout editor</gui>, <gui>Export</gui>,
        <gui>Keyboard shortcuts</gui>, <gui>Help</gui> and <gui>About</gui>.</p>
      </item>
      <item>
        <title>The side panel</title>
        <p>Two tabs. <gui>Measure</gui> holds the cursors readout and the measurements
        derived from it; <gui>Signals</gui> holds the trigger and the channel list, where a
        math channel is a row of that one list under a <gui>MATH</gui> heading whose
        <gui>+</gui> creates one. One row per channel: its colour, an enable switch, its name
        and its unit. Channels are dragged from here onto a plot row.</p>
      </item>
      <item>
        <title>The plot</title>
        <p>Up to eight rows, each with its own y axis and up to four traces, all on one shared
        time axis. Right-click a row for its own menu (fit, add a signal, remove a trace).</p>
      </item>
      <item>
        <title>The status bar</title>
        <p>Directly above the plot's bottom edge — the state word, the stored sample rate and
        the window, and the ⓘ beside it for packets, gaps and the buffer's own figures. The
        second screenshot below is what a held capture looks like: <gui>event held</gui>, the
        axis pinned to the event, and the trigger marker at the edge.</p>
      </item>
    </terms>

    <figure>
      <title>A held capture: the trigger has latched, the state reads
      <gui>event held</gui>, and the axis is pinned to the event rather than to the live
      edge.</title>
      <media type="image" mime="image/png" src="figures/trigger-capture.png" width="1280" height="800">
        <p>The trigger marker sits at x = 0 and the pre-trigger share of the window is drawn
        to its left.</p>
      </media>
    </figure>
  </section>

  <section id="first">
    <title>The first five minutes</title>
    <steps>
      <item>
        <p><em>Connect.</em> With no <cmd>--server</cmd>, pick a stored session or type a host
        and port.</p>
      </item>
      <item>
        <p><em>Enable a signal</em> in the signal list. The plot stays empty for the first
        fraction of a second while the first window fills — the buffer holds only what has
        arrived.</p>
      </item>
      <item>
        <p><em>Drag it onto a row.</em> Drop a second signal on another row, or the same
        signal again for a second view of it. The colour is per signal, so it is the same one
        wherever it appears.</p>
      </item>
      <item>
        <p><em>Set the window</em> with the control in the header bar: type a number, pick a
        unit, or step a decade. The trigger's event window is a share of this span, so a
        window change moves it.</p>
      </item>
      <item>
        <p><em>Pause</em> (<key>space</key>) to look at a still picture; the producer keeps
        filling the buffer behind it, and resuming shows what arrived meanwhile rather than a
        hole.</p>
      </item>
      <item>
        <p><em>Arm the trigger</em> (<key>a</key>) and wait for a latch: the view freezes on
        one event, and you can zoom in on it. Disarming mid-capture keeps what the capture
        got.</p>
      </item>
      <item>
        <p><em>Measure it</em> — the measurements pane computes a statistic of the visible
        window, and <gui>show on plot</gui> marks it as a ruler or a pair of markers.</p>
      </item>
      <item>
        <p><em>Save the data</em> with <gui>Export visible range</gui>, which writes the
        plotted signals over the window at the stored rate to <file>.npy</file>,
        <file>.csv</file> or <file>.mf3</file> (MDF 3.30).</p>
      </item>
    </steps>
  </section>

  <section id="knowing">
    <title>Worth knowing</title>
    <list>
      <item><p>A signal nobody enables costs nothing — no buffer, no socket work, no
      measurements.</p></item>
      <item><p>The window remembers itself. Rows, traces, the time window, calibration, which
      signals were enabled, the math channels with their graphs, and the measurements are
      written per host and port, and reloaded the next time you open that source.</p></item>
      <item><p>A very wide window on a fast stream is drawn from averaged groups of samples,
      so the rate in the status bar falls: that is the anti-alias filter, not a fault —
      striding would fold a fast signal back as a slow one, which looks entirely plausible on
      screen.</p></item>
      <item><p>Every instrument the app computed — the trigger marker, the measurement marks
      — is locked to the pointer's reach. The cursors are yours to drag; those are not.</p></item>
    </list>
  </section>

</page>