The trigger pane gains the display the user asked for and the library now provides, and the
persistence it already had is renamed to what it is.
**Persistence is one image; the last-N-traces display is "multiple events".** Both live in a new
`Advanced` expander in the trigger panel, together with the settings that are set up once and left
alone. `persistence` (a switch) turns on the plotter's `Plot::set_density()` for every row:
every triggered acquisition is accumulated into a screen-sized intensity grid drawn behind the
traces, brightness being how many acquisitions covered a cell -- no depth to choose, no memory
that grows with the acquisitions (2.2 MB over four 573x412 rows in the probe's run). `fades by`
picks the fade the user asked for: **acquisitions** (each keeps a factor of what was before it,
0.5 by default -- the phosphor afterglow) or **time** (a time constant in stream seconds, so the
display fades while you watch whatever the trigger rate).
- **Trigger mode only, as asked.** `apply_density()` (the tick) states the display on for `Held`
and `Capturing` and off for `Live`, `Waiting`, `Paused` and a file, and turning it off drops the
grid at once rather than at an acquisition a quiet trigger never sends. It is unpickable and
reserves no layout space, exactly as the invalid-span bands are: a density can never be in the
way of a cursor or a drop, and it cannot move the framing.
- **One deposit per acquisition, one frame after the frame that frames it.** `Plot::accumulate_density()`
deposits what the plot holds through the transforms of its *last* layout -- the frame's own is
computed inside the paint that follows the tick -- so `density_pending` is set beside
`record_pending` and consumed by the next tick. In the same tick it was right on a Held-to-Held
transition and wrong on the first latch, whose axis was still the live ring's. Switching the
display on under an acquisition already on screen deposits it too, so the switch does not appear
to do nothing until the next latch (`single` mode may never send one).
- **The session carries it**: `trigger_density`, `trigger_density_decay` ("acquisitions"/"time",
the words the panel shows), `trigger_density_tau` and `trigger_density_factor`, written whether
or not it is on -- and `trigger_persistence` still means the multiple-event depth, so an older
file is unchanged.
- **The library changed twice under this**: the deposit now counts a cell **once per trace per
sweep** (counting the hits put one dense sweep at the ceiling of the brightness scale and hid the
sweeps behind it -- the probe's `on` leg read `peak=18` for a single sweep and reads `peak=1`
now), and a frame's upload is every row's rather than the last row's. Both are in the plotter's
own commit.
`UDPSCOPE_PROBE_DENSITY_MS` reads it all back off the plots -- the plotter's own `ink()`/`peak()` --
with the panel's own widgets driving the switch and the fade, in four legs: **off** (`rows=0
ink=0.0 peak=0.0000`), **on** (`rows=4`, `peak=1.0000`), **step-acquisitions** (`peak=1.0000 ->
1.5000`, the factor then the new sweep) and **step-time** (`ratio=0.367879`, `1/e` for `dt = tau`).
It also reads the frame cost as an A/B **inside one run** (the accumulators at the switch against
the frames after it): `tick 0.74 -> 9.99 ms`, `draw 2.09 -> 20.91 ms` at four rows and 2.2 M cells
on llvmpipe.
Acceptance: clean build 0 errors and exactly the three documented warnings (12352-byte GResource
blob, two `MathNode::source`), `test-ui` 13/13, `test-help` green, a plain run with **0
Gtk-CRITICAL / Gtk-WARNING** and `gtk warnings: 0`, and the panel's own frame reading
`boxes=16 controls_inside=15/15 advanced_widgets=5/5 advanced_inside=5/5` (the block's controls
counted from the expander's child, which is not in the widget-parent chain -- and the search
block's walk now names *its* expander instead of "the first one", which the second expander would
have stolen).
Docs: the trigger/pinning invariants carry the rule and its five consequences, `probe-readings.md`
the four legs and the dump line, `verification.md` the probe's sequence and assertions, and the
manual's trigger page explains both displays to a user.
Two changes in the trigger pane, landed together.
**Persistence.** Trigger mode keeps the last N published acquisitions and draws them fading toward
the background, N being a panel control (1..8, default 1) with N=1 meaning today's behaviour
exactly, so the knob is the switch. The layers are the accumulate path's own -- one layer per
(signal, age) in the row's free trace slots, named with the accumulate vocabulary so
`layer_base_name()` strips the suffix and `signal_color()` resolves the base signal -- so a layer is
not a signal: the signal list, the colours and the measurements see one row per signal.
`ScopeModel` retains the outgoing snapshot in seven atomic `shared_ptr` slots (no lock, no copy; the
snapshot already exists) and a layer's channel is resolved **by name inside the snapshot**, because
the channel list is renumbered by any structural change since that acquisition was cut.
`RowSet::sync_layers()` re-plans from the rows and the depth alone, so a latch costs no rebuild, and
`event_data_window()` skips layer slots so an older acquisition can never re-pin the axis. The
schedule is 0.5^age -- the acquisition on screen at full brightness and each older one half the
previous, independent of N, so raising the depth adds dimmer acquisitions rather than rescaling the
ones already on screen. Memory is bounded by the ring's own `--buffer-mb` rather than by the depth,
which is the bound that cannot be driven into an OOM, and the panel says when either bound bites.
This also wired up `set_trace_alpha()`, which the accumulate path was setting and nothing was
reading -- so the documented 0.35 translucency of an accumulation was opaque in fact.
**Force.** In the trigger pane beside Arm/Disarm, shown only while trigger mode is on: one
acquisition now, with the configured window. It is a synthetic edge rather than a second publisher
-- the engine opens one capture at the present moment and everything else is the ordinary latch, so
a forced acquisition is cut, pinned, framed, recorded and cached exactly like a latched one, and
the button owns no window and no publish. The pre-trigger gate is deliberately skipped (capture now
is a request for the history that exists, and the snapshot reports its own shorter pre_s), a
capture already filling is refused rather than restarted, and the state afterwards is the mode's:
Normal stays armed, Single disarms. The request is one atomic flag written under the model mutex
with `armed` -- the producer reads `armed` at the top of a packet and the request at the bottom, so
a request written between the two would be dropped -- and consumed at the end of a packet, after
the channel loop and before the pending publish.
**A defect fixed in passing, in the function Force was modelled on:** `on_arm_clicked()` passed
`TriggerConfig::channel` (an index into `channels()`) to `set_signal_enabled()` (an index into
`signals()`). With one signal acquired, arming switched on the stream's clock signal and left the
watched signal untouched -- and since a signal the panel was not showing is a change, it rebuilt
the buffer under the click, dropping the very pre-trigger window the arming, and now the Force, was
about to capture. Measured before: `0.0100 s of history behind it`; after: `2.5299 s`.
`trigger_signal_index()` is now the one resolution, used by both buttons.
Two defects behind one report ("a trigger during a capture overrides the first,
and the hold-off does not apply"); the second is also what made a spike in one
channel look like the acquisition resetting.
The trigger engine keyed its invalidation on the trigger channel's *index*, which
every rebuild of the channel list renumbers -- enabling a signal that sorts before
it is enough. Any rebuild therefore abandoned an open capture and set no hold-off,
so the next edge inside the post window became t0. It keys on the channel's name
now, which changes only when the source genuinely does.
A packet whose stamps jump more than 256 packet spans ahead is now rejected as a
fault and *bridged* at the declared cadence, instead of poisoning the monotonic
mark (which pinned every later packet flat at the glitched value) and condemning
the next good packet. Only four consecutive failures abandon the declared time
signal, and that fallback no longer wipes the rings: the arrival clock is anchored
to continue from the monotonic mark, so the history is still on one timeline --
the wipe is what made one glitching packet look like the stream restarting from 0.
The declared unit is resolved before those checks, since they weigh the stamps
against a cadence in seconds.
Guards: UDPSCOPE_PROBE_TRIGRENUM_MS prints t0_held=1 through the real widgets,
and the mock's --time-glitch-at/--time-glitch-by injects the clock fault.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Martino Ferrari