Two things the lock got wrong, and they are the same mistake seen twice: trigger-off was treated as "the
pane is disabled".
**The configuration was unreachable exactly when it was wanted.** `on_trigger_toggled()` set the trigger
*body* insensitive with the mode — a rule carried over from the five-revealer sidebar, where a closed pane
had nothing to edit. A trigger is configured *before* it is switched on, so switching it off to change it,
or to read what it is set to, is the ordinary way to work. The body is now never disabled; only the
*cursors'* readout still is, which is the pane whose content has nothing to show with the instruments off.
**The locked pane described a trigger that was not running.** With trigger mode off the summary is one
line — `mode: stream (trigger off)` — because the four lines it used to show (signal, condition, level,
mode) describe a trigger that is not there. With the trigger on it is those four plus whatever is not at
its default (`noise band`, `HF reject`, `pre-trigger`, `hold-off`).
The reading changes with it: `trigger panel sensitive …=1` is now a **regression guard** rather than a
state — the trigger's body is always live, so a `0` there means the settings have been locked out again.
Verified in both states, from sessions whose only difference is `trigger_enabled`:
panes: trigger=locked signals=locked body_visible=0 summary='mode: stream (trigger off)'
panes: trigger=locked signals=locked body_visible=0 summary='signal: square | condition: window, rising | level: 0.3 .. 0.6 | mode: single | pre-trigger: 20 %'
trigger panel sensitive before the probe toggled it: 1
The locked trigger pane is 72 px with the trigger off and 192 px with it on. Docs: the invariants' rule
for which body is disabled and why the trigger's is not, the `summary`'s two forms with what each means,
the README's deviation note, and the second `panes:` line renamed to say what it is — the line as the
probe found it, because only a run whose *session* has the trigger off shows the stream form.
Two things the lock shipped wrong.
**The "done" icon did not exist.** `emblem-ok-symbolic` is a breeze icon; Adwaita — which is what this
app runs under — does not have it, so the button that leaves configuration mode drew a missing-image
placeholder, i.e. nothing. Both names are now Adwaita's own: `document-edit-symbolic` (the pencil: edit)
and `object-select-symbolic` (the check: done). This is exactly the silent failure `toolbar icons:`
exists for, so the two `[edit]` buttons get the same treatment: `pane edits: locked=…(ok) config=…(ok)`
is read by clicking into configuration mode and back, so one line carries both names and
`gtk_icon_theme_has_icon()`'s verdict for each. The invariants now carry the rule, including the trap
that a name found under `breeze` is not an answer.
**The locked pane was too compact.** One line could not hold what a user opens the pane for, so it is now
a small definition list: `signal`, `condition`, `level`, `mode` on four lines, and after that only the
figures that are *not* at their defaults — `noise band`, `HF reject`, `pre-trigger`, `hold-off` — because
a line reading "band 0" is a line that says nothing. The channel is resolved from the acquired channels
and the condition quotes the figures its own shape reads (a width and its comparison, two levels, or a
timeout), never one it ignores. The pane is ~192 px tall locked against 580 in configuration mode.
One self-inflicted critical on the way: the probe read the summary with `gtk_label_get_text()`, and the
container is a grid now — `Gtk-CRITICAL: assertion 'GTK_IS_LABEL (self)' failed`. The text comes from the
sync that writes it instead.
Verified: `pane edits: locked=document-edit-symbolic(ok) config=object-select-symbolic(ok)`;
`panes: trigger=locked signals=locked body_visible=0 summary='signal: square | condition: window, falling
| level: 0.3 .. 0.6 | mode: single | noise band: 0.2 | pre-trigger: 20 % | hold-off: 1000 ms'`;
`make test-ui` 14 files; zero `Gtk-CRITICAL` and no missing icon.
Two panes, two modes. **Locked** is what a returning user gets: the trigger pane shows one line saying
what it is set to, the signal list shows only the signals that are on, and neither offers a control that
changes the configuration — each heading has an `[edit]` button (the Adwaita `emblem-system-symbolic`,
swapping to `emblem-ok-symbolic` in configuration mode) that flips its pane. A **first run** — no session
file for that source — never reaches `apply_layout()` and comes up in configuration mode, because
configuring the host is what a first run is for. The mode is a mode and not a setting, so it is
deliberately not persisted.
The locked signal list drops the rows of every signal that is off, which is the whole of "show active
signals": the list already filters on nothing, so the lock is one `continue`. With the rows go the acquire
tick, the overflow menu (Information, Calibrate…, Delete, rename) and the `MATH` divider's `+` — and the
colour chip stops being clickable, because choosing a colour is configuration too. Dragging a signal onto
a plot stays: that is which view shows what, not what the scope is set up to do.
**The trigger is persisted, settings and state both** — the settings *even while it is off*, which is the
point: a trigger configured once and switched off is still the trigger you come back to. `LayoutState`
gains fifteen flat `trigger_*` keys; the channel is stored by *name* (every rebuild renumbers the
channels, the model's own rule) and the two enumerations as **the words the panel's dropdowns show**,
because an index ties the file to a declaration order — the lesson `math_op_at()` already carries. The
words are shared with the panel now (`trigger_type_text()` and friends build the dropdown arrays), so the
two cannot drift.
Two ordering traps, both found by running it:
- **The channel name resolves twice over.** `rebuild_trigger_signals()` picks up
`App::pending_trigger_channel` when the stream arrives *after* the load, and `apply_trigger_layout()`
resolves it itself when the channels are already there — without the second path the name stayed
pending past the one rebuild that would have used it, and the trigger silently sat on channel 0
(`summary='pulse width · sine …'` where the session said `square`).
- **The trigger's state is applied by pressing the control, not by setting a flag**: the toggle is set
*outside* the `updating_panels` window `apply_layout()` uses, because a toggle set inside it emits
`toggled` into a handler that returns at once and nothing would happen — no arming, no events button,
no sensitivity.
Verified, in both modes and both directions:
panes: trigger=locked signals=locked body_visible=0 summary='window · square · 0.3…0.6 · 20 % pre'
panes: trigger=config signals=config body_visible=1 summary=''
signals panel: labels=2 list=1 rows=7 signals=2 math=4 divider=1
The locked trigger pane is 42 px tall against 580 unlocked. A hand-written session round-trips: every
value it named came back in the panel's own controls, `trigger=1/1` (the state arrived and the pane's
switch followed it), and the file the app wrote back carried all fifteen keys with the untouched ones at
their defaults. `[side-tab-probe] … advanced=4` on its documented recipe; `make test-ui` 14 files; zero
`Gtk-CRITICAL` and no missing icon.
Docs: the `panes:` reading with what each field means, the corrected `labels=` note (the panel's frame is
counted above the list now, because the heading sits in a heading row), the invariants for both the
persistence and the lock, the README's deviation note, and the removal of its claim that the trigger has
never been persisted — it is now, and the locked view is built from exactly that.
The trigger pane and the cursors pane now have a `GtkSwitch` in their heading, and it is *one control in
two places* with the header bar's button: both run the same action (`run_app_action()`), and
`sync_panel_switches()` re-reads each pair from the toolbar's state after any change, so clicking either
end moves both. A pane whose feature is off is disabled, which is exactly the state you need the switch
in, so it belongs *in* the pane rather than only in the toolbar.
Three things it needed:
- **The sensitive target moved to the pane's body.** A control inside an insensitive parent cannot be
clicked, so a switch that greyed out with its own pane could never turn it back on. `on_trigger_toggled`
and `on_cursors_toggled` now disable `trigger_body` / `cursors_body`, and so does the startup default;
the headings, with their switches, stay live.
- **The trigger's heading moved out of `trigger-panel.ui`** and is built in `build_trigger_panel()`,
which returns the heading row and the panel together. It has to be a sibling of the body for the switch
to stay usable, and keeping it in the file would have meant the file owning a widget the code must
arrange. The file's own panel is unchanged otherwise, so the `[trigger panel:]` counts still read.
- **A guard on the sync.** Setting a `GtkSwitch` emits `notify::active` for a programmatic write just as
it does for a click, so without `App::panel_switch_sync` the program's own write would come back as a
click and flip the feature again.
Readings, both directions in one line:
trigger panel sensitive before the probe toggled it: 0; … ; pane switches live while their panes are off=1
panel switches: trigger=1/1 cursors=1/1 drove_toolbar=1 (pane switch / header bar button)
`pane switches live …=1` is the design's point and is read before anything turns either pane on; `0` would
be a switch drawn, greyed and useless. The trigger pair is moved from the *toolbar* end and the cursors
pair from the *pane* end, so the line carries both halves of the sync, and `drove_toolbar=1` is the pane's
own switch having turned the cursors on with the button following. `trigger panel sensitive …=0` is the
body, not the panel.
Verified: the two lines above; `[side-tab-probe] … advanced=4`; `make test-ui` 14 files; zero
`Gtk-CRITICAL` and no missing icon. Docs: the new reading in `probe-readings.md` with what a `0` means,
the invariants bullet for the one-control-in-two-places rule and its two traps, the sidebar bullet's
sensitive target, and the README note on why the switch is in the pane.
Each tab's icon is now two motifs side by side instead of one in a 16px square: the Measure pill is the
two cursors beside the ruler, the Signals pill the trigger beside three channel rows. A 16px cell carries
one motif — squeezing a pair into it is what turned both into a smear — and the pill has the width for a
pair in a 300px column with two pills in it.
Two measurements decided the size, both of which I had wrong from the outside:
- **GDK paints an icon into a square box whatever the document's aspect.** `gtk_icon_theme_lookup_icon()`
at 32 reports a `32x32` paintable for a 32x16 document, and librsvg fits it: rendered with aspect kept,
the artwork comes out `32x16` inside a 32 request. So the pair is letterboxed, not stretched, and
`pixel_size` 32 draws it at exactly the size it is written — 1:1, so the 2px bars stay crisp. A
fractional scale (24 or 48) is what would blur them, which is why nothing here is drawn at one.
- **The bar does not get taller for it.** `switcher: … icon=32x32 size=308x36`: 36px is what the switcher
measured with 16px icons too, because the pill's fixed height takes a 32px box without growing.
Both glyphs were drawn and then read back as ink maps rather than trusted: the first drafts came out at
39% and 44% ink (a blot beside the house 25–36%), and the tab bar is the last place a shape can be
checked, since no screenshot works under this X setup. The finished two measure 23% and 33%.
Verified: `switcher: policy=narrow pills=2 labels=0 names=2 icon=32x32 size=308x36`;
`page icons: measure=udpscope-tab-measure-symbolic(ok) signals=udpscope-tab-signals-symbolic(ok)`;
`[side-tab-probe] … advanced=4`; the Preferences dialog opened in the same run with no "not present";
`make test-ui` 14 files; zero `Gtk-CRITICAL`. The icons' GResource blob is 11661 bytes, still over the
C99 limit, so the clean-build warning count stays four.
The Measure tab is now `udpscope-tab-measure-symbolic` — the two cursors standing across a ruler — and
the Signals tab is `udpscope-tab-signals-symbolic` — the trigger's rising edge over the channel list it
acts on. Each is a 16px composite rather than one of the icons the toolbar carries: a glyph the toolbar
already uses for one thing means two things the moment a tab shows it too, which is why the ruler alone
and the trigger alone were both wrong here.
The plain ruler stays exactly where it was. `udpscope-measure-symbolic` is the Preferences window's Plot
page icon and is untouched; the tab's pair is a new file beside it, so nothing that already meant "the
measurement ruler" changed meaning. Seven action icons bundled, nine with the two app icons.
Both composites are at the limit of what 16px holds — four features each — so each was drawn and then
*measured*: rasterized and read back as an ink map, since the shapes have to be checked as pixels and the
house range is 25-36% ink (trigger 25, cursors 27, ruler 36). The Signals list is two rows and not three,
so the edge and the list get half the cell each; its bars are all one length, because unequal ones read as
a bar chart and a chart is not a list. The Measure ruler's ends are open on purpose: a closed frame puts
four more pixels of ink at the left and right edges, which is what turns a ruler into a rectangle at this
size. First drafts came out at 39% and 44% ink and were rebalanced to 32% and 36%.
Verified: `page icons: measure=udpscope-tab-measure-symbolic(ok) signals=udpscope-tab-signals-symbolic(ok)`;
`switcher: policy=narrow pills=2 labels=0 names=2`; `[side-tab-probe] … advanced=4` (switching by page
name still works); the Preferences dialog opened in the same run with no "not present"; `make test-ui` 14
files; zero `Gtk-CRITICAL`. The icons' GResource blob is now 11309 bytes, still over C99's 4095-byte
string-literal limit, so the clean-build warning count is still four.
Each sidebar page gets its own glyph and no visible text. The Measure tab reuses the ruler
(`udpscope-measure-symbolic`, the icon its deleted toolbar toggle used and the Plot preferences page
still carries); the Signals tab gets a new `udpscope-signals-symbolic` — three rows of a colour chip
and a name, which is what that tab mostly is — rather than a second copy of the trigger glyph, since
one shape meaning two things in one window is worse than a new one. Its bars are all one length: a
set of unequal ones reads as a bar chart, and a chart is not a list.
`AdwViewSwitcherPolicy.narrow` alone does **not** give an icon-only bar. Measured on libadwaita 1.10
by walking the switcher's tree: with `narrow` and a title, each pill holds a `GtkImage` *and* a
`GtkLabel` — 48px of "Measure" inside a 54px pill. So the pages' `title` is **empty** (their `name` is
what identifies them to `select_side_tab()` and to the session file, and both are unchanged) and the
words are re-attached in code: `name_side_tabs()` runs on the first tick — the pills are
`AdwViewSwitcher`'s own and exist only once it is mapped — and gives each pill a **tooltip and an
accessible name** from the page's name, then hides the empty label that would otherwise leave the
icon off-centre. An icon-only pill is still a named control for a screen reader, and the page icon
that does not resolve leaves a *blank* pill, which is why it is read like the toolbar's icons are.
Two readings, because the claim is two claims:
switcher: policy=narrow pills=2 labels=0 names=2
page icons: measure=udpscope-measure-symbolic(ok) signals=udpscope-signals-symbolic(ok)
`labels` counts *mapped labels with text* — a plain mapped count reads 2 either way, because the
narrow pill keeps an empty label in its layout — and `pills=2` is the guard that makes it mean
something: with nothing mapped the rest of the line is void rather than a pass.
Docs: the icon census (six action icons, eight bundled, and what each of the two new users is), the
switcher bullet in `invariants-gtk-and-chrome.md` with the measurement above, the two new dump lines
in `probe-readings.md`, the re-measured GResource figures in `verification.md` (icons 8613 -> 9842
bytes, help 514660 after this session's help rewrite; the count stays four), and the README recording
that the design spec had the switcher showing titles and neither page an icon.
Verified: `make test-ui` 14 files; `[side-tab-probe] … advanced=4` (tab switching by name still
works with empty titles); `signals panel: … divider=1`; `[math-probe] 3 math channels`; zero
`Gtk-CRITICAL` and no missing icon.
`UDPSCOPE_PROBE_SIDE_TAB_MS` is the one reading for the design's §5 rule -- the statistics
accumulator keeps running on the hidden page -- which nothing tested before. It switches to
Measure, forces one pass so there is a baseline, switches away to Signals and reads again two
seconds later: `advanced=4` is the assertion, and `advanced=0` is the defect where the
accumulation is gated on the visible tab, which would leave a gap in min/max/avg for exactly as
long as the trigger was on screen.
Two things the probe has to do for itself, and getting either wrong makes `advanced=0` a lie
about the tab:
- it **enables its own signal**, because a signal starts disabled (enabling is what starts
acquisition) and a probe that waited for one to be on would be reading another probe's side
effects -- and `UDPSCOPE_ENABLE_ALL_MS` is not part of this run;
- it **assigns that channel to a plot**, because a channel with no trace leaves the live window
*still*, and a still window is precisely the state `update_measures()` is supposed to skip.
Measured the hard way: without the assignment the probe read `advanced=0 min_n=0` with the view
pinned and only four passes in twelve seconds, none of them the tab's doing.
Docs: `probe-readings.md` gains the probe's entry and the signals panel's new shape
(`rows == signals + 1 + math`, `divider=0` a list that lost its `+`), loses the whole `math
panel:` entry, and follows `pane_sensitive=`, the gone `revealed=` field, the six toolbar
controls and the tab-reading `m`/`g` key pairs. `verification.md` gains the probe's bullet and
the re-measured warning figures. The invariants record the sidebar as a switcher above a stack
with a scroller per page, the hidden-page trap that replaces the unrevealed-revealer one for it,
that a feature's on/off is sensitivity rather than visibility, that a math channel is a row of
the signal list, and that a cursors-off readout blanks to `--` with the panel left on screen.
`shortcuts.ui` and the help page's window and sidebar bullets stop describing five revealers.
The README records the deviation from `SPECS.md` that names the panes as separate collapsible
sections.
Verified: `[side-tab-probe] page=signals rows=4 accums=4 advanced=4 min_n=16`;
`signals panel: labels=2 list=1 rows=9 signals=4 math=4 divider=1`; `panels: … (page_current=1)
(sensitive=0) switcher=1`; `toolbar icons:` six controls with every name `(ok)`, with the
Preferences dialog opened in the same run; zero `Gtk-CRITICAL` and no missing icon.
`set_data_pin()` takes a range and `pin_event_window()` a pre/post
split; the file view handed the split to both. On a recording whose
stamps start before zero that stored a pin that no longer held the
data, so every second frame found the pin wrong and stated it in full
again -- rewriting the group's x range and discarding the user's
gesture with it. The view alternated between the file's span and the
corrupted one at the frame rate: a flicker in which no pan, zoom or
click survived. `[drop-probe]` now reports the view and the count of
pin statements, which must stay at two for a whole run.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The loader pushed one slot per file row while the plan decimated by
eight, so a 10 M-row file overran the ring and only its last 4.19 s
survived -- a 20 s recording that read as a 4 s one. Each group of
`time_stride` rows is now averaged into one slot at the group's mean
stamp, as the packet path already does, and the load line reports
rows and decimation so a filtered file cannot be mistaken for a
truncated one.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
`UDPSCOPE_PROBE_NOISE_MS=3000` collides with `enable_all_probe`'s own last act, which fires at
`ENABLE_ALL_MS + 2000` = 3 s: that lambda walks `signal_list` for the front channel's acquire
tick and clicks it, and a probe that installs a math graph at the same instant rebuilds the
signal panel under it. The off-step then emits `active` on a freed `GtkCheckButton` --
`GLib-GObject-CRITICAL: instance with invalid (NULL) class pointer`, stack in
`enable_all_probe()::{lambda}` -- which the baseline ("no Gtk-CRITICAL at all") counts as a
finding. Confirmed by bisection: armed at 3 s it is reproducible, at 4 s it is gone, and a plain
exit-dump run shows none.
That fragility is the probe's, not the feature's, and it is now documented beside the recipe: every
documented probe time is offset from `ENABLE_ALL_MS + 2000`, not merely from the other probes.
The reading times move with it (legs ~11.5 s, de-noise ~16.5 s, both inside the same 18 s exit),
and the corrected run reproduces every documented figure bit for bit.
Readings at 4 s: `setup channels=1`, `trigger band: bare=49/2 band=7/2 ratio=7.00`,
`trigger hf: hf=7/2 band+hf=7/2 band=7`, `pw`/`period band`/`period hf` exactly 0.200000,
`measure windows=2`, `denoise raw=2.987696/1 denoised=2.000000/1 ratio=0.669 channels=1`, no
`Gtk-CRITICAL`.
The probe gains a staged chain rather than one phase, and the schedule moves with it:
`UDPSCOPE_PROBE_NOISE_MS` now times the *setup* stage, which installs the de-noise graph through
`apply_math_channels()` -- a structural rebuild that replaces the buffer and drops its history --
five seconds before anything scans it. The legs and the five measurements then run at about
10.5 s, and the reading that says the median rejected every impulse at 15.5 s, so the documented
run needs a 20 s mock and an 18 s exit.
The de-noise channel is installed **disabled** and enabled only at 13 s, for its own reading. An
acquired channel is a share of the ring, so a fifth one shortens every channel's retained span --
and the six `BufferSearch` leg counts and `pkpk bare` are all peaks and counts *of that window*.
Installing it enabled (as the plan had it) moved `bare` from 49 to 21, `ratio` from 7.00 to 3.00
and `pkpk bare` from 2.988 to 2.488, i.e. it would have rewritten the older feature's documented
proof to record a regression that is not one. With it enabled only at the end, every reading from
Tasks 4 and 8 is bit-for-bit what the doc records, and the new line reads
`denoise raw=2.987696/1 denoised=2.000000/1 ratio=0.669 channels=1` -- `denoised` exactly the
clean sine's 2.0, which is the claim the node makes.
Two other findings, both folded in: a derived channel whose source is switched off through the
panel's checkbox follows it off and does *not* come back when the source returns (the enable-all
probe's last act switches `sine` off at ~3 s), and the probes reload leftover math channels from
`$XDG_CONFIG_HOME/udpscope`, which is why a `setup channels=` count above 1 means an earlier run's
session, not a defect.
`math_probe` gains a third channel with a `DeNoise` node so the editor's median row is built and
synced on a baseline run: `3 math channels on 'sine' and 'noise'`, every other line as before,
`math cost: 103.3 ns/slot` (one reading of the same path).
verification.md: the recipe, and why the two stages may not be collapsed -- a probe that rebuilt
the buffer under its own legs reads `bare=0` and looks like a broken comparator. Also that the
noise and math probes may not share a run: both write `app.math`.
Five measurements on the same spiked `sine`, asking for corners 0, 50, 0, 0, 50 on one
channel: two windows under the (channel, fc) key, which is what exercises it.
measure pkpk bare noise=10.0 hf=0.0 value=2.987692 the stimulus, impulses included
measure pkpk hf noise=10.0 hf=50.0 value=1.990075 the waveform: pass one is filtered
measure period noband noise=0.0 hf=0.0 value=0.021290 supposed to be WRONG -- the control
measure period band noise=25.0 hf=0.0 value=0.200000 the band alone
measure period hf noise=0.0 hf=50.0 value=0.200000 the reject alone
measure windows=2 the corner is part of the key
`pkpk hf` is the reading that says the filter reached *pass one* and not only pass two; a
value near 3 means it did not. `period noband` is deliberately the defect the band exists to
fix, and a future reader who "fixes" it has removed the check.
The band leg asks for **25 %** rather than the 10 % default, and that is arithmetic rather
than a workaround: the band is a share of the *window's* peak-to-peak, which with the
impulses in it is about 3, so 10 % is a half-band of 0.3 -- less than the 0.5 an impulse
moves the signal by. `MeasureOptions::noise_pct`'s own rationale says 10 % holds to a 0.3
interferer, and this mock's is 0.5, so the default could not clear it. The default band is
what the `period noband` and `period hf` legs are about.
verification.md now says the noise and measurement probes must not share a run: both push
onto `app.measures` and the later one would read the earlier one's rows.
Two rows in the measure dialog, built the way the threshold and side rows are and appended
beside them: the band as a percentage of the window's own peak-to-peak (the unit the engine
takes), the corner in Hz with 0 off. They are seeded when editing, shown only where they do
something -- the band for the crossing types, since it moves the edge decision and nothing
else, the reject for all of them, since it sits before both walks -- and read into
`MeasureOptions` on apply.
They persist as two *named* keys, `noise` and `hf`, on the same `o <<` chain as the keys
beside them and read back through the same keyed reader, so a session written before this
change loads with 10.0 and 0.0: today's behaviour exactly, with no version check.
[configs] now proves the round trip rather than assuming it. The probe sets the first
measurement's band and corner to 7.5 and 250 before saving, so a key that never reached the
file reads back as the defaults:
[configs] round trip read=1 comment='written by the configs probe' ... measures=4 math=0 noise=7.5 hf=250
The rest of that line is unchanged, and the run is free of Gtk-CRITICAL.
Six legs over one retained buffer, each a full rising-edge search through `BufferSearch` at
level 0, run back to back without yielding so every leg sees the same samples: the bare
comparator on a spiked sine, a 0.8 band, a 50 Hz reject, both, and the reject's group delay
on `square` -- which carries no impulses, so a one-pole's crossing of zero after a step is
exactly `tau*ln2` and the delay is an exact prediction rather than a coincidence.
trigger band: bare=49/2 band=7/2 ratio=7.00
trigger hf: hf=7/2 band+hf=7/2 band=7
trigger delay: clean=4 filtered=4 delay=0.002206 want=0.002206 ratio=1.000
`ratio >= 5`, both HF legs within 2 of the band, `ratio` between 0.7 and 1.4, `state=2` on
every leg, no Gtk-CRITICAL. `bare` and `band` are proportional to the retained buffer, so
neither is a fixed number; the ratios and the agreement between legs are the assertions.
The probe enables the signals it measures itself rather than relying on another probe's side
effects -- `enable_all_probe` ends by switching one off again, which is how `sine` was missing
from the first run of this one -- and arms in two phases because that enable is a structural
change that replaces the store, so the ring has to fill before there is anything to search.
Its "no stream" line now names the channels that *are* there: an index alone says a probe
found nothing, not what it saw.
Two label-only rows in trigger-panel.ui (band_row, hf_row, after holdoff_row and before
mode_row) and the two spins the code appends into them: the band on the level spins' scale
in signal units, the HF reject at 0-1e7 Hz with 0 off. Both are published with the other
fields -- read before the model lock is taken, assigned inside it -- and both join the
value-changed loop, so editing either republishes the condition.
The rows are shown per type: the band for every type but Dropout, which is an absence a
band cannot describe, and the HF reject for all of them, since it sits before every
comparison. `sync_trigger_rows()` resolves a row as its spin's parent rather than keeping a
second handle to it: the row comes from the file and holds one child.
The exit dump counts the panel's controls, so it reads controls_inside=15/15 now -- and the
probe confirms it, along with both search readings and no Gtk-CRITICAL:
[udpscope] trigger panel: boxes=15 controls_inside=15/15 search_widgets=4/4 search_inside=4/4
A derived channel cannot be computed from a signal nobody acquires: `Source` resolves to a
*channel*, and a disabled signal has none -- so a channel that reads one silently computed
nothing, which is what "all math signals depending on it do not compute anymore" looked like
from outside.
Rather than leave it enabled and blank, the channels that read the signal follow it off:
`disable_dependent_math_channels()` walks the graphs to a **fixpoint**, because one math
channel may name another, and the switch goes through the same path the pane's own toggle
uses -- `MathChannel::enabled` then `apply_math_channels()`, the single writer -- so the
pane's switches follow. Their traces leave the plots with the signal's, and the notice says
both halves.
The channels that do *not* read it are untouched, which is the assertion's other half:
[enable-all-probe] switched 'sine' off: traces_left=0 (want 0)
math_off=[math x2,math3] math_on=[math lp]
notice=''sine' is off: 1 trace left the plots; math off: math x2 and 1 more'
`math x2` and `math3` both source `sine`; `math lp` sources `noise` and stays on. The probe's
switch step now runs late enough that a math probe armed behind it has installed its graphs,
which is why the earlier reading was empty -- `app.math` had nothing in it yet, not
"no dependants".
Re-enabling the signal does not switch them back on, for the same reason it does not restore
the traces: that is the user's decision, and the rule is written down in
invariants-math-channels.md.
`set_math_channels()` rebuilt the store for any change, and a rebuild replaces the buffer:
every channel in the window started again, which is the "modifying one expression invalidates
all the others" report.
The plan is a *partition over the channels*, so it only moves when the set moves. When the
set is unchanged -- same channels, names and enables -- nothing is rebuilt now: the store is
untouched, every other channel keeps its samples and its runtimes, and the surgical path
prepares and recomputes only the affected graphs. The affected set is the edited channels plus
whatever *names* them, because one channel's output is another's input, and the recompute
computes the whole list in order (the inputs have to be there) while writing only those in
the mask -- which is why the step-loop is now `math_apply_locked(sample, write_mask, timed)`.
Adding, removing or renaming a channel still moves the plan, and still rebuilds.
[math-probe] graph edit: stored_slots 800 -> 900 (want the second at least the first, and non-zero)
The count grows because the stream keeps filling while the edit runs; the point is that it
never falls to 0, and that every channel afterwards still reads `N samples vs M time slots`
with N == M.
The switch in the signal list means "do not acquire this", and until now a trace of it
stayed on its plot drawing nothing: a slot that holds one of the four a plot has, reads
`--`, and blocks the drop that would fill it with something live.
`on_signal_switch()` now clears every slot that holds that signal, by the **signal name**
the slot remembers -- never the channel index, which is what the enable change renumbers --
and says what it did: `'sine' is off: 1 trace left the plots`. The follow-ups (a relayout,
the panels' chips, the layout save) happen once rather than per slot.
Re-enabling deliberately does not put the traces back: the arrangement is the user's, and
guessing where they were is worse than leaving them off. Say the word if you want that
direction too.
[enable-all-probe] reads it end to end -- it enables every signal, assigns the channels
across the rows, then switches one off *through its own acquire tick*:
[enable-all-probe] switched 'sine' off: traces_left=0 (want 0) notice=''sine' is off: 1 trace left the plots'
which is also why the notice shares the status line's warning styling from the previous
commit: the trace leaving the plots is something the user should see happen.
The refusal was never silent -- `on_drop_channel()` has always set a notice -- but the
status bar renders `notice + " | " + glance` in one label, so "plot 1 already holds
four signals" arrived looking like part of the routine text a reader skims, which is the
"no clear user feedback" report. The probe's own reading showed it plainly: the label held
`plotting 'sine' on plot 1 | live · 4.44 kS/s · 2 s window`.
Three changes:
- While a notice is fresh the status label carries the stock `.warning` class, so a message
looks like a message and the class goes when the notice does. Every notice benefits, not
just this one.
- The refusal says what to *do*: "plot 1 holds four signals already: drop it on another
plot, or add a row with the layout editor (L)".
- The drop's inline notice now goes through `set_notice()`, the one setter, instead of
writing `app.notice` and its deadline by hand.
[drop-probe] reads the whole path, with the row filled first so the drop under test is the
refusal:
full row refused the drop: 0 (want 0)
refused feedback: notice='plot 1 holds four signals already: ...' warning=1
the status line, composed: warning=1 status='plot 1 holds four signals already: ... | live · 9.97 kS/s · 2 s window'
The label is read in the third line and not the second on purpose: the status line composes
the notice into itself on its own cadence, so a beat after the refusal it may still hold the
previous text -- which the first attempt at this reading mistook for the fix not working.
The row limit is not silent in the same way: the layout editor's `+` is insensitive at
`kMaxRows`, which is a control that says "no" by being unusable rather than a message.
The window control is a GtkMenuButton whose popover autohides -- which works for as long as
GTK holds the popover's grab, and the grab is what can go missing: a window manager moving
it, the nested popover the unit dropdown opens taking it, and every headless run, where
there is no manager to hand one out at all. After that a click anywhere else in the window
leaves the bubble up, which is the "sometimes it is awkward to close" report.
`on_window_popover_press()` states the rule outright instead of relying on the grab: any
press that reaches the window's own surface closes it. That needs no hit test beyond the
button -- a popover is its own surface, so a click *inside* it never arrives here -- and the
button is left alone, because its own click is the toggle that closes it. The press gesture
is on the window in the capture phase, so a widget under the press (the plot's own gestures
among them) cannot hide it.
[windowpop] reads both halves, with autohide turned off for the probe -- the state a user
meets when the grab goes missing:
[windowpop] opened=1 visible=1 click_gestures=2
[windowpop] after a press elsewhere: active=0 (want 0)
[windowpop] after a press on the button: active=1 (want 1)
`click_gestures` is read as well as the handler, so "the rule works" and "the rule is
connected" are two facts rather than one.
src/ui/events-pane.ui holds the pane: the GtkRevealer that slides it in, the header with
the way back to the live stream, the Compare and Accumulate actions, and the list inside
its scroller. The rows stay in code -- one per latched event, rebuilt whenever the cache
changes -- and their sensitivity stays with update_group_buttons(), which is why the file
only starts the two actions insensitive.
Two statements moved into the file along with the widgets, because they are about what the
pane is for rather than about a default: multiple selection, and activation on *double*
click. With single-click activation the plain click that builds a selection would replay
the event instead.
Read back as `events pane: compare=1 accumulate=1 list=1 revealer=1 nested=1`, where
`nested` is the list being inside the revealer -- the one thing a lost id cannot show. The
[events] probe is the other half and drives the pane end to end: recording, trigger, the
history button, a row click and the replay, then Compare and Accumulate, so the file's
buttons are read by being clicked. check_ui: 13 ok, 0 failed.
The first half of this plan row. src/ui/math-panel.ui holds the panel: the box and its
margins, the heading row with the title and the add button, and the list the channel rows
go in. The rows stay in code -- each is a channel with its name, unit, expression, colour
and its own edit and remove buttons -- so the file holds the frame, as in the measurements
and signals panels beside it.
Read back by a dump line that also reads the file's own text:
`math panel: head=2 buttons=1 list=1 title='Math channels'`, where buttons=0 is a lost
`+` and title='-' a lost label. `[math-probe]` still drives the add and opens the editor,
so the rows landing in the file's list is read as well as the frame.
The other half is the node editor's chrome, which is where least of that file is template:
the canvas is a GtkDrawingArea that is drawn rather than declared, and the gestures, the
parameter fields and the palette are code. That is its own change.
src/ui/signals-panel.ui holds the panel's shape: the box and its margins, the heading,
the hint that says what a signal is for, and the list. The rows stay in code -- one per
signal, carrying that signal's switch, colour, calibration and drop targets, rebuilt
whenever the stream's signals change -- so the file holds the frame, which is the shape
the plan gives this slice.
The list's width-only size request moved with it, comment and all: a height floor there
made the list occupy 120 px whatever it held, which hid the compact rows' height behind
it.
Read back by a new dump line, `signals panel: labels=2 list=1`, where a lost id reads as
`labels=1` or `list=0` instead of a panel quietly missing its hint; `panels: … row_h=26`
still reads the list's geometry and the height a row takes. check_ui is at 10 ok.
The panel's shape -- the heading, one labelled row per setting, the two buttons that
run it, and the search block -- now lives in src/ui/trigger-panel.ui. Every control
that carries a value stays in code and is appended into the file's row: a dropdown's
model and a spin's range are the application's, a label is text a translator owns, so
that is where the line runs. `row_for()` is `labeled_box()`'s arrangement with the
labels moved into the file; the thirteen old calls to `labeled_box()` here are gone and
its eleven uses elsewhere are untouched.
`sync_trigger_rows()` now guards the rows it shows and hides, because a row that comes
from the file can be missing rather than merely misnamed.
The frame is read back by a new dump line:
trigger panel: boxes=13 controls_inside=13/13 search_widgets=4/4 search_inside=4/4
where `controls_inside` is what a drifted id breaks -- a control built and never placed
leaves the panel with a field missing and nothing else complaining -- and
`[defaults] trigger: 0.001 0.002 0 0.001 0 50 0.01` still reads the seven spins in the
same tree order, which is the check that the restructure kept the panel's contents.
Two days of grief came out of one GTK fact, now in the invariants: an expander's child
is not in the widget-parent chain (`gtk_widget_get_parent()` is NULL for it even after
the window is presented, while `gtk_expander_get_child()` returns it), so the probe
walk had to start there instead of at the panel. The throwaway program that settled it
is what stopped the workaround -- a second root in the file plus a code attach -- from
being the answer.
The dump line's two new fields, and what either of them disagreeing with
[stats-probe] on= means: a .ui that lost the widget, or the wiring to it. pane_rows is
what proves the readout rows landed in the frame's measures_list.
The last hand-built UI outside ui.cpp. The window, its header bar, its two pages and the
four buttons that are about the chooser rather than about a source now live in
src/ui/source-chooser.ui; the rows stay in code because a source row and a waveform row
are data, rebuilt whenever the known hosts or the recent files change.
The pages were a GtkNotebook and are an AdwViewStack under an AdwViewSwitcherBar, which
is what current libadwaita asks for and the same information without a tab strip. The
three actions moved from a button row at the foot into the header bar, the shape
source-form.ui already uses -- and deliberately without receives-default, since Enter
must keep activating the selected row.
Nothing carries a value: the tooltips and labels moved as they were, the handlers are
the same functions, and the switch is by page *name* rather than by index.
The probe reads the frame back -- `[sources] chooser ui: page='sources' title='Sources'
icon=yes page='waveforms' … switcher_wired=1 buttons=[prefs=1 new_host=1 open=1
cancel=1]` -- so a .ui that lost an id is named instead of opening a window with a hole
in it, and `check_ui` type-checks the file against the GIR (7 ok, 0 failed).
Two things the checks caught while doing it: the new frame dropped the call that fills
the waveforms page (the unused-function warning), and `AdwViewStackPage` is a GObject
that *wraps* a child rather than being one, so reading the pages needs
adw_view_stack_get_page().
Fifteen display strings in the two preference forms were written as GTK mnemonics -- `_Directory`,
`_Server`, `Multicast _group`, `_Theme` and the rest -- but the property that makes GTK read them was
never set, so GTK drew the underscore literally: `_Directory` in the row, not a D with a line under it.
Two switches are involved, FALSE by default in each case. `GtkLabel`/`GtkButton` take `use-underline`;
the rows take `AdwPreferencesRow:use-underline`, "whether an embedded underline in the title indicates a
mnemonic". The two buttons in the source form already set it (so their mnemonics worked and showed no
underscore); the thirteen rows did not. All thirteen now do.
The row classes that carry the property are not all related -- AdwEntryRow has its own, while AdwSpinRow,
AdwComboRow and AdwSwitchRow get it through AdwActionRow -- so the probe reads it by name on a GObject
(g_object_class_find_property, then g_object_get) rather than casting to one row type; a cast to a
`GtkWidget*` where the type is only forward-declared does not compile at all.
`_Cancel` and `_Connect` both claimed C in the same form, so Alt+C could only reach one of them: that
marker was unreachable, which is worse than absent because it is in the source to be trusted. `_Connect`
becomes `Conn_ect`, freeing C for Cancel.
[prefs-probe] reads the count (4/4) on the real widgets; check_ui validates the property against the GIR
for every object in every .ui file, inherited properties included.
The toolbar button was the panel's only input: `update_side_visibility()` derived the
panel from the button and never the other way, so the button went on saying "shown" in
two cases where the panel was off -- while there were no signals to show, and after
anything else moved the split view's state.
Binding the two together is not the fix. AdwOverlaySplitView writes `show-sidebar`
itself, at startup and when it collapses, with no user involved; a binding pushes that
into the button, the button's handler reads it as the user's wish, and the sidebar then
never comes back when a source connects -- a worse bug than the one reported, and one
that a "was this our own write" flag does not catch either, because the toggle's signal
may fire after the write returns.
So the direction is stated instead of inferred: `show-sidebar` is an output, the button
is the only input, and `App::sidebar_wanted` holds the wish between them. The wish is
written by the toggle's handler alone (guarded while we set the button ourselves), the
no-signals case forces the panel off without touching the wish, and tick() re-asserts
both from the wish when the widget disagrees -- so a hide gesture does not stick either.
[sidebar-probe] now reads the pair (shown vs button) in both states and against a hide
that did not come from the button; shown=1 button=1 with a source, shown=0 button=0
without, and the source reconnecting brings both back is the reading this exists for.
The sidebar's width was a GtkPaned divider position: `window - 940` in pixels. On any window
narrower than 940 px the divider landed past the right edge and the sidebar came up 0 px wide,
reachable only by dragging the divider back.
Every attempt that kept the paned failed for that reason -- deriving the position from the paned's
own width, re-parenting the column, property-form children, code-set size requests. The mechanism was
the fault, so it is gone: the row is an AdwOverlaySplitView, which is what a utility sidebar is in
GNOME, with min-sidebar-width = max-sidebar-width = 320 in pixels. Its width is therefore its own at
any window size, and when there is no room beside the plot it *overlays* the plot (collapsed, set from
the window's width in tick()) instead of being squeezed to nothing.
Two things found on the way, both recorded in the invariants:
- sidebar-width-fraction is a 0..1 fraction of the window whatever sidebar-width-unit says. Setting a
pixel count there is a GObject critical and it falls back to 0.25, which is why the sidebar first
read 560. The width is pinned with min/max instead.
- the window opened at its content minimum (756 px, the plot column plus the sidebar) because the
explicit gtk_window_set_default_size() was dropped when the window moved into the .ui. Restored.
[sidebar-probe] reads both states and is the guard: window=756 sidebar=320 under a 2x scale, which is
the case that used to read 0.
`side_w` is the sidebar column's width, and it must be its own request (320) rather than 0. It turned
a report of "I cannot see the right side panel" into `side_w=0` in one run, which is what a reading is
for.
It also shows the shape of the fault: the width is 320 during the first frames and 0 once the window
settles, while the divider sits at 940 and the plot column ends around 752 -- so the paned is not
giving the sidebar any width, whatever the column asks for.
Four attempts to fix that here were each reverted, because each one left `side_w=0`: placing the
divider from the paned's own width instead of an absolute 940, the property form of the paned's
children, re-parenting the column in code, and a code-set size request on the scroller and the column.
The cause is not one of those, and the next step is to read the paned's own width and the column's
parent chain rather than to guess again.
src/ui/preferences.ui is an AdwPreferencesDialog whose rows are libadwaita's own -- AdwEntryRow,
AdwSpinRow, AdwSwitchRow, AdwComboRow, AdwButtonRow -- instead of a label and a bare GtkEntry in a
GtkBox. There is no Apply button: a row applies as it changes, which is what those widgets are
designed around, and [prefs-probe] reads the settings file back after every change.
The folder chooser is cancellable now, so a picker still open when the dialog closes cannot write
into a row that is gone; the cancellable is also how the probe takes the cancel path without a
mouse.
Two traps cost a run each and are recorded in docs/claude/invariants-gtk-and-chrome.md: an
AdwDialog is not a GtkWindow (it cannot parent a GtkFileDialog, and in floating mode it adds a
native surface to gtk_window_get_toplevels() that is neither a widget nor a window), and a .ui
that is not listed in the GResource is a Gtk-ERROR at runtime rather than a build failure -- which
is exactly what the probe opening every window is for.
GTK4 and libadwaita. It receives one UDP stream through the vendored
udpsclient, buffers it in a large ring, and draws it with the vendored
plotter: a trigger with a pre/post event window, a pause that freezes the
window, cursors, measurements, math channels in a node editor, an event cache,
named configurations, preferences, and an export of the visible window to
.npy/.csv. Waveform files can be opened and analysed in place.
The interface is two threads -- a producer that owns the socket and the GTK
main thread that owns every widget and the GL context -- sharing one model
under one mutex, with samples crossing through lock-free rings.
deps/plotter is a submodule pinned to the commit this tree builds against;
deps/udpsclient is vendored in place. docs/claude/ documents the rules that
cost a defect to learn, and SPECS.md is the requirement document.
Re-measured all four recorded cases and added a fifth for the re-plan path,
which needs 100 kS/s: at 10 kS/s the ring already covers 838 s, so no window
the control can reach moves time_stride and the window probe re-plans nothing.
Also notes that `stale` is 0 by construction while resequencing is on, and that
the reservation cap is counted in packets, so its sample cost scales with the
batch.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
A finite trigger_time() only says the edge was accepted; the mode is Capturing
until the post window fills. Every field the report prints is read from
display_snapshot(), whose stamps span x = 0 only once the event is Held, so
reporting on the latch alone raced the capture: leg 2 printed
`measured=nan at0=nan ... mode=1` on one run and the documented
`at0=-0.500907 earlier=-0.498185 mode=2` on the next. The report now waits for
Held under the same poll budget, and says `latched but never held` when it runs
out -- a different defect from `no latch`, so the line names which.
The readings are corrected against three consecutive leg-2 runs and one leg-3
run: `t0` is a rebased stream stamp and varies every run, so it was never an
assertion; `hits=` likewise tracks the arm phase (12 at one arm, 11 at another).
The mode ordinals were wrong -- `mode=2` is `Held`, not `Capturing`. Shapes 2
and 3 are now measured rather than read from the arm code; shape 1 still is not.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- 08-trigger.txt: names all four condition shapes and the buffer search; fixes the first
paragraph and 'How to reach it' to match what the panel actually contains (fix 3).
- 10-measurements.txt: adds a Statistics bullet — one observation per recompute, what
resets the history, what does not (fix 3).
- probe-readings.md: re-quotes condition-probe lines with level2= and mode= fields;
corrects leg-2 window geometry (0.2 s / 10 % pre, not 1.0 s / 50 %); moves the
wide-window reason to legs 1 and 3; fixes the search-probe scheduling note
(search_probe calls condition_probe directly; do not also set CONDITION_MS) (fix 6).
- verification.md: corrects shape-2 window geometry to match the code (fix 7).
- invariants-session-and-export.md, README.md: document the measure_stats session key —
position, type, default false (fix 8).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Two defects behind one report ("a trigger during a capture overrides the first,
and the hold-off does not apply"); the second is also what made a spike in one
channel look like the acquisition resetting.
The trigger engine keyed its invalidation on the trigger channel's *index*, which
every rebuild of the channel list renumbers -- enabling a signal that sorts before
it is enough. Any rebuild therefore abandoned an open capture and set no hold-off,
so the next edge inside the post window became t0. It keys on the channel's name
now, which changes only when the source genuinely does.
A packet whose stamps jump more than 256 packet spans ahead is now rejected as a
fault and *bridged* at the declared cadence, instead of poisoning the monotonic
mark (which pinned every later packet flat at the glitched value) and condemning
the next good packet. Only four consecutive failures abandon the declared time
signal, and that fallback no longer wipes the rings: the arrival clock is anchored
to continue from the monotonic mark, so the history is still on one timeline --
the wipe is what made one glitching packet look like the stream restarting from 0.
The declared unit is resolved before those checks, since they weigh the stamps
against a cadence in seconds.
Guards: UDPSCOPE_PROBE_TRIGRENUM_MS prints t0_held=1 through the real widgets,
and the mock's --time-glitch-at/--time-glitch-by injects the clock fault.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Clicking the coloured chip in the signal list opens a GtkColorDialog and the
colour it returns overrides that signal's palette entry. Held by name, like
every other identity here, and persisted as a session `[[color]]` table.
RowSet::signal_color() becomes the one resolver: install() builds the trace
through it and all three chip sites read it, because a chip exists to say which
trace a row is about and an override is exactly the state in which two routes to
a colour would disagree. A grey chip names no trace and so is not clickable, and
the way back is `Default colour` in the signal's menu -- a setting with no undo
is a trap.
The gesture sits on the existing label rather than in a GtkButton: padding on
this row is what made the signal list twice as tall once. It claims its sequence
so a click on the chip cannot become the start of a row drag.
UDPSCOPE_PROBE_COLOR_MS reads the result out of plot::Plot::trace() and out of
the chip's own markup, with an override in no palette slot, so neither leg can
pass by asking the resolver what it already said.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The file was 1967 lines and is auto-loaded into every context, so every
session paid for the whole of it to reach one invariant. It now carries the
project's goal, the three facts that are always relevant, and a table of
contents; the body is fourteen files under docs/claude/ reached by link
rather than by import, so nothing is loaded until it is asked for.
The content is moved verbatim -- the only edits are each file's own header
and the cross-references that became cross-file ("see the invariant below"
is now a link to the file that owns it).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Martino Ferrari