- 08-trigger.txt: names all four condition shapes and the buffer search; fixes the first
paragraph and 'How to reach it' to match what the panel actually contains (fix 3).
- 10-measurements.txt: adds a Statistics bullet — one observation per recompute, what
resets the history, what does not (fix 3).
- probe-readings.md: re-quotes condition-probe lines with level2= and mode= fields;
corrects leg-2 window geometry (0.2 s / 10 % pre, not 1.0 s / 50 %); moves the
wide-window reason to legs 1 and 3; fixes the search-probe scheduling note
(search_probe calls condition_probe directly; do not also set CONDITION_MS) (fix 6).
- verification.md: corrects shape-2 window geometry to match the code (fix 7).
- invariants-session-and-export.md, README.md: document the measure_stats session key —
position, type, default false (fix 8).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
period, frequency and pulse duration counted every sign change about a single
level, which is unusable on any real signal: the mid level is exactly where a
waveform moves fastest, so an interferer faster than the fundamental recrosses
it several times per true crossing. A 5 Hz sine with a 500 Hz tone at a tenth of
the amplitude read 79 crossings for 9, period=0.025622 against 0.2.
MeasureLevel gains a hysteresis band sized once in measure_set_level(): a tenth
of the window's peak-to-peak, clamped to half the room to the nearer extreme so
a threshold set near one stays usable. The band moves the edge decision only --
the sum/count split stays at the bare level, since that split is top/bottom and
has a documented exact reading. The bucket fast path tests the band and the
level separately rather than folding them, or it would refuse exactly the
buckets a crossing passes through: clean cost is unchanged at raw=0.1% and
1.41 ms a recompute.
tools/mock_udpstreamer.py gains --noise, defaulting to 0 so the exact probe
assertions still hold.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The SI prefix ladder in format_measure() was gated on a non-empty unit, so two
decimals of a small unitless value printed `0.00` -- the reading gone, not merely
coarse. That is a whole class of channels rather than a corner: a CONFIG need not
declare a unit, and a math channel never has one. Below 1e-12 the same loss
happened even with a unit, so that range falls back to three significant digits.
With no unit the prefix goes tight against the number (`585.24m`), since the space
exists to separate the number from its unit and a spaced `m` alone reads as metres.
The mock declared `unit="V"` for every data signal, which is why no probe could see
this; it now takes `--unit ''`.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
