A stop whose target is on another page of a stack was entered without
switching to that page, so the spotlight aimed at a widget that was not
on screen. A stop now declares the page it stands on (`TourStop::page`)
and the tour selects it as the step is entered -- the window's trigger
and signals stops put the sidebar on Signals, the chooser's tabs stop
shows the Waveforms page and stepping off it brings Sources back.
The stop filter moved into `tour_begin()` and now runs on
`gtk_widget_get_mapped()`: GTK 4.24's `is_visible()` ignores
`child_visible`, so it kept a stop on another page *and* one in a
collapsed pane alike. A wrong page is kept and selected; a collapsed
pane, whose stack is unmapped too, is still dropped.
The contextual help becomes the affordance the ask names: a plain (i)
(`dialog-information-symbolic`) at **16x16**, and one that sits beside the
control it explains rather than only in a pane's heading.
- The mark: `GtkMenuButton` ignores `min-width` on the widget and a size
request, so the size is made in `install_css()` on all three nodes (outer
`menubutton`, its `button` subnode, the glyph). Measured 16x16 against the
default 34x34; the dump prints it as `hint=WxH`, measured with
`gtk_widget_compute_bounds()` on the first *visible* hint.
- More sites: `events_record` (the "record events" switch in the trigger
panel), `trigger_advanced` (the pre-trigger share row), `signals_config`
(the signals pane's hint line, wrapped in a box so a hint can join it).
Hints join as siblings, so none can cover a switch, pencil or dropdown.
- The source chooser gets its own layer -- `chooser_sources` (a new heading
above the saved-source list) and `chooser_waveform` (the waveforms action
row) -- built with the one `context_help_button()` both windows use and
re-synced by its Help menu's toggle. The form's `AdwEntryRow`s cannot host a
sibling hint, so none is invented for the host/port fields.
- The tour is one implementation over two windows: `ui_impl::TourView` plus a
list of `TourStop`s; each window keeps its own table. A walk that passes its
last stop calls `on_done`, and the chooser's sets `Config::tour_pending`, so
a first run is one tour that crosses from the chooser into the app. The
chooser's tour auto-starts from `settings.tour_seen` exactly as the window's
does, and its "Guided tour" row now starts *it* instead of only requesting
the window's.
- Probes: `UDPSCOPE_PROBE_CHOOSER_TOUR=1` / `UDPSCOPE_PROBE_CHOOSER_TOUR_MS`,
the hint size in the `help layer:`/`[helpui] contextual on:` lines, and the
chooser's hints in its `chooser ui:` line. Docs updated in
invariants-gtk-and-chrome.md, probe-readings.md and verification.md.
The tour measured its card with a height-for-width request whose for_size
came from the natural width minus the margins the tour sets for positioning.
A measure reports margins *included*, so that for_size landed a margin short
of the minimum the box answers with and GTK warned once per frame:
Trying to measure GtkBox 0x... for width of N, but it needs at least M
(about 9/s for as long as the tour was up). The card now takes its size from
gtk_widget_compute_bounds() once a frame has run -- its allocation rectangle,
not gtk_widget_get_width(), which is only the content box -- and falls back
to a measure with no for_size at all only on a frame with nothing allocated.
GTK is built with structured logging, so its messages reach the log writer
and never the handler API; no existing probe can read one. The exit dump now
counts them (`gtk warnings:`, must read 0) through a writer function chained
to g_log_writer_default(), which leaves stderr unchanged.
The contextual help was on by default, so a first run met a window with a "?"
beside every surface it had not asked to have explained; `contextual_help` now
defaults to false and the layer is asked for from the Help menu, from the
chooser's new help menu, or with Ctrl+H.
The source chooser runs before `App` exists, which makes it the window a user
who does not know how to start is looking at, so it now carries the same three
help affordances the window's Help view does: Documentation (the manual is
another process and needs nothing of the app), Enable contextual help (a row
whose check *is* the setting, written to the file the app reads a moment
later), and Guided tour. The tour is drawn on the app's own window, so the
chooser can only record the wish: it sets `Config::tour_pending` -- the value
`main()` owns and hands to both `choose_source()` and `run_ui()` -- and
`on_activate()` starts it once the window is up and laid out, through its own
callback so the readings can tell a request from the first-run auto-start.
The rows are the window's own `menu_button()`/`menu_toggle()`; `install_css()`
therefore runs from `choose_source()` (it is idempotent now) so the popover
gets the `.udpscope-menu` rules before it is shown.
Opening the manual could also fail with a message that blamed the handler
whatever was missing. `help_installed_path()` now resolves `help:<id>` the way
the specification does and the failure alert says which of the two it is: with
the set installed it names the viewer, without it it names the identifier, the
expected installed path and the install command. `show_help()` gained an
optional reporter, which `UDPSCOPE_PROBE_HELP_MS` uses for a new reading --
`[help] launch attempted= done= ok= error='' installed=` -- since a successful
launch leaves no window of ours to observe.
Tested: clean --clean-first build, three warnings as documented; test-ui 13/13
and test-help pass; no Gtk-CRITICAL in the help, helpui and chooser runs.
The hamburger menu's help rows were three flat entries and a window. They are a **`Help` submenu**
now, which is where every GNOME menu keeps them, with the four things a first run cannot find:
- Keyboard shortcuts Ctrl+/ (the existing overview, `show_shortcuts()`)
- Documentation F1 (the existing manual, `show_help()`)
- Guided tour Ctrl+T (new)
- Enable contextual help (new, a stateful row: its check *is* the setting)
The submenu *replaces* the menu's rows rather than floating beside them, the same shape and the same
reason as the plot's right-click menu: a submenu torn out of the menu it belongs to is a second thing
to dismiss, and the `GtkMenuButton` that owned one toggled itself out of sync the moment anything
else closed its popover. It is the pages of a `GtkStack`, not a rebuild of the box and not a swap of
the popover's child: the main view holds `app.layout_toggle`, which the tick's `sync_layout_editor()`
and the `L` accel read, so rebuilding would leave that pointer on a destroyed widget, and a swapped
child would leave the view that is not showing without an owner.
**The contextual help is one table and a "?" per surface** (`src/ui_context_help.cpp`): the plot, the
trigger, the cursors, the measurements, the math channels, the signals, the event history, the time
window, the status line, and the math editor's identity row. Each row names the *heading box* its
button joins -- a sibling of the title, never an overlay child on a corner, which is what would cover
the switch or the [edit] button already there -- so adding a surface is a row and a widget pointer.
Off means *gone*, not greyed: the buttons are removed, and they are found by a data key rather than a
list of pointers because the math editor's heading is built afresh on every opening and a list would
go stale one dialog later. `contextual_help` and `tour_seen` are keys of `settings.toml`, written
through the same `Settings`/`load_settings()`/`save_settings()` the Preferences dialog uses, whose own
rows start from `load_settings()` and so carry them through untouched.
**The guided tour is five steps on a `GtkOverlay`** above the window's content: the plot, the side
panel, the trigger, the signals and the status line. There is no popover in it and therefore no pointer
grab to leak -- four dim rectangles around the hole are what make it modal -- and the probe asserts
that as a reading (`controllers=` against the count taken before it opened) rather than as a claim.
Everything is placed from `gtk_widget_compute_bounds()` re-read on every frame, because a widget's
allocation is 0 on the frame it is first shown and a window resize moves it under a one-shot
measurement; the hole is kept from the last frame that could measure the target, because a frame that
lands between two layout passes would otherwise empty it and make the spotlight jump. `Skip`, `Finish`
and `Escape` all hide every child and leave nothing behind.
A first run gets the tour once, decided by `tour_seen` and not by "the settings file did not exist" (a
user who changed the theme has a file and has still never seen it), and the flag is written when the
tour *starts* rather than when it finishes: a user who skips it in the first second has still seen it.
`UDPSCOPE_PROBE_HELPUI_MS` drives all of it -- the auto-start, the menu's seven rows and the
submenu's five, the toggle's effect read as a count of affordances on either side of it, and the tour
started, stepped forwards and back and dismissed -- and the exit dump gains `help layer:` and
`help figures:`, the latter being the ten surfaces' window-coordinate rectangles that the manual's
annotated screenshots crop their boxes from. Two of them are what the D-Bus-free headless run can
still not decide, and both are limitations rather than defects: export carries no "?" (it is a menu
action with no surface of its own, and a popover inside the menu's popover is the nested-popover trap
the invariants already warn about), and the tour card cannot miss its target when the target is the
whole content -- which is what the plot is at the window's 756 px minimum, where the split view
overlays the side panel instead of putting it beside the plot. The probe prints both rectangles
rather than asserting a placement, so that case reads as the geometry it is.
Also fixed while it was found: `gtk_widget_measure()` includes the widget's own margins (measured: a
280 px box with `margin-start 453` reports 733), so a measure that is used to *place* the widget is a
feedback loop -- that is what made the tour card walk between the corner and the target from frame to
frame.
