# Compact readouts dock -- step 3 of the badge-bar redesign Implementation Plan

> **For agentic workers:** REQUIRED SUB-SKILL: Use superpowers:subagent-driven-development (recommended) or superpowers:executing-plans to implement this plan task-by-task. Steps use checkbox (`- [ ]`) syntax for tracking.

**Goal:** The dock shows the cursors and the measurements as compact, read-only readouts (about 280 px wide, always on screen); the full cursors panel and the full measurements panel (mode, reset, add, statistics, edit) become the `cursors` and `measure` slide-over pages, reached by an "Edit" text button in the dock, by the `m` key, and by clicking a measurement's dock line.

**Architecture:** A new unit `src/ui_dock.cpp` (spec: `ReadoutsDock`) builds the dock's "Readouts" section: a cursors block (a small grid mirroring `App::cursors_lines`) and a measurements block (one line per `App::measures`). It owns no formatting: `update_cursors_pane()` and `update_measures()` already compute the strings, and they now write them to the page's widget *and* to the dock's, from the one string. `cursors_panel` and the measures panel are *reparented* (as the trigger form and the signal list were) into slide-over pages with ids `cursors` and `measure`. The dock's old contents (the two full panels) leave it.

**Tech Stack:** C++20, GTK4, libadwaita >= 1.8, CMake. No unit-test suite: verification is the app's own headless self-check (`xvfb-run`, mock sources) -- extend `src/ui_probe.cpp` probes, never a separate harness.

Spec: `docs/superpowers/specs/2026-11-02-ui-badges-dock-design.md` ("Right dock", "Slide-over panel", rollout step 3). Earlier plans: `2026-11-02-ui-badges-dock-shell.md` (step 1), `2026-11-03-ui-badges-signals.md` (step 2). Branch: `feature/ui-badges-dock` (continue on it).

## Global Constraints

Copied from the spec and the repository's rules; every task includes them.

- **Right dock (spec, verbatim):** "Fixed width, about 280 px; always on screen, shown but insensitive until the stream has signals ('disable, do not hide'). It stays an `AdwOverlaySplitView` sidebar ... **Readouts** (top): the active cursor values and measurement values, read-only, one compact line per value, through the one formatter both panes share (`invariants-readouts-and-cursors.md`). An 'Edit' affordance opens the slide-over's `measure` or `cursors` page; clicking a measurement row opens that measurement's editor."
- **One formatter:** a readout quotes a stored sample and never a value between two (`docs/claude/invariants-readouts-and-cursors.md`); the dock and the page show the *same string*, set from the same variable in the same call -- no second `format_measure()` call site for the same value.
- **Layout must not depend on content** (`invariants-plot-and-layout.md`): the dock has a fixed width (280 px: `min-sidebar-width` = `max-sidebar-width` in `main-window.ui`), every dock label is ellipsized with a fixed `width-chars`/`max-width-chars`, so a long unit or value never widens the dock; the badge bar keeps its fixed height; the slide-over overlays and never resizes the plot.
- **A `GtkOverlay` child is picked wherever its allocation is**: this step adds no overlay child.
- Page ids: `trigger`, `signal:<name>`, `signals`, `measure`, `cursors`, `events`, `source-<id>`. This step adds `measure` and `cursors`. One slide-over page at a time; each page has its own scroller (`slideover_add_page` provides it); the open page is not saved.
- "Disable, do not hide": with the cursors off, the dock's cursor block stays on screen with `--` cells (the existing blanking in `update_cursors_pane`), insensitive; an empty measurement list shows one dim line, never nothing.
- Text buttons only for new controls ("Edit", not an icon). Existing icon buttons that move into the pages are not changed in this step.
- The widget-lifetime trap (`invariants-gtk-and-chrome.md`): a click handler that calls `rebuild_measures_pane()` / `rebuild_cursors_pane()` destroys widgets it may have been emitted from; hold the emitter with `outlive_the_rebuild(widget)` first. The dock's lines are rebuilt by those two functions, so a click on a dock line must not be handled by a widget that the rebuild destroys synchronously (open the dialog from the handler, rebuild later).
- Every new source file carries the SPDX MIT header (`// SPDX-License-Identifier: MIT` / `// SPDX-FileCopyrightText: 2026 Martino Ferrari`).
- Baselines: a clean build emits exactly **one** warning (the icons' `-Woverlength-strings`), an incremental build **zero**; the dump's `gtk warnings:` reads `0`; no `Gtk-CRITICAL`/`Gtk-WARNING`.
- Verification runs are short and serial; kill every mock you start (`tools/mock_udpstreamer.py` port 8114, `tools/mock_e1608.py` port 54211); seed a tour-seen config so the first-run tour does not close slide-over pages (see `.superpowers/sdd/task-5-report.md` for commands). Do not re-run to chase cosmetics.
- Do not push, merge or amend. Commit per task on `feature/ui-badges-dock`.

## Deliberate step-3 deviations from the spec (state them in the final report)

- **The measurement editor stays a dialog window** (`open_measure_dialog`): the `measure` page holds the list, Add, the Statistics switch and each row's edit button, which open that dialog. Moving the dialog's form into the slide-over is not needed for the readouts and is not done here.
- The `measure` and `cursors` pages hold the existing panels unchanged (heading, mode dropdown, reset, switch, grid / add, statistics, rows), so their content is not re-designed.
- Dock cursor lines carry the same cells as the page's grid (`who`, A, B, delta), at a smaller size; they are not reduced to the time line only, because the modes that read per-row values would then have no readout on screen.

## File Structure

| File | Create/Modify | Responsibility |
| --- | --- | --- |
| `src/ui_dock.cpp` | Create | The dock's Readouts section: build, rebuild of the cursor lines and the measurement lines, the Edit buttons, the click-to-edit on a measurement line, the `[dock]` probe line. |
| `CMakeLists.txt` | Modify | Add `src/ui_dock.cpp` next to `src/ui_badges.cpp`. |
| `src/ui_app.hpp` | Modify | `App::DockCursorLine`, `App::dock_cursor_lines`, `App::dock_measure_labels`, `App::dock_readouts` widgets; declarations. |
| `src/ui_cursors.cpp` | Modify | `update_cursors_pane()` writes each cell's string to the page and to the dock; the rebuild calls the dock's rebuild. |
| `src/ui_measure.cpp` | Modify | `update_measures()` writes each reading to the page's label and to the dock's; `rebuild_measures_pane()` rebuilds the dock lines. |
| `src/ui.cpp` | Modify | Pages `cursors` / `measure` registered; panels removed from `dock_page`; `dock_show_section()` removed; `ShowMeasure` opens the page; dock assembly. |
| `src/ui/main-window.ui` | Modify | Dock width 280 (`min/max-sidebar-width`), `side_column` `width-request` 260, comments. |
| `src/ui_tour.cpp`, `src/ui_context_help.cpp` | Modify | Steps / hints that pointed at the cursors and measurements panels in the dock now open the page (as the signals step does). |
| `src/ui_probe.cpp` | Modify | Probes that walked, measured or scrolled the panels while they lived in the dock; the `dock:` readings. |
| `README.md`, `docs/claude/*.md` | Modify | Task 3. (`USER-GUIDE.md` and the Mallard manual are spec step 4.) |

---

### Task 1: The compact readouts in the dock (panels still in the dock)

The Readouts section is added at the top of the dock, above the existing full panels, so the app stays whole: nothing is removed yet. Both read from the same strings.

**Files:**
- Create: `src/ui_dock.cpp`
- Modify: `CMakeLists.txt`, `src/ui_app.hpp`, `src/ui_cursors.cpp`, `src/ui_measure.cpp`, `src/ui.cpp` (dock assembly, ~line 5161), `src/ui_probe.cpp` (a `[dock]` line in an existing probe)

**Interfaces:**
- Produces (declared in `ui_app.hpp`, defined in `ui_dock.cpp`):
  - `GtkWidget* build_readouts_dock(App& app);` -- the Readouts box (a vertical `GtkBox`: a "Readouts" heading; a cursors block = a row with the "Cursors" label and an "Edit" `GtkButton` (text), then a `GtkGrid` of dock cursor lines; a measurements block = a row with the "Measurements" label and an "Edit" button, then a vertical box of lines). Stores `app.dock_cursor_grid`, `app.dock_measures_box`, `app.dock_cursors_edit`, `app.dock_measures_edit`.
  - `void dock_rebuild_cursors(App& app);` -- called at the end of `rebuild_cursors_pane()`: rebuilds `app.dock_cursor_lines` (one `DockCursorLine {GtkWidget *label,*a,*b,*d;}` per `app.cursors_lines`, same order) in `dock_cursor_grid`. The first row is the same header `cursors_header()` writes (`who`/A/B/delta), small.
  - `void dock_rebuild_measures(App& app);` -- called from `rebuild_measures_pane()` after the page's rows: one line per `app.measures` (signal chip, type name ellipsized, value label), pushing the value label to `app.dock_measure_labels` (same index as `app.measure_labels`). With no measurements: one dim line "no measurements".
  - `void dock_cursor_cell(App& app, std::size_t line, const std::string& a, const std::string& b, const std::string& d);` and `void dock_measure_value(App& app, std::size_t i, const std::string& text);` -- set the dock's labels; no-ops when the index is out of range (mid-rebuild).
- Consumes: `App::cursors_lines`, `App::measures`, `App::measure_labels`, `measure_color()`, `chip_markup()`, `signal_color_index()`, `open_measure_dialog(App&, int)`, `slideover_open(App&, const std::string&)` (page ids used in Task 2; in this task the Edit buttons call it and the page may not exist yet -- `slideover_open` of an unknown id is a no-op; Task 2 registers the pages).

- [ ] **Step 1: Dock widgets and rebuild functions.** Create `ui_dock.cpp` with the functions above. Fixed sizes: dock label `width-chars`/`max-width-chars` of 9 for value cells, ellipsize end, CSS class `caption` and `numeric` (check `ui_widgets.cpp` for the existing CSS before adding any). The whole Readouts box is the first child of `app.dock_page` (insert before the cursors panel with `gtk_box_prepend`).
- [ ] **Step 2: One string, two widgets.** In `update_cursors_pane()` (`ui_cursors.cpp`) replace the `put(line.a, va)` etc. by a helper that sets the page cell and calls `dock_cursor_cell(app, index, va, vb, vd)`; do the same for the blanking branch (`"--"`). In `update_measures()` (`ui_measure.cpp`, the two `gtk_label_set_text(label, ...)` sites that also write `app.measure_text[i]`) call `dock_measure_value(app, i, text)` from the same variable. Never format twice.
- [ ] **Step 3: Rebuild hooks.** `rebuild_cursors_pane()` (ui.cpp ~1564) ends with `dock_rebuild_cursors(app)`; `rebuild_measures_pane()` calls `dock_rebuild_measures(app)` before its final `update_measures(...)`. Both are no-ops until `build_readouts_dock` ran (null guards).
- [ ] **Step 4: Assemble.** In `ui.cpp` where the dock is assembled (after `gtk_box_append(dock_page, measures_panel)`), prepend `build_readouts_dock(*app)` and add its separator. The Edit buttons call `slideover_open(app, "cursors")` / `slideover_open(app, "measure")`; clicking a measurement line (a `GtkGestureClick` on the line box, not on the value label which is selectable) calls `open_measure_dialog(app, i)` with the index stored in the widget data, as `measures_row`'s edit button does.
- [ ] **Step 5: Probe.** Add to the existing cursors probe (find it with `grep -n "cursors" src/ui_probe.cpp`) and measures probe a reading proving the dock agrees with the page: print `dock cursors: lines=<n> page_lines=<n> same_text=<0|1>` and `dock measures: lines=<n> page_rows=<n> same_text=<0|1>` where `same_text` compares every dock label's text to the page label's text. Also `dock_w=<allocated width of the dock readouts box>` and assert it does not exceed the sidebar width. Run with 3 measurements and the cursors on in `Both` mode (cursors mode set via `rows->set_cursor_mode`).
- [ ] **Step 6: Build, run the probes against `tools/mock_udpstreamer.py`, verify `same_text=1`, `gtk warnings: 0`.**
- [ ] **Step 7: Commit** (`git add src/ui_dock.cpp CMakeLists.txt src/ui_app.hpp src/ui_cursors.cpp src/ui_measure.cpp src/ui.cpp src/ui_probe.cpp`; message `ui: compact cursor and measurement readouts at the top of the dock`).

---

### Task 2: The `cursors` and `measure` pages; the dock is only readouts

**Files:**
- Modify: `src/ui.cpp`, `src/ui/main-window.ui`, `src/ui_app.hpp`, `src/ui_probe.cpp`, `src/ui_dock.cpp`

**Interfaces:**
- Consumes: Task 1's `build_readouts_dock`, `slideover_add_page(App&, id, title, widget)`, `slideover_toggle(App&, id)`.
- Produces: slide-over pages `cursors` (title "Cursors", content `app.cursors_panel`) and `measure` (title "Measurements", content the measures panel); `AppAction::ShowMeasure` toggles the `measure` page; `dock_show_section()` and its declaration/uses are deleted.

- [ ] **Step 1: Register the pages** next to the `trigger` and `signals` registrations (`ui.cpp` ~5156): `slideover_add_page(*app, "cursors", "Cursors", app->cursors_panel)` and `slideover_add_page(*app, "measure", "Measurements", measures_panel)`. Remove both `gtk_box_append(dock_page, ...)` of the panels and the separator between them; the dock keeps only `build_readouts_dock` (and, later, step 4's events).
- [ ] **Step 2: Keys and actions.** `AppAction::ShowMeasure` -> `slideover_toggle(app, "measure")`. Delete `dock_show_section()`. Make sure the tour/help code does not call it (`grep -n dock_show_section src`).
- [ ] **Step 3: Dock width.** `main-window.ui`: `min-sidebar-width`/`max-sidebar-width` 280, `side_column` `width-request` 260; update its comments.
- [ ] **Step 4: Badge/header state.** The page ids join the "open" bookkeeping: `slideover_page(app)` reports them; nothing in the badge bar marks them (no badge). The header's Cursors toggle still mirrors the `cursors_switch` inside the page (both exist).
- [ ] **Step 5: Probes.** Fix every probe that read the panels' allocation, sensitivity or scroll position while they sat in the dock (`dock_section_probe`, the `dock:` reading in the layout dump, the `cursors=... in the toolbar, dock=..., reset=... in the cursors pane` line, any that walks `dock_page`): they open the page first or read the widget tree without allocation. Add `[readouts] pages cursors=<0|1> measure=<0|1> dock_children=<n> dock_w=<n>` (pages registered; dock holds only the readouts box; width 280). Re-baseline `.superpowers/sdd/ui-signals-baseline-udps.txt` only where this step explains the difference.
- [ ] **Step 6: Run** the UDPS and E-1608 probe runs serially; `gtk warnings: 0`; Esc closes the pages; the measure Add and the measurement dialog still work from the page (the existing measure probes).
- [ ] **Step 7: Commit** (`ui: the cursors and measurements panels are slide-over pages; the dock is the readouts`).

---

### Task 3: Tour, context help, docs

**Files:**
- Modify: `src/ui_tour.cpp`, `src/ui_context_help.cpp`, `README.md`, `docs/claude/{architecture,verification,probe-readings,invariants-plot-and-layout,invariants-readouts-and-cursors,invariants-gtk-and-chrome}.md`, `help/C/*.page` mentions of the cursors / measurements panels in the dock or the side panel (the full Mallard sweep and `USER-GUIDE.md` are step 4)

- [ ] **Step 1: Tour.** Steps pointing at `cursors_panel`/`cursors_head`/`measures_head`/`side_box` now target the dock's readouts, or open the `cursors` / `measure` page through the existing "tour opens a page" mechanism (`invariants-gtk-and-chrome.md`), as the signals step does. Rewrite the step text: readouts in the dock, "Edit" opens the page.
- [ ] **Step 2: Context help.** Hints attached to `cursors_head` / `measures_head` live in the pages: show only while the page is open, or re-attach to the dock block headings -- whichever the existing layer supports without a second code path (follow how `signals_head` was handled). Run the help-figures probe and the tour probe (`UDPSCOPE_PROBE_*` in `verification.md`) and keep their lines sane.
- [ ] **Step 3: Docs.** README (layout, keys, the dock, readouts, deviations listed above), `architecture.md` (chrome section), `verification.md` and `probe-readings.md` (new `[dock]`/`[readouts]` lines, changed `dock:` readings), `invariants-readouts-and-cursors.md` (the dock and the page share one string: rule and why), `invariants-plot-and-layout.md` (dock width 280, ellipsized cells).
- [ ] **Step 4: Run** the tour/help-figure probes and one E-1608 run; confirm baselines (build 0 warnings, `gtk warnings: 0`).
- [ ] **Step 5: Commit** (`docs: the readouts dock, the cursors and measurement pages`).