The bold pass had turned the trigger into half a period — a signal rising above its level — and that
lost the thing the glyph is for: the crossings. A crest and a trough read as a wave; a hump reads as a
hill, and a trigger that shows no crossing names the "above the level" half of an event. The full-period
sine with the dashed level through it is restored, exactly as it was, and the Signals pill carries the
same wave again so the pill and the toolbar button stay one picture.
The Measure glyph keeps the bold redesign, which is the part that was better: two cursors (a cap over two
4px dashes) beside a ruler of two bands with three 2x4 marks and no end caps. The Signals pill also keeps
its two bold channel rows.
Verified: `toolbar icons: trigger=udpscope-trigger-symbolic(ok)`;
`page icons: measure=udpscope-tab-measure-symbolic(ok) signals=udpscope-tab-signals-symbolic(ok)`;
`switcher: policy=narrow pills=2 labels=0 names=2 icon=32x32 size=308x36`; `[side-tab-probe] … advanced=4`;
the Preferences dialog opened in the same run with no "not present"; `make test-ui` 14 files; zero
`Gtk-CRITICAL`. The icons' blob is 12352 bytes, still over the C99 limit, so the clean-build warning count
stays four.
The previous pair were detailed miniatures — 1px ticks, 2px dashes, a 13-column wave — and at 32x16 that
reads as *texture* rather than as a shape, which is what "not clear" looks like. All three glyphs are
redrawn bold: one thick band, two thick dashes, few features.
- **Measure** is two cursors beside the ruler they read against. Each cursor is a cap over two bold
dashes (4px), where three 2px dashes read as a dotted column; the ruler is two bands with three 2x4
marks between them and **no end caps**, because a closed frame reads as a rectangle and costs a fifth
of the ink on two lines that say nothing. This is the layout whose first attempt looked like two icons
in a box — the difference is entirely the weight and the open ends.
- **Signals** is a signal rising above its level beside two bold channel rows. Half a period instead of
a full one: at this size a full period is a zigzag and a hump is unmistakably a wave, and the level's
marks survive on both sides of it instead of being swallowed by the crest.
- **The trigger's own icon** is now the same picture as the Signals pill, so the pill and the button that
turns the trigger on are recognisably about the same thing.
Each was rendered and read back as an ink map at 1:1 and at 2x before it was installed, and three
candidates were compared for the Measure glyph (markers *on* a scale, cursors *over* a ruler, and this):
the first two turned the marks and the shafts into blobs at the crossings. Ink is 18%, 30% and 29%,
inside the range the icons above them set, and everything stays inset two pixels.
Verified: `toolbar icons: trigger=udpscope-trigger-symbolic(ok)`;
`page icons: measure=udpscope-tab-measure-symbolic(ok) signals=udpscope-tab-signals-symbolic(ok)`;
`switcher: policy=narrow pills=2 labels=0 names=2 icon=32x32 size=308x36`; `[side-tab-probe] … advanced=4`;
the Preferences dialog opened in the same run with no "not present"; `make test-ui` 14 files; zero
`Gtk-CRITICAL`. The icons' blob is 11774 bytes, still over the C99 limit, so the clean-build warning
count stays four.
The trigger's toolbar icon was a rising edge, which names only one of the four shape triggers the panel
offers. It is now a sine with a dashed level through it — the trigger's actual job, find the signal where
it crosses this — and the Signals tab's pill carries the *same* picture beside the channel list, so the
pill and the button that turns the trigger on read as the same idea. Both are one period of one-pixel
stairs, the way the plot rasterises its own traces.
Everything is inset two pixels now. The previous drafts ran their level and their bars flush to the cell
edge, which is what makes art look shaved wherever a button's padding or a crop takes a pixel: nothing in
either tab glyph, or in the trigger's, touches an edge.
Each shape was drawn and then read back as an ink map rather than trusted — the first sine came out as a
thin antialiased diagonal (a polygon through whole-pixel vertices has diagonal *edges*), which is why the
band is now per-column stairs; the level-through-the-centre arrangement was chosen over level-above-the-
centre after rendering both, since at these sizes a level nearer the crest merges with it into a blob. The
four glyphs measure 18%, 22%, 25% and 25% ink, inside the range the icons above them set.
Verified: `toolbar icons: trigger=udpscope-trigger-symbolic(ok)` and
`page icons: measure=udpscope-tab-measure-symbolic(ok) signals=udpscope-tab-signals-symbolic(ok)`;
`switcher: policy=narrow pills=2 labels=0 names=2 icon=32x32 size=308x36`;
`[side-tab-probe] … advanced=4`; `make test-ui` 14 files; zero `Gtk-CRITICAL` and no missing icon. The
icons' GResource blob is 12408 bytes — the SVG sources are embedded, comments included — still over the
C99 limit, so the clean-build warning count stays four.
Each tab's icon is now two motifs side by side instead of one in a 16px square: the Measure pill is the
two cursors beside the ruler, the Signals pill the trigger beside three channel rows. A 16px cell carries
one motif — squeezing a pair into it is what turned both into a smear — and the pill has the width for a
pair in a 300px column with two pills in it.
Two measurements decided the size, both of which I had wrong from the outside:
- **GDK paints an icon into a square box whatever the document's aspect.** `gtk_icon_theme_lookup_icon()`
at 32 reports a `32x32` paintable for a 32x16 document, and librsvg fits it: rendered with aspect kept,
the artwork comes out `32x16` inside a 32 request. So the pair is letterboxed, not stretched, and
`pixel_size` 32 draws it at exactly the size it is written — 1:1, so the 2px bars stay crisp. A
fractional scale (24 or 48) is what would blur them, which is why nothing here is drawn at one.
- **The bar does not get taller for it.** `switcher: … icon=32x32 size=308x36`: 36px is what the switcher
measured with 16px icons too, because the pill's fixed height takes a 32px box without growing.
Both glyphs were drawn and then read back as ink maps rather than trusted: the first drafts came out at
39% and 44% ink (a blot beside the house 25–36%), and the tab bar is the last place a shape can be
checked, since no screenshot works under this X setup. The finished two measure 23% and 33%.
Verified: `switcher: policy=narrow pills=2 labels=0 names=2 icon=32x32 size=308x36`;
`page icons: measure=udpscope-tab-measure-symbolic(ok) signals=udpscope-tab-signals-symbolic(ok)`;
`[side-tab-probe] … advanced=4`; the Preferences dialog opened in the same run with no "not present";
`make test-ui` 14 files; zero `Gtk-CRITICAL`. The icons' GResource blob is 11661 bytes, still over the
C99 limit, so the clean-build warning count stays four.
The Measure tab is now `udpscope-tab-measure-symbolic` — the two cursors standing across a ruler — and
the Signals tab is `udpscope-tab-signals-symbolic` — the trigger's rising edge over the channel list it
acts on. Each is a 16px composite rather than one of the icons the toolbar carries: a glyph the toolbar
already uses for one thing means two things the moment a tab shows it too, which is why the ruler alone
and the trigger alone were both wrong here.
The plain ruler stays exactly where it was. `udpscope-measure-symbolic` is the Preferences window's Plot
page icon and is untouched; the tab's pair is a new file beside it, so nothing that already meant "the
measurement ruler" changed meaning. Seven action icons bundled, nine with the two app icons.
Both composites are at the limit of what 16px holds — four features each — so each was drawn and then
*measured*: rasterized and read back as an ink map, since the shapes have to be checked as pixels and the
house range is 25-36% ink (trigger 25, cursors 27, ruler 36). The Signals list is two rows and not three,
so the edge and the list get half the cell each; its bars are all one length, because unequal ones read as
a bar chart and a chart is not a list. The Measure ruler's ends are open on purpose: a closed frame puts
four more pixels of ink at the left and right edges, which is what turns a ruler into a rectangle at this
size. First drafts came out at 39% and 44% ink and were rebalanced to 32% and 36%.
Verified: `page icons: measure=udpscope-tab-measure-symbolic(ok) signals=udpscope-tab-signals-symbolic(ok)`;
`switcher: policy=narrow pills=2 labels=0 names=2`; `[side-tab-probe] … advanced=4` (switching by page
name still works); the Preferences dialog opened in the same run with no "not present"; `make test-ui` 14
files; zero `Gtk-CRITICAL`. The icons' GResource blob is now 11309 bytes, still over C99's 4095-byte
string-literal limit, so the clean-build warning count is still four.
Martino Ferrari
