The square was the mock's only ideal step, which is the one shape a real producer
does not put on the wire. It is now the truncated Fourier series of the step --
`--square-harmonics N` odd harmonics, default 30 -- so each edge overshoots by the
Gibbs constant (about 9% of the 2 V swing, y = +/-1.179) and then rings, and
`--square-harmonics 0` is the ideal +/-1 step as before.
Odd harmonics only, so the series keeps the ideal wave's edge instants and its
polarity: the level-0 trigger, the glitch's inverted pulse and the buffer search
land where they did. Re-run in pairs (`--square-harmonics 0` against the default),
search, condition legs 0/1, trigrenum, disarm, trig trace, measures and events all
read exactly what they read before, with only `t0` moving. The reading that moved
is the noise probe's group-delay leg, whose `want` is the analytic `tau*ln2` of a
step: a band-limited edge reads `delay=0.002770 ratio=1.255`, the same figure on
every run. That recipe now asks for the ideal step, so its documented number stays
exact; probe-readings says why.
The series is vectorised: as a per-sample Python sum it cost ~15 sin() calls a
sample, which at the fast mock's 1.3 MS/s made the producer the bottleneck and
halved the rate the app saw (the noise probe's span-dependent counts read 22
against 48). Vectorised it adds ~0.5 ms to a 2000-sample packet, so the fast mock
runs at about nine tenths of its declared pace and those counts read within a few
percent.
--drop-every/--drop-burst withhold datagrams the counter and stream clock
have already advanced over, and --reorder-every inverts a pair on the
wire; both are deterministic for the reason --glitch-at is, since a probe
asserts the spacing of what it finds and a random count is not a figure.
A `noise` signal gives the dense-trace and intensity-floor paths a input
that is not piecewise smooth.
verification.md records the measured readings, including the one that is
a finding rather than a baseline: a burst past kGlitchPackets (256) is
read as a producer clock glitch, each bridge advances the anchor by one
packet span against a timeline 300 ahead, and four consecutive failures
then throw the stream onto the arrival clock.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
--glitch-width defaulted to 0.0, so --glitch-at alone produced no glitch and no
warning — the same class of silent no-op that cost a debugging cycle earlier on this
branch. The default is now 0.002 s (2 ms), matching the standalone probe run.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Two defects behind one report ("a trigger during a capture overrides the first,
and the hold-off does not apply"); the second is also what made a spike in one
channel look like the acquisition resetting.
The trigger engine keyed its invalidation on the trigger channel's *index*, which
every rebuild of the channel list renumbers -- enabling a signal that sorts before
it is enough. Any rebuild therefore abandoned an open capture and set no hold-off,
so the next edge inside the post window became t0. It keys on the channel's name
now, which changes only when the source genuinely does.
A packet whose stamps jump more than 256 packet spans ahead is now rejected as a
fault and *bridged* at the declared cadence, instead of poisoning the monotonic
mark (which pinned every later packet flat at the glitched value) and condemning
the next good packet. Only four consecutive failures abandon the declared time
signal, and that fallback no longer wipes the rings: the arrival clock is anchored
to continue from the monotonic mark, so the history is still on one timeline --
the wipe is what made one glitching packet look like the stream restarting from 0.
The declared unit is resolved before those checks, since they weigh the stamps
against a cadence in seconds.
Guards: UDPSCOPE_PROBE_TRIGRENUM_MS prints t0_held=1 through the real widgets,
and the mock's --time-glitch-at/--time-glitch-by injects the clock fault.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
period, frequency and pulse duration counted every sign change about a single
level, which is unusable on any real signal: the mid level is exactly where a
waveform moves fastest, so an interferer faster than the fundamental recrosses
it several times per true crossing. A 5 Hz sine with a 500 Hz tone at a tenth of
the amplitude read 79 crossings for 9, period=0.025622 against 0.2.
MeasureLevel gains a hysteresis band sized once in measure_set_level(): a tenth
of the window's peak-to-peak, clamped to half the room to the nearer extreme so
a threshold set near one stays usable. The band moves the edge decision only --
the sum/count split stays at the bare level, since that split is top/bottom and
has a documented exact reading. The bucket fast path tests the band and the
level separately rather than folding them, or it would refuse exactly the
buckets a crossing passes through: clean cost is unchanged at raw=0.1% and
1.41 ms a recompute.
tools/mock_udpstreamer.py gains --noise, defaulting to 0 so the exact probe
assertions still hold.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The SI prefix ladder in format_measure() was gated on a non-empty unit, so two
decimals of a small unitless value printed `0.00` -- the reading gone, not merely
coarse. That is a whole class of channels rather than a corner: a CONFIG need not
declare a unit, and a math channel never has one. Below 1e-12 the same loss
happened even with a unit, so that range falls back to three significant digits.
With no unit the prefix goes tight against the number (`585.24m`), since the space
exists to separate the number from its unit and a spaced `m` alone reads as metres.
The mock declared `unit="V"` for every data signal, which is why no probe could see
this; it now takes `--unit ''`.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
A UDPS_TIME_FIRST_SAMPLE time signal carries one meaningful value -- the
batch's first sample -- but a scalar signal in Accumulate mode still occupies
num_samples slots on the wire, which a producer fills by repeating that
anchor. Deriving the step from value_of(n - 1) therefore came out as zero, so
every sample of a frame landed on one x, the degeneracy guard tripped, and the
whole stream was timed by packet arrival instead. On a 1 MS/s source that
arrival clock is not monotonic within a frame: the export's time column held
90559 order breaks.
Space the batch by the cadence, exactly as the LAST_SAMPLE branch beside it
already dates its own batch backwards. The export's time column is now
strictly increasing (0 duplicates, 0 backwards steps) and reads the declared
1 MS/s.
mock_udpstreamer gains --time-mode {full,first}; it could only emit
FULL_ARRAY, so nothing exercised this branch. In 'first' it repeats the anchor
across the batch's wire slots -- the shape that produced the defect -- while
still generating the waveforms from the real per-sample stamps.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The flicker ("no data" at no constant frequency, worse with the measurements
and cursors panes up) was a torn read of the window's first stamp: acquire()
pins the window to the ring's oldest slot, and reading it at paint time races
the producer lapping it, returning a stamp one ring span too new. x0() is the
origin every trace point is reconstructed from, so one torn read produced a
refused neighbours(), a filter that dropped three quarters of the points, and
a polyline shifted off its axis. It is cached by acquire() under the lock now.
EventSeries::neighbours() answered from the (x - x0)/dx grid, whose drift from
the real arrival stamps arrives as a constant offset in seconds -- a doubling
share of the screen per zoom step, which is the "zooming into a held event
clips it more from the left" report. Both series binary-search the stamps now.
The measurements pane went through the LOD pyramid rather than reading its
window raw (19.7 ms per recompute to 1.2 ms, 0.1% of a 2 M-sample window) and
recomputes on a cadence; the math engine lost a per-slot heap allocation, a
per-sample source lookup by name and a fetch_add that cost more than the
arithmetic it counted.
The cursors pane's mix mode drew a line per *named* slot, so a slot holding a
signal that can never produce a channel -- the stream's timestamp -- got a row
that could only read "--", and such names were re-saved every session. It
counts bound traces now and apply_layout() refuses them.
Four toolbar icons are drawn for this app and compiled in as a GResource: the
stock ones were a record dot for the trigger and three magnifiers for cursors,
measurements and math.
New probes and dump lines for all of it (trace ink, measure cost, math cost,
event zoom, toolbar icons); README and CLAUDE.md record what they cure.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Martino Ferrari