# EGL powers the surfaceless headless context the GL tests assert pixels
# against. It is a *test-only* dependency: plot_core never links or includes it,
# so a machine without EGL can still build the library (-DPLOT_BUILD_TESTS=OFF).
# Prefer CMake's own module, fall back to pkg-config, and fail loudly if neither
# can supply EGL rather than silently dropping the GL tests.
find_package(EGL QUIET)
if(NOT EGL_FOUND)
  find_package(PkgConfig QUIET)
  if(PkgConfig_FOUND)
    pkg_check_modules(EGL_PC QUIET IMPORTED_TARGET egl)
  endif()
endif()

if(TARGET EGL::EGL)
  set(plot_egl_library EGL::EGL)
elseif(TARGET PkgConfig::EGL_PC)
  set(plot_egl_library PkgConfig::EGL_PC)
else()
  message(FATAL_ERROR
    "plot: PLOT_BUILD_TESTS=ON requires EGL (EGL/egl.h plus libEGL) for the headless "
    "OpenGL context used by the GL tests. Install it (e.g. libegl-dev, libegl1-mesa-dev "
    "or mesa-libEGL-devel) or configure with -DPLOT_BUILD_TESTS=OFF.")
endif()

find_package(Threads REQUIRED)   # std::thread in the push/read race test

add_executable(plot_tests
  main.cpp
  test_transform.cpp
  test_gl_context.cpp
  test_primitives.cpp
  test_ring_buffer.cpp
  test_minmax_pyramid.cpp
  test_series.cpp
  test_ticks.cpp
  test_measure.cpp
  test_plot.cpp
  test_figure.cpp
  test_render_smoke.cpp
  test_controller.cpp
  egl_headless.cpp
)
target_link_libraries(plot_tests PRIVATE plot::core ${plot_egl_library} Threads::Threads)

# The Dear ImGui widget is the one adapter with a test here: its input translation
# (edge synthesis, the hover gate, drag capture, wheel containment) is logic this
# project owns, not a toolkit's. The suite is otherwise ImGui-free, so the source
# and the link are added only when the adapter exists -- which the top-level
# CMakeLists.txt guarantees by adding the adapters before this directory.
if(TARGET plot::imgui)
  target_sources(plot_tests PRIVATE test_imgui_widget.cpp)
  target_link_libraries(plot_tests PRIVATE plot::imgui imgui)
endif()

# The GLFW host's figure-mode routing -- which row's controller a pointer pixel reaches --
# is this project's logic too, and it needs no window: the cases drive `controller_at()`
# against the rects `Figure::layout()` computes. Guarded on the adapter's target for the
# same reason as the ImGui block above.
if(TARGET plot::glfw)
  target_sources(plot_tests PRIVATE test_glfw_host.cpp)
  target_link_libraries(plot_tests PRIVATE plot::glfw)
endif()

# The Qt adapter's pointer anchor is deliberately toolkit-free (see
# adapters/qt6/qt_pointer.hpp), so this one piece of that adapter's translation is
# tested without linking Qt -- and without `PLOT_BUILD_QT6`, since no Qt target has
# to exist for it to compile.
target_sources(plot_tests PRIVATE test_qt_pointer.cpp)

# Same for the GTK adapter's input translation (see adapters/gtk4/gtk_input.hpp):
# the device-pixel mapping it derives from GTK's two sizes, the pixel space its drag
# anchor is kept in, the wheel's unit and sign and the modifier mask are this
# project's logic, and a headless X server at an integer scale can exercise only
# part of it.
target_sources(plot_tests PRIVATE test_gtk_input.cpp)
target_include_directories(plot_tests PRIVATE "${CMAKE_SOURCE_DIR}/adapters")

# The optional runtime-font backend brings its own cases, and they exist only when
# its target does: the header, the class and the archive are all absent otherwise,
# so there would be nothing to compile them against (see PLOT_BUILD_TTF_FONT in the
# top-level CMakeLists.txt). Guarded on the target rather than on the option, like
# the adapter cases above, so a target that exists for any reason gets its cases.
#
# Two paths are handed over as definitions because a case needs them and should
# not guess: the core archive the "no stb_truetype in plot_core" case inspects
# (a generator expression, so it is this build's own archive) and the cmake the
# umbrella check is re-run with.
if(TARGET plot::font_ttf)
  target_sources(plot_tests PRIVATE test_true_type_font.cpp)
  target_link_libraries(plot_tests PRIVATE plot::font_ttf)
  target_compile_definitions(plot_tests PRIVATE
    PLOT_CORE_ARCHIVE="$<TARGET_FILE:plot_core>"
    PLOT_CMAKE_COMMAND="${CMAKE_COMMAND}")
  # The cases compare a bake against the rasteriser's own glyph bitmaps, which is
  # the only reference that can tell a complete cell from a clipped one, and for
  # that the test needs the vendored header's *declarations* (its implementation is
  # already in the binary through plot::font_ttf). This is the optional target's
  # own test, compiled only when that target exists, and it is the one target
  # outside src/text that sees third_party/: the isolation this project promises --
  # plot_core's archive and every public header under include/plot/ -- is what
  # plot_core_stays_free_of_stb_truetype keeps asserting, and it is unaffected by
  # which include paths a test binary has.
  target_include_directories(plot_tests PRIVATE "${CMAKE_SOURCE_DIR}/third_party")
endif()

# Same switches the library is built with: the cost tests read the counters
# behind them (see include/plot/data/detail/{cover,merge}_count.hpp).
target_compile_definitions(plot_tests PRIVATE PLOT_PYRAMID_COUNT_COVERS
                                             PLOT_PYRAMID_COUNT_MERGES
                                             PLOT_RING_STATS
                                             PLOT_COUNT_MEASURE_RECOMPUTES
                                             # The committed source root, so the
                                             # atlas-generator case can run
                                             # tools/fonts/gen_atlas.py --check
                                             # against the committed atlas.
                                             PLOT_SOURCE_DIR="${CMAKE_SOURCE_DIR}")
plot_apply_warnings(plot_tests)

add_test(NAME plot_tests COMMAND plot_tests)

# The GL tests create a real EGL context, and llvmpipe's teardown leaks driver
# allocations that are not this library's. The suppressions file names those
# libraries and nothing else (see cmake/plot_asan_suppressions.txt); a report from
# anything under include/plot/ or src/ is still an error. The environment is set
# on the test rather than in a preset so `ctest --test-dir build/asan` gets it
# however it is launched, and print_suppressions makes the counts visible -- a run
# must show what it suppressed, not hide it.
if(PLOT_ASAN_ENABLED)
  set_tests_properties(plot_tests PROPERTIES ENVIRONMENT
    "ASAN_OPTIONS=detect_leaks=1:print_suppressions=1:suppressions=${CMAKE_SOURCE_DIR}/cmake/plot_asan_suppressions.txt")
endif()

# --- public headers: standalone compilation and umbrella coverage -------------
#
# The plan's Global Constraints require every header under include/plot/ to
# compile standalone, and include/plot/plot.hpp to include every public one
# (never an adapter). Both were verified by hand and nothing kept them true, so
# a header added later could break either silently. These targets make the build
# enforce both and the ctest entries below make the suite fail when the checks
# do. The header list is globbed at configure time (CONFIGURE_DEPENDS, so adding
# or removing a header re-globs) -- a hand-kept list would defeat the point.
file(GLOB_RECURSE plot_public_headers CONFIGURE_DEPENDS
  RELATIVE "${CMAKE_SOURCE_DIR}/include"
  "${CMAKE_SOURCE_DIR}/include/plot/*.hpp")
list(SORT plot_public_headers)

# One generated TU per header, each holding only that header's #include. An
# OBJECT library: this is a compile check, with no link step, so any header that
# needs something it does not itself include fails the build here.
set(plot_header_check_sources "")
foreach(plot_header IN LISTS plot_public_headers)
  string(MAKE_C_IDENTIFIER "${plot_header}" plot_header_slug)
  set(plot_header_check_source "${CMAKE_CURRENT_BINARY_DIR}/header_checks/${plot_header_slug}.cpp")
  set(plot_header_check_content
    "// Generated by tests/CMakeLists.txt: <${plot_header}> must compile on its own.\n#include <${plot_header}>\n")
  file(GENERATE OUTPUT "${plot_header_check_source}" CONTENT "${plot_header_check_content}")
  list(APPEND plot_header_check_sources "${plot_header_check_source}")
endforeach()

add_library(plot_header_self_containment OBJECT ${plot_header_check_sources})
target_link_libraries(plot_header_self_containment PRIVATE plot::core)
plot_apply_warnings(plot_header_self_containment)

# The umbrella on its own: the generated TU includes only <plot/plot.hpp> and
# constructs one of each layer's entry type, so an umbrella that misses a header
# -- or that is unusable without further includes -- fails to build. The test
# runs the linked binary, so a build that produced nothing usable still fails.
set(plot_umbrella_check_source "${CMAKE_CURRENT_BINARY_DIR}/umbrella_check.cpp")
file(GENERATE OUTPUT "${plot_umbrella_check_source}" CONTENT
"// Generated by tests/CMakeLists.txt: the umbrella must be usable by itself.
#include <plot/plot.hpp>

int main() {
  plot::Plot plot;
  plot::Figure figure(2);
  plot::Renderer renderer;
  plot::data::StreamSeries series(16, 0.0, 1.0);
  plot::input::Controller controller(plot);
  (void)figure;
  (void)renderer;
  (void)series;
  (void)controller;
  return 0;
}
")
add_executable(plot_umbrella_check "${plot_umbrella_check_source}")
target_link_libraries(plot_umbrella_check PRIVATE plot::core)
plot_apply_warnings(plot_umbrella_check)

# Coverage check on the umbrella. Included here so a public header missing from
# plot.hpp stops the configure; the ctest entry below runs the same script again
# so the check is also a visible test.
set(PLOT_INCLUDE_DIR "${CMAKE_SOURCE_DIR}/include")
set(PLOT_UMBRELLA "${CMAKE_SOURCE_DIR}/include/plot/plot.hpp")
include("${CMAKE_SOURCE_DIR}/cmake/plot_umbrella_check.cmake")

add_test(NAME plot_headers_self_contained
  COMMAND ${CMAKE_COMMAND} --build "${CMAKE_BINARY_DIR}" --target plot_header_self_containment)
add_test(NAME plot_umbrella_covers_public_headers
  COMMAND ${CMAKE_COMMAND}
          -DPLOT_INCLUDE_DIR=${CMAKE_SOURCE_DIR}/include
          -DPLOT_UMBRELLA=${CMAKE_SOURCE_DIR}/include/plot/plot.hpp
          -P "${CMAKE_SOURCE_DIR}/cmake/plot_umbrella_check.cmake")
add_test(NAME plot_umbrella_check COMMAND plot_umbrella_check)