# Invariants: the plot, the figure and the layout

How `plot::Figure`/`plot::Plot` may and may not be driven, what a row's state belongs to, the layout editor's and the slide-over's overlay children, and the rule that layout must not depend on content.

Part of [CLAUDE.md](../../CLAUDE.md). These are rules that cost a defect to learn; read the ones touching the area you are editing before you edit it.

- **A sidebar's size must be its own, never a divider's position.** `GtkPaned` keeps a child's size in
  `position`, which is a number of pixels **of the window**: the sidebar's width *was* `window - 940`, so on
  any window narrower than 940 px — a scaled display, where the logical width is half what the screen looks
  like, or a window a manager capped — the sidebar came up **0 px wide**, and the only way to see it was to
  drag the divider back. Every patch that kept the paned failed for the same reason (the position derived
  from the paned's own width, re-parenting the column, the property form of its children, size requests):
  the *mechanism* was the fault. It is an **`AdwOverlaySplitView`** now — what a utility sidebar is in
  GNOME, as against `AdwNavigationSplitView`, which is for navigation lists — with `min-sidebar-width` =
  `max-sidebar-width` = 320 in **pixels**, so the width is its own at any window size, and `collapsed` (set
  from the window's width in `tick()`) to *overlay* the plot when there is no room beside it rather than
  being squeezed. `[sidebar-probe]` reads both states: `window=756 sidebar=320` under a 2x scale is exactly
  the case that used to be zero.
- **The sidebar's button is the only input; `AdwOverlaySplitView:show-sidebar` is an output.** The split
  view writes that property *itself* — at startup, and when it collapses — with no user involved, so reading
  it back as the user's wish is wrong: doing that made connecting a source leave the sidebar shut, because
  the widget's own `false` was recorded as the user asking for it. A `GBinding` from the property to the
  toggle is the same mistake in one line, and it cannot be told from a real change by a "is this our own
  write" flag either, since the toggle's signal may fire after the write returns. Instead `App::sidebar_wanted`
  holds the wish (written only by `on_sidebar_toggled`, guarded by `App::sidebar_syncing` around our own
  `set_active`), `update_side_visibility()` is the single place that turns that wish into the panel's visibility
  and "are there signals" into the dock's *sensitivity* (the button stays sensitive), and `tick()` re-asserts both when the widget disagrees —
  which is also why a hide *gesture* does not stick: the panel stays where the button says it is. The
  no-signals case must leave the wish alone, or a source connecting later finds a sidebar the user never closed.
  The wish is the session's `dock` key: a change of it (not a program's own write, and not a restore) schedules a save.
- **`AdwOverlaySplitView:sidebar-width-fraction` is a 0..1 fraction of the window, whatever
  `sidebar-width-unit` says.** Setting a pixel count there (320) is a `GObject` critical, and it silently
  falls back to 0.25 — which reads as "the sidebar is mysteriously 560 px wide" on a wide window with no
  error anywhere the build would catch. Pin the width with `min-sidebar-width`/`max-sidebar-width`.
- **A `GtkPaned`'s position is stated after both its sides are filled**, and that is a fact about the
  *function's order* rather than about the window's shape, which is why it is the one part of the
  window skeleton that cannot live in `main-window.ui`. `gtk_paned_set_position()` clamps against what
  its children ask for *now*: called before the sidebar's panels have been appended it is clamped
  against an empty pane, and the divider lands wherever that left it. Moving the call into the `.ui`
  moved the plot column by about 180 px, which the layout probe read as a different `done_box` and a
  taller figure.

- **`plot::Plot` cannot remove or retarget a trace.** Hence fixed trace slots created
  up front and rebinding via `SlotSeries`; a *name* change (legend text) is the one
  thing that forces a rebuild. Cursors are parked outside the axis range instead of
  removed.
- **A `Figure`'s row count is fixed at construction**, so `RowSet::rebuild_all()` builds
  a *new* figure and the area is handed it (`PlotArea::set_figure()`); it costs no GL
  state. That makes one path for "a row's traces changed" and "the row count changed",
  and it is why `rebuild_all()` restates a pinned event window (`pinned_pre_`/
  `pinned_post_`) instead of re-framing on the live edge — a drop during trigger mode
  would otherwise throw the frozen view onto the stream, where nothing moves it off
  again until the next latch. `PlotArea::create()` is handed `App::placeholder_plot`,
  never a row: the area keeps a reference to the plot it was created with, and a rebuild
  destroys every row.
- **A trace is a slot with a name *and* a channel; a name alone is not one.** `Row::channel[s]`
  is re-resolved by `RowSet::bind()` every frame (slots are identified by name, see above), and
  `-1` means the model built no channel for that name. Some names can *never* bind: the stream's
  **time signal** is skipped by `build_channels_locked()` however often it is enabled, so a slot
  holding it has a name for ever and data never. The plot showed nothing for it, which is why it
  went unnoticed, but the cursors pane's `mix` mode drew one line per *named* slot and so gave
  each phantom a row that could only read `--` — "the pane shows a lot of empty signals that do
  not exist", six lines over three real traces. Two halves to the rule. (1) Anything that counts
  traces counts `channel[s] >= 0`, not `!signal_name[s].empty()` — and a per-frame bind means the
  cursors pane cannot key its rebuild on `generation()` alone, hence `App::cursors_pane_bound`, a
  bit per row/slot (`kMaxRows * kSlotsPerRow` is 32, so one `std::uint32_t`): a trace that
  appears without a structural change still gets its line. (2) `apply_layout()` refuses a name
  that cannot produce a channel (`ScopeModel::is_time_signal()`), because such a name was
  **sticky**: `collect_layout()` writes `signal_name` back verbatim, so one that got into a
  session file was re-saved every session for ever. The refusal also heals an existing file on
  the next save. How the names first got in is unexplained — the drop path already refuses a
  signal with no channel — most likely an older build or a CONFIG whose time signal was not yet
  classified as one; the fix is the stickiness and the counting, not a guess at the origin.
- **A row's contents are state of the `RowSet`, not of the figure.** `insert_row()` and
  `remove_row()` shift that state with `carry_row()` and let `rebuild_all()` re-deal the
  figure handles, so inserting above row 1 moves what row 1 plotted down to row 2 rather
  than renumbering the rows under the user. `carry_row()` deliberately copies fields
  instead of assigning a whole `Row`: a `Row` also holds the figure handles (`plot`, the
  axis and cursor ids) and the `SlotSeries` objects the traces point at, and those belong
  to the row's *position*. It clears the destination's slot bindings for the same reason —
  the next `bind()` re-resolves them, and without the clear the frame in between draws the
  moved row's samples under the new row's legend.
  Both call `rebuild_all()` themselves, so their callers must re-point the area
  (`PlotArea::set_figure()`) directly; `relayout_areas()` is no help, since it only acts on
  a *dirty* row.
- **The layout editor's buttons are *separate* overlay children, never one transparent
  child covering the area.** A `GtkOverlay` child is picked wherever its allocation is, and
  `gtk_widget_set_can_target(FALSE)` takes a widget's children out of picking with it, so a
  full-area `GtkFixed` would swallow every pan, drop and hover the editor is not interested
  in. Each button is therefore a small widget aligned to a corner or the centre and placed
  by its **margins**, and the overlay is only measured from its main child, so moving them
  cannot reach the plot's layout.
  They are placed from `FigureLayout::rows` — the rects the frame was *drawn* from —
  divided by `PlotArea::device_scale()`, because a `Rect` is framebuffer pixels and a GTK
  margin is logical ones. Reading the figure's own rects rather than dividing the widget
  height by the row count is what keeps a `×` on the row it names when the rows stop being
  an equal division. `sync_layout_editor()` runs every frame on purpose:
  `gtk_widget_set_margin_*()` returns early on an unchanged value, so a settled layout costs
  the comparisons and nothing else, and a resize needs no notification.
- **The slide-over is the second thing placed over the plot, and it is one opaque widget, not a
  transparent area.** The same pick rule as the editor's buttons applies, harder: the panel is a
  `GtkRevealer` aligned to the end edge (`halign=END`, `valign=FILL`) at `kSlideOverWidth` = 360 px, so
  its allocation *is* the part of the plot it covers and everything to its left is still the plot's --
  pan, zoom, drop and hover are untouched. A full-area child with a panel drawn in it would swallow all
  of them. Closed, the revealer is `can_target(FALSE)` (and `gtk_overlay_set_clip_overlay()` keeps its
  slide-out inside the plot), so the frames of a slide-out do not eat input either. `[slideover]` reads
  it back: `outside_hits_plot=1 inside_hits_panel=1`. Three consequences:
  the panel **never resizes the plot** (it is an overlay child; `plot_unchanged=1`), its height is the
  plot's and never the page's (each page has a `GtkScrolledWindow` with a `NEVER` horizontal policy that
  does not propagate its child's height), and content that is taller than the plot -- the trigger form
  on a 470 px window -- scrolls inside the panel instead of growing it. The widgets that go in a page
  are reparented into it; their widths must fit 360 minus the border (the trigger form measures 267
  minimum, the E-1608's panels 197). **One page wider than that widens the panel
  for all of them** (the stack measures every page): the signals page's hint line once did, unwrapped, and
  `[slideover] panel=` read 376 instead of 360; the label now wraps.
- **The badge bar has a fixed height and sits outside the overlay.** `badge_bar` is 36 px
  (`height-request`) between `plot_overlay` and the status line, so the plot above it never moves when a
  badge's text changes (`bar_h` = `bar_h_after` in `[badges]`). This is "layout must not depend on
  content" for the new row: a badge's state is a word from a short fixed set and the Source badge's name
  is a kind's display name, so what changes with the stream is the row's *width* (the bar has room to
  spare on the right) and never its height. The badge labels are not ellipsized: a name long enough to
  need it would be a defect of the kind's `display_name()`. Rows that appear by trigger condition appear
  inside the slide-over's scroller, never in the bar.
- **The signal badges live in a scroller, so the bar's minimum width never depends on the signal count.**
  The bar's signals slot holds a `GtkScrolledWindow` (horizontal `EXTERNAL`, vertical `NEVER`) around one
  row of badges and the `+`, because a button row's minimum width is the sum of its children: nine badges
  (the E-1608: eight inputs and the counter) would push the window's minimum width past a laptop screen.
  Past `kMaxSignalBadges` (6) the row is replaced by one "N signals" badge, which also stands for the `+`.
  The bar's height stays 36 px in every one of these states (`bar_h_fixed` in `[sigbadges]`), and
  `bar_min_w` reads the same with one signal, nine signals and the overflow (329 on the E-1608, 336 on UDPS:
  the Source badge of each kind reads differently). A change that makes it grow with the signal count has
  taken the scroller out of the measurement.
- **The dock's width is fixed too** (`side_column` `width-request` 300, the split view's 320 px floor
  and cap), and it holds one scroller with the cursors and the measurements. A
  section's visibility is never what makes the dock taller; the scroller is what absorbs the extra.
- **Trace slots are identified by signal name, not channel index.** Enabling a signal
  or a new CONFIG renumbers the channel list, so an index would silently re-point a
  trace at another signal.
- **Layout must not depend on content.** The y gutter is reserved at the widest label
  `TickFormat::Si` can produce *for an axis with no unit* — a sign, three significant
  figures and a one-glyph prefix, measured and not counted in characters — and only ever
  grows; the status label is ellipsized so
  its text cannot drive the paned divider. Both exist to stop per-frame relayout.
  The reservation deliberately does **not** cover `format_si()`'s `%.3g` fallback
  (`-1.23e-45`), which it used to: that form needs a value past 1e24, so it bought a third
  of the gutter for a label no stream produces, and the floor being a monotone maximum over
  the *measured* need means one that did appear widens the gutter for good anyway. Erring
  wide is not free here — it is a third of the plot's width.
  And **nothing may add slack to the gutter it is told**: `note_y_gutter()`'s argument is
  `layout().y_axis_width`, which is `max(measured, floor)` — partly our own answer coming
  back — so a constant added to it compounds. See the ratchet reading under `layout over N frames` in
  [probe-readings.md](probe-readings.md).
  The same rule is why the activity badge is one glyph in three colours rather than
  three glyphs, why the `rate` field collapses to one figure or a range instead of a
  per-channel list, and why `format_elapsed()` steps to a coarser unit instead of
  letting the counter grow: each is a status field whose *width* would otherwise depend
  on the stream, and the status row is directly above the plot.
  The reservation goes on the **figure** (`Figure::set_min_y_gutter()`, added to the
  plotter for this), not on the rows: `Figure::layout()` clears every row's
  `set_min_y_gutter()` to measure what its own labels need, so a floor written onto the
  rows survives exactly until the next layout.
- **The right-hand band is a want, and the left gutter is a measurement.** The two sides of
  the plot are not symmetric in kind: the left holds the y labels, so it is measured and
  floored; the right holds nothing, so there is nothing to measure and `RowSet` simply asks
  for half the widest time label plus the label padding (`right_gutter_px_`, reserved in the
  same one-shot block). Half a label is the figure that matters: an x tick label is
  *centred* on its tick and a live axis is `[-window, 0]`, so there is always a tick exactly
  on the axes' right edge, and with `axes` flush to the viewport half of that label was
  drawn outside the plot. Both go on the **figure** and for the same reason — the rows have
  to end on one column as well as start on one — which is why `apply_gutters()` applies the
  pair and `rebuild_all()` calls it: a new `Figure` carries neither.
- **A trace's colour is indexed by *signal*, not by trace slot.** `Row::color_index`
  stores it and `signal_color_index()` (ui.cpp) computes it from the signal list, so a
  signal dropped on two rows is one colour and the signal panel's chip names a trace
  unambiguously. `plot::Plot` fixes a colour at `add_trace()`, so changing one needs a
  figure rebuild — which `assign()` already forces. A signal on no plot gets
  `RowSet::unplotted_color()` (grey) rather than no chip, so the panel's rows stay the
  same height.
- **The invalid-span band is data-anchored and reserves no layout space.** `Plot::set_invalid_spans()`
  draws a tinted quad over the span it names; unlike `Plot::set_x_note()` (the `t0` caption), which
  is chrome drawn at a fixed corner of the axes regardless of the data, a band pans and zooms with
  the samples it accuses. The two are the complementary cases: the caption is chrome that data does
  not move, the band is annotation that data does. Both are alike in the second count: neither
  reserves layout space and neither can be picked, so a hole cannot move the layout the labels were
  measured into.

  The band has a **one-device-pixel floor on its width**. A hole of one sample in a window of hundreds
  of thousands is a hundredth of a column, and a fill rounded to zero would drop exactly the case
  the band is most needed for — a sub-pixel hole is invisible as a gap in the polyline and would be
  invisible as a band too without the floor.

  The band carries **three states** and they are a property of the hole, not of the plot: solid
  (`Style::invalid_fill`) while the hole still lacks packets, faint (`Style::invalid_repaired_fill`)
  once `Hole::repaired()` is true, absent once the hole's slots age out of the ring and
  `forget_holes_before()` drops it from the table. A repaired hole is **not** retired early: the band
  is a record of what the window was missing, and retiring it on repair would erase the report the
  moment it became explicable — the faint tier is how the display says "this was missing but arrived
  late". `RowSet` sends one `plot::InvalidSpan` per hole to every row — a gap is in the stream, not
  in one signal — and only in `Live` and `Capturing`, because a `Held` or `Paused` snapshot carries
  its own stamps that the live hole table does not address.

- **`RowSet::signal_color()` is the only route to a trace's colour.** The user can override the
  palette entry per signal (clicking its chip; `set_signal_color()` / `clear_signal_color()`,
  keyed by **name**, because a palette index is positional and a CONFIG renumbers), and that
  override is exactly the state in which two routes to a colour disagree. So `install()` builds
  the trace through this call and all three chip sites — the signal panel, the measures pane and
  the cursors pane — read it too; none of them may index `palette_color()` itself. An override
  marks every row holding the signal dirty (`mark_signal_dirty()`, not `assign()`: what the slot
  *holds* did not change) and the rebuild happens on the frame tick via `relayout_pending`,
  because `relayout_areas()` is the one place that builds a figure and re-points the area at it.
  `UDPSCOPE_PROBE_COLOR_MS` reads the result back out of `plot::Plot::trace()` and out of the
  chip's own markup, since asking the resolver twice would assert nothing.

- **Switching a signal off takes its traces off every plot.** The switch means "do not acquire this", and a
  trace left behind draws nothing: it holds one of the four slots a plot has, reads `--`, and blocks the drop
  that would fill it with something live. `on_signal_switch()` clears every slot by the **signal name** the
  slot remembers -- never the channel index, which is exactly what the enable change renumbers -- and says what
  it did in a notice, because a trace that vanishes silently is its own kind of confusing. The follow-ups (a
  relayout, the panels' chips, the layout save) are done once by the caller rather than per slot. Re-enabling
  does **not** put the traces back: the arrangement is the user's, and guessing where they were is worse than
  leaving them off.