feat: a level band and a signal that stops can be the trigger's event too

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

src/condition.cpp

@@ -17,12 +17,23 @@ void EventDetector::reset() noexcept {
   in_pulse_ = false;
   pulse_up_ = false;
   pulse_start_s_ = 0.0;
+  inside_ = false;
+  last_cross_s_ = 0.0;
+  dropped_ = false;
 }
 
 double EventDetector::feed(double value, double t) noexcept {
   if (!have_prev_) {
     prev_ = value;
     have_prev_ = true;
+    // The window condition needs a side to change *from*, and the dropout a last-seen time
+    // to count from; neither can be derived from a crossing that has not happened. Seeding
+    // them here is what lets both handlers run without a "have we started" guard.
+    const double lo = cond_.level < cond_.level2 ? cond_.level : cond_.level2;
+    const double hi = cond_.level < cond_.level2 ? cond_.level2 : cond_.level;
+    inside_ = value >= lo && value <= hi;
+    last_cross_s_ = t;
+    dropped_ = false;
     return kNoEvent;
   }
   double event = kNoEvent;
@@ -34,8 +45,11 @@ double EventDetector::feed(double value, double t) noexcept {
       event = feed_pulse(value, t);
       break;
     case TriggerType::Window:
+      event = feed_window(value, t);
+      break;
     case TriggerType::Dropout:
-      break;  // implemented in the tasks that add their panel rows
+      event = feed_dropout(value, t);
+      break;
   }
   // After the handler: every crossing test above reads `prev_` as the previous sample.
   prev_ = value;
@@ -98,4 +112,39 @@ double EventDetector::feed_pulse(double value, double t) noexcept {
   return qualifies(width) ? t : kNoEvent;
 }
 
+double EventDetector::feed_window(double value, double t) noexcept {
+  const double lo = cond_.level < cond_.level2 ? cond_.level : cond_.level2;
+  const double hi = cond_.level < cond_.level2 ? cond_.level2 : cond_.level;
+  const bool inside = value >= lo && value <= hi;
+  if (inside == inside_) return kNoEvent;
+  inside_ = inside;
+  // The event is the *change of side*, so `Rising` reads as "into the band" and `Falling`
+  // as "out of it". A band of zero width therefore never fires at all, because no sample
+  // can be on a different side of it than its neighbour: the panel refuses one.
+  const bool fired = (cond_.edge == TriggerEdge::Rising && inside) ||
+                     (cond_.edge == TriggerEdge::Falling && !inside) ||
+                     cond_.edge == TriggerEdge::Both;
+  return fired ? t : kNoEvent;
+}
+
+double EventDetector::feed_dropout(double value, double t) noexcept {
+  const bool up = crossed_up(value);
+  const bool down = crossed_down(value);
+  const bool crossed = (cond_.edge == TriggerEdge::Rising && up) ||
+                       (cond_.edge == TriggerEdge::Falling && down) ||
+                       (cond_.edge == TriggerEdge::Both && (up || down));
+  if (crossed) {
+    last_cross_s_ = t;
+    dropped_ = false;
+    return kNoEvent;
+  }
+  // One event per silence, not one per sample of it: without the latch a dead signal would
+  // report an event on every sample after the timeout and fill the search's hit list with
+  // one answer repeated.
+  if (dropped_) return kNoEvent;
+  if (t - last_cross_s_ <= cond_.timeout_s) return kNoEvent;
+  dropped_ = true;
+  return t;
+}
+
 }  // namespace udpscope

src/condition.hpp

@@ -83,6 +83,8 @@ class EventDetector {
   }
   double feed_edge(double value, double t) noexcept;
   double feed_pulse(double value, double t) noexcept;
+  double feed_window(double value, double t) noexcept;
+  double feed_dropout(double value, double t) noexcept;
   /// Whether a measured width satisfies `cond_.cmp`. `Within`/`Outside` take their two
   /// bounds in either order, so a panel cannot make an empty band by typing the larger
   /// figure into the first spin.
@@ -94,6 +96,9 @@ class EventDetector {
   bool in_pulse_ = false;      ///< PulseWidth: an opening edge has been seen.
   bool pulse_up_ = false;      ///< PulseWidth: its polarity, so we know which edge closes it.
   double pulse_start_s_ = 0.0;
+  bool inside_ = false;        ///< Window: which side of the band the previous sample was.
+  double last_cross_s_ = 0.0;  ///< Dropout: when the signal was last seen crossing.
+  bool dropped_ = false;       ///< Dropout: the timeout has already been reported.
 };
 
 }  // namespace udpscope

src/ui.cpp

@@ -135,12 +135,16 @@ struct App {
   GtkWidget* trigger_cmp_drop = nullptr;
   GtkWidget* trigger_width_spin = nullptr;
   GtkWidget* trigger_width2_spin = nullptr;
+  GtkWidget* trigger_level2_spin = nullptr;
+  GtkWidget* trigger_timeout_spin = nullptr;
   /// The `labeled_box` rows a condition may not use: held so `sync_trigger_rows()` can
   /// hide them. A hidden row keeps its widget's value, so switching condition and back
   /// does not lose what was typed.
   GtkWidget* trigger_cmp_row = nullptr;
   GtkWidget* trigger_width_row = nullptr;
   GtkWidget* trigger_width2_row = nullptr;
+  GtkWidget* trigger_level2_row = nullptr;
+  GtkWidget* trigger_timeout_row = nullptr;
   GtkWidget* trigger_mode_drop = nullptr;
   GtkWidget* trigger_level_spin = nullptr;
   GtkWidget* trigger_pre_spin = nullptr;
@@ -1612,6 +1616,10 @@ TriggerType trigger_type_at(guint i) {
   switch (i) {
     case 1:
       return TriggerType::PulseWidth;
+    case 2:
+      return TriggerType::Window;
+    case 3:
+      return TriggerType::Dropout;
     default:
       return TriggerType::Edge;
   }
@@ -1646,6 +1654,8 @@ void publish_trigger_fields(App* app) {
   const guint cmp = gtk_drop_down_get_selected(GTK_DROP_DOWN(app->trigger_cmp_drop));
   const double width = gtk_spin_button_get_value(GTK_SPIN_BUTTON(app->trigger_width_spin));
   const double width2 = gtk_spin_button_get_value(GTK_SPIN_BUTTON(app->trigger_width2_spin));
+  const double level2 = gtk_spin_button_get_value(GTK_SPIN_BUTTON(app->trigger_level2_spin));
+  const double timeout = gtk_spin_button_get_value(GTK_SPIN_BUTTON(app->trigger_timeout_spin));
   {
     std::lock_guard<std::mutex> lock(app->model->mutex());
     TriggerConfig& tc = app->model->trigger();
@@ -1660,6 +1670,8 @@ void publish_trigger_fields(App* app) {
     tc.condition.cmp = width_cmp_at(cmp);
     tc.condition.width_s = width;
     tc.condition.width2_s = width2;
+    tc.condition.level2 = level2;
+    tc.condition.timeout_s = timeout;
   }
 }
 
@@ -1673,10 +1685,27 @@ void sync_trigger_rows(App& app) {
   const WidthCmp cmp =
       width_cmp_at(gtk_drop_down_get_selected(GTK_DROP_DOWN(app.trigger_cmp_drop)));
   const bool pulse = type == TriggerType::PulseWidth;
+  const bool window = type == TriggerType::Window;
   gtk_widget_set_visible(app.trigger_cmp_row, pulse);
   gtk_widget_set_visible(app.trigger_width_row, pulse);
   gtk_widget_set_visible(app.trigger_width2_row,
                          pulse && (cmp == WidthCmp::Within || cmp == WidthCmp::Outside));
+  gtk_widget_set_visible(app.trigger_level2_row, window);
+  gtk_widget_set_visible(app.trigger_timeout_row, type == TriggerType::Dropout);
+  // A band of zero width is not a degenerate edge trigger -- a window event is a change of
+  // *side*, so equal levels silently never fire, which looks exactly like a broken trigger.
+  // The panel is where that is refused: the second level is pushed at least one increment
+  // clear of the first, in whichever direction it already lay.
+  if (window) {
+    GtkSpinButton* l2 = GTK_SPIN_BUTTON(app.trigger_level2_spin);
+    const double level = gtk_spin_button_get_value(GTK_SPIN_BUTTON(app.trigger_level_spin));
+    double step = 0.0;
+    gtk_spin_button_get_increments(l2, &step, nullptr);
+    const double other = gtk_spin_button_get_value(l2);
+    if (std::fabs(other - level) < step) {
+      gtk_spin_button_set_value(l2, other < level ? level - step : level + step);
+    }
+  }
 }
 
 void on_trigger_field_changed(GtkWidget*, gpointer user) {
@@ -6614,7 +6643,7 @@ GtkWidget* build_trigger_panel(App& app) {
                    G_CALLBACK(on_trigger_signal_changed), &app);
   gtk_box_append(GTK_BOX(box), labeled_box("signal", app.trigger_signal_drop));
 
-  const char* types[] = {"edge", "pulse width", nullptr};
+  const char* types[] = {"edge", "pulse width", "window", "dropout", nullptr};
   app.trigger_type_drop = gtk_drop_down_new_from_strings(types);
   gtk_widget_set_tooltip_text(app.trigger_type_drop,
                               "what counts as an event: a level crossing, or a pulse whose "
@@ -6643,6 +6672,19 @@ GtkWidget* build_trigger_panel(App& app) {
   app.trigger_width2_row = labeled_box("and s", app.trigger_width2_spin);
   gtk_box_append(GTK_BOX(box), app.trigger_width2_row);
 
+  app.trigger_level2_spin = spin(-1.0e12, 1.0e12, 0.01, 4);
+  gtk_widget_set_tooltip_text(app.trigger_level2_spin,
+                              "the band's other edge; it is kept at least one increment away "
+                              "from the level, because a band of zero width can never be "
+                              "crossed");
+  app.trigger_level2_row = labeled_box("to level", app.trigger_level2_spin);
+  gtk_box_append(GTK_BOX(box), app.trigger_level2_row);
+
+  app.trigger_timeout_spin = spin(0.0, 3600.0, 0.001, 6);
+  gtk_spin_button_set_value(GTK_SPIN_BUTTON(app.trigger_timeout_spin), 0.001);
+  app.trigger_timeout_row = labeled_box("timeout s", app.trigger_timeout_spin);
+  gtk_box_append(GTK_BOX(box), app.trigger_timeout_row);
+
   app.trigger_level_spin = spin(-1.0e12, 1.0e12, 0.01, 4);
   g_signal_connect(app.trigger_level_spin, "value-changed", G_CALLBACK(+[](GtkWidget*, gpointer u) {
                      static_cast<App*>(u)->trigger_level_touched = true;
@@ -6674,7 +6716,8 @@ GtkWidget* build_trigger_panel(App& app) {
   gtk_box_append(GTK_BOX(box), live);
 
   for (GtkWidget* w : {app.trigger_level_spin, app.trigger_pre_spin, app.trigger_holdoff_spin,
-                       app.trigger_width_spin, app.trigger_width2_spin}) {
+                       app.trigger_width_spin, app.trigger_width2_spin,
+                       app.trigger_level2_spin, app.trigger_timeout_spin}) {
     g_signal_connect(w, "value-changed", G_CALLBACK(on_trigger_field_changed), &app);
   }
   g_signal_connect(app.trigger_edge_drop, "notify::selected",
@@ -6685,6 +6728,14 @@ GtkWidget* build_trigger_panel(App& app) {
                    G_CALLBACK(on_trigger_shape_changed), &app);
   g_signal_connect(app.trigger_cmp_drop, "notify::selected",
                    G_CALLBACK(on_trigger_shape_changed), &app);
+  // The clamp lives in `sync_trigger_rows()`, so the two level spins have to run it rather
+  // than the plain field publish.
+  for (GtkWidget* w : {app.trigger_level_spin, app.trigger_level2_spin}) {
+    g_signal_connect(w, "value-changed", G_CALLBACK(+[](GtkWidget*, gpointer u) {
+                       sync_trigger_rows(*static_cast<App*>(u));
+                     }),
+                     &app);
+  }
   sync_trigger_rows(app);
   return box;
 }
@@ -8401,28 +8452,39 @@ gboolean fields_probe(gpointer user) {
   return G_SOURCE_REMOVE;
 }
 
-/// Headless self-check for the qualified conditions: arms a pulse-width condition on the
+/// Headless self-check for the qualified conditions.  Selected by
-/// mock's `square`, whose narrow pulse the mock injects once per square period, and reports
+/// `UDPSCOPE_PROBE_CONDITION_SHAPE` (0 = pulse `<`, 1 = pulse `>`, 2 = window, 3 = dropout).
-/// the measured pulse width from the held event snapshot.
 ///
 /// The assertion is snapshot-relative rather than an absolute t0.  The app's stream clock
 /// epoch is the first packet it received, not the mock's t = 0; the two clocks differ by
 /// however many packets the CONNECT handshake cost (typically a whole number of 100-sample /
 /// 10 ms packets), so comparing trigger_time() against a mock-clock target is meaningless.
 ///
-/// A held event snapshot's stamps are edge-relative: stamps == 0 is the latching event,
+/// Shape 0 (pulse `<`): x = 0 is the glitch's closing edge. Scans backwards for the most
-/// which for a pulse-width condition is the pulse's *closing* edge.  The pulse's opening
+/// recent upward crossing; `measured = -stamp` is the glitch width (≈ 0.002 s).
-/// edge therefore sits at stamps ≈ -glitch_width.  The probe scans backwards from x = 0 to
-/// find the most recent upward crossing of level 0 (the same prev < level && value >= level
-/// test the detector uses) and negates the crossing's stamp to get the measured pulse width.
 ///
-/// A `measured` near 0.002 s means the condition caught the 2 ms glitch pulse exactly.
+/// Shape 1 (pulse `>`): same scan; `measured` is the ordinary square half-period (≈ 0.200 s).
-/// A `measured` near 0.200 s (the ordinary square half-period) means the condition fired on
+///
-/// an ordinary edge rather than the narrow pulse -- that is the wrong answer to distinguish
+/// Shape 2 (window): x = 0 is the moment the signal left the band. Reports `at0` (the
-/// against.  If no snapshot is available or no upward crossing is found before x = 0, the
+/// sample value at x = 0, which must be outside the band) and `earlier` (a sample a few
-/// line still prints with `measured=nan` rather than being skipped, so a failure is still
+/// stored periods back, which must be inside).
-/// one readable line.
+///
+/// Shape 3 (dropout): x = 0 is `quiet_at + timeout`, the moment the timeout expired. Scans
+/// backwards for the most recent level crossing; `measured = -stamp` should equal `timeout`.
+///
+/// All legs print one `[condition-probe]` line with `nan` for any unmeasurable field.
 struct ConditionProbe {
+  double glitch_at = 0.25;
+  double glitch_width = 0.002;
+  double square_period = 0.4;
+  /// With `--quiet-at`, the sine stops at a level on the other side of zero, so `quiet_at`
+  /// is its last crossing and the dropout's event time is exactly `quiet_at + timeout`.
+  /// Unlike the glitch this happens *once*, so the assertion is the absolute t0.
+  double quiet_at = -1.0;
+  double timeout = 0.050;
+  /// 0 = pulse width `<` (the glitch), 1 = pulse width `>`, 2 = window, 3 = dropout. Selected
+  /// by `UDPSCOPE_PROBE_CONDITION_SHAPE`; the default keeps Task 3's glitch leg.
+  int shape = 0;
   int waited = 0;
 };
 ConditionProbe g_condition;
@@ -8437,37 +8499,53 @@ gboolean condition_probe_report(gpointer user) {
     std::fflush(stderr);
     return G_SOURCE_REMOVE;
   }
-  // Measure the pulse width from the snapshot's own edge-relative stamps rather than
+  const double nan = std::numeric_limits<double>::quiet_NaN();
-  // comparing t0 against a mock-clock target.  stamps == 0 is the closing edge (the
-  // latching event for a pulse-width condition); the opening edge sits at stamps ≈ -width.
-  // Scan backwards from the last sample at or before x = 0 for the most recent upward
-  // crossing of the condition level, then negate the crossing stamp to get the width.
-  double measured = std::numeric_limits<double>::quiet_NaN();
   const double level = a->model->trigger().condition.level;
+  const double level2 = a->model->trigger().condition.level2;
   const std::size_t trig_ch = static_cast<std::size_t>(a->model->trigger().channel);
+
+  // Shape 2 reports two sample values rather than a measured width.
+  double at0 = nan;
+  double earlier = nan;
+  double measured = nan;
+
   if (std::shared_ptr<const EventSnapshot> snap = a->model->display_snapshot()) {
     if (snap != nullptr && trig_ch < snap->values.size()) {
       const std::vector<f64>& st = snap->stamps;
       const std::vector<f32>& vals = snap->values[trig_ch];
       if (vals.size() == st.size() && !st.empty()) {
-        // Find the last index whose stamp is <= 0.
+        // Index of the last stamp <= 0 (the latching event).
         const auto it = std::upper_bound(st.begin(), st.end(), 0.0);
-        std::size_t end = static_cast<std::size_t>(it - st.begin());
+        const std::size_t end = static_cast<std::size_t>(it - st.begin());
-        // Scan backwards for the most recent upward crossing (prev < level, value >= level).
+
-        for (std::size_t i = end; i >= 2; --i) {
+        if (g_condition.shape == 2) {
-          const double prev = static_cast<double>(vals[i - 2]);
+          // Window leg: x=0 is the moment the signal left the band.
-          const double val  = static_cast<double>(vals[i - 1]);
+          // `at0` is the sample at x=0 (must be outside [lo,hi]).
-          if (prev < level && val >= level) {
+          // `earlier` is a sample a few stored periods back (must be inside).
-            measured = -st[i - 1];
+          if (end >= 1) at0 = static_cast<double>(vals[end - 1]);
-            break;
+          // "A few stored periods" back: use half the snapshot length as a rough offset.
+          const std::size_t back = end > 4 ? end / 2 : 0;
+          if (back < vals.size()) earlier = static_cast<double>(vals[back]);
+        } else {
+          // Pulse and dropout legs: scan backwards for the most recent upward crossing
+          // (prev < level, value >= level) and negate the stamp to get a duration.
+          for (std::size_t i = end; i >= 2; --i) {
+            const double prev = static_cast<double>(vals[i - 2]);
+            const double val  = static_cast<double>(vals[i - 1]);
+            if (prev < level && val >= level) {
+              measured = -st[i - 1];
+              break;
+            }
           }
         }
       }
     }
   }
-  std::fprintf(stderr, "[condition-probe] type=%d cmp=%d width=%.6f t0=%.6f measured=%.6f mode=%d\n",
+  std::fprintf(stderr,
+               "[condition-probe] type=%d cmp=%d width=%.6f t0=%.6f measured=%.6f "
+               "at0=%.6f earlier=%.6f level2=%.6f mode=%d\n",
                int(a->model->trigger().condition.type), int(a->model->trigger().condition.cmp),
-               a->model->trigger().condition.width_s, t0, measured,
+               a->model->trigger().condition.width_s, t0, measured, at0, earlier, level2,
                int(a->model->display_mode()));
   std::fflush(stderr);
   return G_SOURCE_REMOVE;
@@ -8480,19 +8558,35 @@ gboolean condition_probe_arm(gpointer user) {
   apply_time_window(*a, 0.2);
   const std::vector<ChannelInfo>& channels = a->model->channels();
   int sel = -1;
+  const bool dropout = g_condition.shape == 3;
+  const char* want_name = dropout ? "sine" : "square";
   for (std::size_t i = 0; i < channels.size(); ++i) {
-    if (channels[i].name == "square") sel = static_cast<int>(i);
+    if (channels[i].name == want_name) sel = static_cast<int>(i);
   }
-  std::fprintf(stderr, "[condition-probe] square=%d of %zu channels\n", sel, channels.size());
+  std::fprintf(stderr, "[condition-probe] %s=%d of %zu channels\n", want_name, sel,
+               channels.size());
   if (sel >= 0) {
     gtk_drop_down_set_selected(GTK_DROP_DOWN(a->trigger_signal_drop),
                                static_cast<guint>(sel));
   }
-  gtk_drop_down_set_selected(GTK_DROP_DOWN(a->trigger_type_drop), 1);  // pulse width
+  // Shape 2 is `window`, which the dropdown numbers 2; the two pulse-width legs share type 1
-  gtk_drop_down_set_selected(GTK_DROP_DOWN(a->trigger_cmp_drop), 0);   // <
+  // and differ only in the comparison.
-  gtk_drop_down_set_selected(GTK_DROP_DOWN(a->trigger_edge_drop), 0);  // rising
+  const guint type = g_condition.shape == 2 ? 2u : (dropout ? 3u : 1u);
+  gtk_drop_down_set_selected(GTK_DROP_DOWN(a->trigger_type_drop), type);
+  gtk_drop_down_set_selected(GTK_DROP_DOWN(a->trigger_cmp_drop),
+                             g_condition.shape == 1 ? 1u : 0u);  // `>` for leg 1, `<` otherwise
+  // `both` for the window and the dropout: a band is entered *and* left, and a dropout has no
+  // direction at all. Rising for the two pulse-width legs, which open on a rising excursion.
+  gtk_drop_down_set_selected(GTK_DROP_DOWN(a->trigger_edge_drop),
+                             (dropout || g_condition.shape == 2) ? 2u : 0u);
   gtk_spin_button_set_value(GTK_SPIN_BUTTON(a->trigger_width_spin), 0.010);
-  gtk_spin_button_set_value(GTK_SPIN_BUTTON(a->trigger_level_spin), 0.0);
+  gtk_spin_button_set_value(GTK_SPIN_BUTTON(a->trigger_timeout_spin), g_condition.timeout);
+  // The band for the window leg: straddling zero, well inside the square's +/-1, so each
+  // transition both enters and leaves it. Harmless for the other legs, which ignore `level2`.
+  gtk_spin_button_set_value(GTK_SPIN_BUTTON(a->trigger_level2_spin), 0.5);
+  // Zero for every leg but the window, whose band is `[-0.5, +0.5]`.
+  gtk_spin_button_set_value(GTK_SPIN_BUTTON(a->trigger_level_spin),
+                            g_condition.shape == 2 ? -0.5 : 0.0);
   gtk_spin_button_set_value(GTK_SPIN_BUTTON(a->trigger_pre_spin), 10.0);
   gtk_spin_button_set_value(GTK_SPIN_BUTTON(a->trigger_holdoff_spin), 0.0);
   publish_trigger_fields(a);
@@ -8506,11 +8600,20 @@ gboolean condition_probe_arm(gpointer user) {
 gboolean condition_probe(gpointer user) {
   App* a = static_cast<App*>(user);
   if (a->window == nullptr) return G_SOURCE_REMOVE;
+  // `UDPSCOPE_PROBE_QUIET_AT` mirrors the mock's `--quiet-at`: it selects the dropout leg of
+  // the probe and tells it where the sine's last crossing is. Absent, the glitch leg runs.
+  if (const char* q = g_getenv("UDPSCOPE_PROBE_QUIET_AT")) g_condition.quiet_at = std::atof(q);
+  if (const char* s = g_getenv("UDPSCOPE_PROBE_CONDITION_SHAPE")) {
+    g_condition.shape = std::atoi(s);
+  } else if (g_condition.quiet_at >= 0.0) {
+    g_condition.shape = 3;
+  }
   // `square` is not acquired until it is enabled, and the trigger can only name a channel
   // that is: enabling is what starts acquisition.
+  const char* want = g_condition.shape == 3 ? "sine" : "square";
   const std::vector<SignalInfo>& signals = a->model->signals();
   for (std::size_t i = 0; i < signals.size(); ++i) {
-    if (signals[i].name == "square") a->model->set_signal_enabled(i, true);
+    if (signals[i].name == want) a->model->set_signal_enabled(i, true);
   }
   // One beat for the channel list to be rebuilt and the ring to refill behind the glitch.
   g_timeout_add(1500, condition_probe_arm, a);