docs: CLAUDE.md is a goal and a table of contents, so a context pays for what it reads

The file was 1967 lines and is auto-loaded into every context, so every
session paid for the whole of it to reach one invariant. It now carries the
project's goal, the three facts that are always relevant, and a table of
contents; the body is fourteen files under docs/claude/ reached by link
rather than by import, so nothing is loaded until it is asked for.

The content is moved verbatim -- the only edits are each file's own header
and the cross-references that became cross-file ("see the invariant below"
is now a link to the file that owns it).

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

docs/claude/invariants-time-axis-and-window.md

@@ -0,0 +1,77 @@
+# Invariants: the time axis and the window control
+
+What may change the time scale (one function, one caller), how the x labels pick their form, and what a fit restores.
+
+Part of [CLAUDE.md](../../CLAUDE.md). These are rules that cost a defect to learn; read the ones touching the area you are editing before you edit it.
+
+- **The window control's label is width-locked and ellipsized** (`kWindowLabelChars`), for
+  the same reason as the status label: it sits in the header bar above the plot, so a label
+  that grew from `1 s` to `123.456 ms` would widen the bar and relayout everything under it
+  on a mere change of window. That is also why the window is typed into a popover rather
+  than shown in the bar.
+- **No plot interaction changes the time scale; only the window control does.** The *time scale*
+  is more than the axis: `RowSet::window_s_` also feeds `ScopeModel::set_event_span()` (the
+  trigger's pre-trigger share is a share of *this* window), `ScopeModel::set_target_span()`
+  (which may re-plan the partition, move the decimation and **drop the history**), the window
+  control's readout and the session file. A **zoom or a pan** does not touch it by construction —
+  the controller writes the *member* axis and `clamp_to_data()` caps the span at `window_s_`, so
+  nothing has to be written to keep it that way. **Neither do the two fits**: a fit is the
+  *undo of a zoom*, so `RowSet::fit_x()` restores the window that is already set and reads
+  `window_s_` without ever writing it. Both fits used to frame the *data* instead and move
+  `window_s_` alone, which was wrong twice over — a gesture-triggered re-plan of the rings, and
+  an event span left on the *old* window until the next decade step or unit change applied the
+  fitted value for real (one action, two changes of time scale).
+- **`apply_time_window()` is the only place the time scale changes**, and the window control is
+  its only caller. It clamps to `window_limit()` and moves `set_target_span()`,
+  `set_event_span()`, `RowSet::set_time_window()`, the control and the session save together —
+  the partition **before** the axis, so the axis is framed over the rings that will exist. A fit
+  must not come here for two reasons: it is not entitled to the scale at all, and
+  `set_time_window()` unpins and re-arms the live follow, which would throw a held event or a
+  paused view onto a live edge it has nothing bound to. Paths that change the span for their own
+  reasons (an event pin) call `sync_window_display()` alone, which only restates the control and
+  never moves the plot — calling `apply_time_window()` there would clamp a legitimately short
+  capture up to the requested window.
+- **The x labels go relative on the tick *step against the label resolution at the axis'
+  magnitude*, never on the span.** `RowSet::update_time_labels()`'s question is only ever "can
+  this step be written at this magnitude": `TickFormat::Time` carries three significant figures
+  below a minute, **whole seconds** through `m:ss`/`h:mm:ss` up to a day, and three figures of
+  days above — so the resolution is a step function of the magnitude, which `time_label_resolution()`
+  states and nothing else may re-derive. The old test was `span < 1.0` and it was wrong in both
+  directions: a 2 s window at twenty minutes of uptime reads `20:00` on every tick and stayed
+  absolute, and a **triggered** sub-second window — whose axis is already `[-25ms, +25ms]` about
+  the edge — went relative and so re-anchored its ticks *away from the trigger*, with a `t0`
+  caption that had nothing to explain. Three details hold it up. The step is read back from the
+  majors the **last layout** produced, which is not a feedback loop (a tick's value depends on the
+  range and the axis' pixel width, never on the label form) but *is* absent before the first
+  layout — and with no ticks the form must be **left alone**, because a step guessed from the span
+  would be latched by the hysteresis below. The hysteresis is a 1.05 band on *leaving* the relative
+  form. And *entering* it needs a ULP of slack (`1 - 1e-9`): a step differenced from two tick
+  values and a resolution from `pow(10, n)` differ in their last bits when they are the same
+  number, and `step == res` is a readable axis (`1.73s`, `1.74s`, `1.75s` — one in the last digit
+  is exactly enough), so the bare comparison picked a different form from one frame to the next.
+  The guard is `[timelabels-probe]`'s `distinct=1`, which asserts what the form is *for* rather
+  than which form a given window gets.
+- **The `t0 = …` caption is chrome, never an annotation.** It is `Plot::set_x_note()` (added to
+  `deps/plotter` for this), drawn by `Renderer::draw_x_note()` on the legend's own
+  `draw_readout_panel()` backplate in the bottom-left corner of the axes, in **pixels**. It was an
+  `Annotation` first, and an annotation's anchor is a *data* coordinate: the caption therefore
+  crawled across the plot under a pan and drifted under a zoom, which is what "[t0=...s] move
+  slightly around when user zoom/pan" was. Three things follow. The **text is the host's**, because
+  the caption has to name the anchor precisely enough that label + caption is the exact absolute
+  time and `format_time()` would round it to three figures (`"t0 = %.6g s"`); only the **bottom
+  row** of the figure carries one, every other row being set to `""`; and the renderer measures it
+  rather than `Plot::layout()` — it reserves no space and nothing can be picked on it, so there is
+  no rect to read back, and a caption explaining the x labels must not be able to move the layout
+  those labels were measured into. The guards are the library's
+  `the_x_note_is_chrome_that_a_pan_or_a_zoom_does_not_move` (the footprint is the pixels a frame
+  with the caption differs from one without, and a pan plus a 64× zoom must give the same box to
+  the pixel) and `[timelabels-probe]`'s `note=`, which reads `Plot::x_note()` back.
+- **`fit_x()` restores the *whole of what the view may show*, which is not always `window_s_`.**
+  Live, that is the newest `window_s_` at the live edge (`set_time_window(window_s_)`, the same
+  path a resume takes). Pinned — a held event, a filling capture or a paused view — it is the
+  **pin's** full range, which is the snapshot's own stamps and may be legitimately *narrower*
+  than the requested window. It must write the per-row **member** axes as well as the link group:
+  `hold_pinned_window()` prefers a member that differs from `pinned_stated_`, which is how it
+  tells a real gesture from its own echo, so writing the group alone is reverted to the zoomed
+  range on the next frame. `fit_all()` is the y fit plus this, shared rather than duplicated so
+  the two cannot drift apart.