#include "harness.hpp"
#include <plot/plot/plot.hpp>
#include <plot/plot/detail/measure_count.hpp>
#include <plot/data/array_series.hpp>
#include <plot/data/stream_series.hpp>
#include <plot/render/embedded_mono_font.hpp>
#include <cmath>
#include <limits>
#include <vector>

namespace {

std::vector<f32> ramp(u64 n) {
  std::vector<f32> y(n);
  for (u64 i = 0; i < n; ++i) y[i] = f32(i);
  return y;
}

f32 widest_major_label(const plot::Axis& a, const plot::render::TextBackend& t) {
  f32 w = 0.0f;
  for (const plot::Tick& tick : a.ticks) {
    if (!tick.major) continue;
    const f32 m = t.measure(tick.label.c_str());
    if (m > w) w = m;
  }
  return w;
}

/// Every major tick's value, in order: what a tick-density assertion compares, so it
/// can compare the *grid* the two scales produce rather than only a count.
std::vector<f64> major_tick_values(const plot::Axis& a) {
  std::vector<f64> v;
  for (const plot::Tick& tick : a.ticks) {
    if (tick.major) v.push_back(tick.value);
  }
  return v;
}

/// A log axis must never be left inverted or non-positive by an auto-fit.
void check_log_axis_range(const plot::Range& r) {
  PLOT_CHECK(std::isfinite(r.min) && std::isfinite(r.max));
  PLOT_CHECK(r.min > 0.0);
  PLOT_CHECK(r.min < r.max);
}

bool has_vertical(const plot::Grid& g, f64 x, bool major) {
  for (const plot::GridLine& l : g.lines()) {
    if (l.x0 == l.x1 && l.x0 == x && l.major == major) return true;
  }
  return false;
}

bool has_horizontal(const plot::Grid& g, f64 y, bool major) {
  for (const plot::GridLine& l : g.lines()) {
    if (l.y0 == l.y1 && l.y0 == y && l.major == major) return true;
  }
  return false;
}

/// The same question in *screen* space: the renderer places a line by mapping its
/// `x0`/`y0` through the axis' transform, so this is the coincidence the pixels show.
bool has_vertical_screen(const plot::Grid& g, const plot::Transform& tx, f64 sx, bool major) {
  for (const plot::GridLine& l : g.lines()) {
    if (l.x0 == l.x1 && l.major == major && tx.to_screen_x(l.x0) == sx) return true;
  }
  return false;
}

bool has_horizontal_screen(const plot::Grid& g, const plot::Transform& ty, f64 sy, bool major) {
  for (const plot::GridLine& l : g.lines()) {
    if (l.y0 == l.y1 && l.major == major && ty.to_screen_y(l.y0) == sy) return true;
  }
  return false;
}

/// How many of `g`'s lines carry one class: `vertical` picks the direction, `major`
/// the class.
u32 count_lines(const plot::Grid& g, bool vertical, bool major) {
  u32 n = 0;
  for (const plot::GridLine& l : g.lines()) {
    if (((l.x0 == l.x1) == vertical) && l.major == major) ++n;
  }
  return n;
}

/// Whether `ticks` holds `value` -- the "and every tick has a line" half of the
/// coincidence check, asked of the list the grid was built from.
bool tick_at(const std::vector<plot::Tick>& ticks, f64 value) {
  for (const plot::Tick& t : ticks) {
    if (t.value == value) return true;
  }
  return false;
}

}  // namespace

PLOT_TEST(layout_without_text_backend_uses_default_label_areas) {
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  p.add_y_axis({"v", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
  const plot::PlotLayout& l = p.layout();
  PLOT_CHECK_NEAR(l.y_axis_width, 56.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_axis_height, 22.0f, 1e-6);
  PLOT_CHECK_NEAR(l.axes.x, 56.0f, 1e-6);
  PLOT_CHECK_NEAR(l.axes.w, 744.0f, 1e-6);
  PLOT_CHECK_NEAR(l.axes.h, 378.0f, 1e-6);
  PLOT_CHECK_NEAR(l.y_label_area.x, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.y_label_area.w, 56.0f, 1e-6);
  PLOT_CHECK_NEAR(l.y_label_area.h, 378.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_label_area.y, 378.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_label_area.w, 744.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_label_area.h, 22.0f, 1e-6);
  // "v" is a title, but no backend can measure it, so nothing is reserved: the
  // defaults above are what a plot without a text backend keeps laying out with.
  PLOT_CHECK_NEAR(l.y_title_width, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_title_height, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.y_title_area.w, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_title_area.h, 0.0f, 1e-6);
}

PLOT_TEST(layout_derives_label_areas_from_font_metrics) {
  plot::render::EmbeddedMonoFont font;
  plot::Plot p;
  p.set_text_backend(&font);
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ay = p.add_y_axis({"volts", {-1000.0, 1000.0}, false, plot::AxisPlace::Left, false});
  const plot::PlotLayout& l = p.layout();
  const f32 pad = p.style().grid_label_pad;
  PLOT_CHECK_NEAR(l.y_axis_width, widest_major_label(p.y_axis(ay), font) + 2.0f * pad, 1e-4);
  PLOT_CHECK_NEAR(l.x_axis_height, font.height() + 2.0f * pad, 1e-4);
  // The y axis carries the title "volts", drawn rotated to read bottom-to-top, so
  // the strip left of the label strip is one text line *wide* -- the column the
  // run advances up -- and not as wide as the title is when horizontal. There is
  // no x axis, so the x direction reserves nothing beyond its label strip.
  PLOT_CHECK_NEAR(l.y_title_width, font.height() + 2.0f * pad, 1e-4);
  PLOT_CHECK(l.y_title_width < font.measure("volts") + 2.0f * pad);
  PLOT_CHECK_NEAR(l.x_title_height, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.axes.x, l.y_title_width + l.y_axis_width, 1e-4);
  PLOT_CHECK_NEAR(l.axes.w, 800.0f - (l.y_title_width + l.y_axis_width), 1e-4);
  PLOT_CHECK_NEAR(l.axes.h, 400.0f - (l.x_axis_height + l.x_title_height), 1e-4);
  // The strips tile the viewport outside `axes`: title, then labels, then data.
  PLOT_CHECK_NEAR(l.y_title_area.x, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.y_title_area.right(), l.y_label_area.x, 1e-4);
  PLOT_CHECK_NEAR(l.y_label_area.right(), l.axes.x, 1e-4);
  PLOT_CHECK_NEAR(l.x_title_area.y, l.x_label_area.bottom(), 1e-4);
  PLOT_CHECK_NEAR(l.x_title_area.bottom(), l.axes.bottom() + l.x_label_area.h + l.x_title_height,
                  1e-4);
  PLOT_CHECK_NEAR(l.x_label_area.y, l.axes.bottom(), 1e-4);
}

/// Every titled axis of a direction gets its own text line inside its strip; without
/// that, the second titled axis of an edge is drawn on top of the first. An x line is
/// a row of the strip, a y one a column of it, because the y title is drawn rotated.
PLOT_TEST(layout_stacks_one_title_line_per_titled_axis) {
  plot::render::EmbeddedMonoFont font;
  plot::Plot p;
  p.set_text_backend(&font);
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const f32 pad = p.style().grid_label_pad;
  p.add_x_axis({"seconds", {0.0, 1.0}, false, plot::AxisPlace::Bottom, false});
  p.add_x_axis({"samples", {0.0, 1.0}, false, plot::AxisPlace::Top, false});
  p.add_y_axis({"volts", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
  p.add_y_axis({"amps", {-1.0, 1.0}, false, plot::AxisPlace::Right, false});
  const plot::PlotLayout& l = p.layout();
  PLOT_CHECK(p.titled_x_axis_count() == 2u);
  PLOT_CHECK(p.titled_y_axis_count() == 2u);
  // The x titles stack in rows, so the strip grows by a line per titled axis...
  PLOT_CHECK_NEAR(l.x_title_height, 2.0f * font.height() + 2.0f * pad, 1e-4);
  // ... and the y titles, rotated, take a *column* each: the second titled y axis
  // costs another text line of width rather than a row of the strip's height, and
  // the pair still cannot be drawn over each other. The widest title's own width
  // plays no part in it.
  PLOT_CHECK_NEAR(l.y_title_width, 2.0f * font.height() + 2.0f * pad, 1e-4);
  PLOT_CHECK(l.y_title_width <
             std::max(font.measure("volts"), font.measure("amps")) + 2.0f * pad);
  PLOT_CHECK_NEAR(l.axes.h, 400.0f - (l.x_axis_height + l.x_title_height), 1e-4);
}

/// An axis with no title reserves nothing: the strips exist so that a titled axis
/// has somewhere outside `axes` to draw in, not as a fixed cost per plot.
PLOT_TEST(layout_reserves_no_title_strip_without_a_title) {
  plot::render::EmbeddedMonoFont font;
  plot::Plot p;
  p.set_text_backend(&font);
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  p.add_x_axis({"", {0.0, 1.0}, false, plot::AxisPlace::Bottom, false});
  p.add_y_axis({"", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
  const plot::PlotLayout& l = p.layout();
  PLOT_CHECK_NEAR(l.y_title_width, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_title_height, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.y_title_area.w, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_title_area.h, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.y_label_area.x, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.axes.x, l.y_axis_width, 1e-4);
  PLOT_CHECK_NEAR(l.axes.h, 400.0f - l.x_axis_height, 1e-4);
}

/// The y title is rotated, so its strip is a column: one text line wide where a
/// horizontal run needed the title's own width, and as tall as the axes, which is
/// where the run spends its length. The title here is wide enough to make the two
/// models plainly different -- it measures more than ten of the lines it now costs.
PLOT_TEST(y_title_strip_is_narrow_when_a_y_title_is_set) {
  plot::render::EmbeddedMonoFont font;
  plot::Plot p;
  p.set_text_backend(&font);
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  p.add_x_axis({"seconds", {0.0, 1.0}, false, plot::AxisPlace::Bottom, false});
  p.add_y_axis({"millivolts per division", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
  const plot::PlotLayout& l = p.layout();
  const plot::f32 pad = p.style().grid_label_pad;

  // One text line wide -- a column, not the run's own width...
  PLOT_CHECK_NEAR(l.y_title_area.w, l.y_title_width, 1e-6);
  PLOT_CHECK_NEAR(l.y_title_width, font.height() + 2.0f * pad, 1e-4);
  PLOT_CHECK(l.y_title_width < font.measure("millivolts per division") + 2.0f * pad);
  // ... spanning the axes' whole vertical extent, so the run has the room to
  // advance in and a title longer than the axes is cut where the axes ends.
  PLOT_CHECK_NEAR(l.y_title_area.x, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.y_title_area.y, l.axes.y, 1e-6);
  PLOT_CHECK_NEAR(l.y_title_area.h, l.axes.h, 1e-4);
  PLOT_CHECK(l.y_title_area.h > l.y_title_area.w);
  // The strips tile the viewport outside `axes`: title, then labels, then data.
  PLOT_CHECK_NEAR(l.y_title_area.right(), l.y_label_area.x, 1e-4);
  PLOT_CHECK_NEAR(l.y_label_area.right(), l.axes.x, 1e-4);
  PLOT_CHECK_NEAR(l.axes.x, l.y_title_width + l.y_axis_width, 1e-4);
  PLOT_CHECK_NEAR(l.axes.w, 800.0f - (l.y_title_width + l.y_axis_width), 1e-4);
}

/// A Left and a Right titled y axis both draw in the one strip the layout reserves,
/// so the strip has to hold two runs. They no longer stack down its height -- the
/// runs are vertical, they would overlap from top to bottom -- so each gets a
/// column, and the strip is two text lines wide. What the model must not do is go
/// back to being as wide as the widest title: the columns are lines, not titles.
PLOT_TEST(two_titled_y_axes_reserve_a_column_each) {
  plot::render::EmbeddedMonoFont font;
  plot::Plot p;
  p.set_text_backend(&font);
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  p.add_y_axis({"volts", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
  p.add_y_axis({"amps", {-1.0, 1.0}, false, plot::AxisPlace::Right, false});
  const plot::PlotLayout& l = p.layout();
  const plot::f32 pad = p.style().grid_label_pad;

  PLOT_CHECK(p.titled_y_axis_count() == 2u);
  PLOT_CHECK_NEAR(l.y_title_width, 2.0f * font.height() + 2.0f * pad, 1e-4);
  // Two columns fit side by side inside the strip, and the axes is inset by it once.
  PLOT_CHECK(l.y_title_width >= 2.0f * font.height());
  PLOT_CHECK_NEAR(l.y_title_area.w, l.y_title_width, 1e-6);
  PLOT_CHECK_NEAR(l.y_title_area.right(), l.y_label_area.x, 1e-4);
  PLOT_CHECK_NEAR(l.axes.x, l.y_title_width + l.y_axis_width, 1e-4);
}

PLOT_TEST(time_axis_tick_labels_use_format_time) {
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis(
      {"t", {0.0, 120.0}, false, plot::AxisPlace::Bottom, false, plot::TickFormat::Time});
  (void)p.layout();
  const std::vector<plot::Tick>& ticks = p.x_axis(ax).ticks;
  PLOT_CHECK(!ticks.empty());
  bool saw_minute_label = false;
  for (const plot::Tick& tick : ticks) {
    if (!tick.major) continue;
    PLOT_CHECK(!tick.label.empty());
    if (tick.value == 60.0) {
      PLOT_CHECK(tick.label == "1:00");   // format_time, not format_si
      saw_minute_label = true;
    }
  }
  PLOT_CHECK(saw_minute_label);
}

PLOT_TEST(x_transform_maps_range_onto_axes_rect) {
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {100.0, 200.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {-2.0, 2.0}, false, plot::AxisPlace::Left, false});
  const plot::Rect a = p.layout().axes;
  const plot::Transform tx = p.x_transform(ax);
  const plot::Transform ty = p.y_transform(ay);
  PLOT_CHECK_NEAR(tx.to_screen_x(100.0), a.x, 1e-9);
  PLOT_CHECK_NEAR(tx.to_screen_x(200.0), a.right(), 1e-9);
  PLOT_CHECK_NEAR(ty.to_screen_y(-2.0), a.bottom(), 1e-9);   // range min sits at the bottom
  PLOT_CHECK_NEAR(ty.to_screen_y(2.0), a.y, 1e-9);           // range max sits at the top
  PLOT_CHECK_NEAR(tx.to_data_x(tx.to_screen_x(137.0)), 137.0, 1e-9);
  PLOT_CHECK_NEAR(ty.to_data_y(ty.to_screen_y(0.5)), 0.5, 1e-9);
  // An axis index that does not exist must not crash and must stay invertible.
  PLOT_CHECK_NEAR(p.x_transform(9).to_data_x(p.x_transform(9).to_screen_x(0.25)), 0.25, 1e-9);
  PLOT_CHECK_NEAR(p.y_transform(9).to_data_y(p.y_transform(9).to_screen_y(0.25)), 0.25, 1e-9);
}

PLOT_TEST(auto_fit_uses_trace_bounds_with_margin) {
  std::vector<f32> y = {0.0f, 1.0f, 2.0f, 3.0f};
  plot::data::ArraySeries s(std::move(y), 0.0, 1.0);
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 1000.0}, true, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 1000.0}, true, plot::AxisPlace::Left, false});
  p.add_trace({&s, plot::Color::hex(0x40C0FF), 1.5f, ax, ay});
  p.auto_fit_x();
  p.auto_fit_y(ay);
  const plot::Range xr = p.x_range(ax);
  const plot::Range yr = p.y_range(ay);
  PLOT_CHECK_NEAR(xr.min, 0.0 - 3.0 * 0.02, 1e-12);   // 4 samples span x 0..3, 2% margin
  PLOT_CHECK_NEAR(xr.max, 3.0 + 3.0 * 0.02, 1e-12);
  PLOT_CHECK_NEAR(yr.min, 0.0 - 3.0 * 0.02, 1e-12);
  PLOT_CHECK_NEAR(yr.max, 3.0 + 3.0 * 0.02, 1e-12);

  // An explicit range pins the axis; a later fit re-enables auto scaling.
  p.set_y_range(ay, {0.0, 1.0});
  PLOT_CHECK(!p.y_axis(ay).auto_scale);
  p.auto_fit_y(ay);
  PLOT_CHECK(p.y_axis(ay).auto_scale);
  PLOT_CHECK_NEAR(p.y_range(ay).max, 3.0 + 3.0 * 0.02, 1e-12);
  // auto_scale = false survives layout(): the pinned range is not snapped back.
  p.set_y_range(ay, {0.0, 1.0});
  (void)p.layout();
  PLOT_CHECK_NEAR(p.y_range(ay).max, 1.0, 1e-12);
}

PLOT_TEST(layout_refits_axes_left_on_auto_scale) {
  std::vector<f32> y = {0.0f, 1.0f, 2.0f, 3.0f};
  plot::data::ArraySeries s(std::move(y), 0.0, 1.0);
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 1000.0}, true, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 1000.0}, true, plot::AxisPlace::Left, false});
  p.add_trace({&s, plot::Color::hex(0x40C0FF), 1.5f, ax, ay});
  (void)p.layout();                             // no explicit fit needed
  PLOT_CHECK_NEAR(p.x_range(ax).max, 3.0 + 3.0 * 0.02, 1e-12);
  PLOT_CHECK_NEAR(p.y_range(ay).max, 3.0 + 3.0 * 0.02, 1e-12);
  // An explicit range wins from then on: layout() must not snap it back.
  p.set_x_range(ax, {0.0, 1.0});
  p.set_y_range(ay, {0.0, 2.0});
  (void)p.layout();
  PLOT_CHECK_NEAR(p.x_range(ax).max, 1.0, 1e-12);
  PLOT_CHECK_NEAR(p.y_range(ay).max, 2.0, 1e-12);
}

PLOT_TEST(auto_fit_handles_degenerate_and_null_series) {
  std::vector<f32> one{5.0f};
  plot::data::ArraySeries s(std::move(one), 0.0, 1.0);
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 1.0}, true, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 1.0}, true, plot::AxisPlace::Left, false});
  p.add_trace({nullptr, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});   // skipped, not a crash
  PLOT_CHECK(p.add_trace({&s, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay}) == 1u);
  PLOT_CHECK(p.trace_count() == 2u);

  p.auto_fit_x();
  p.auto_fit_y(ay);
  const plot::Range xr = p.x_range(ax);
  const plot::Range yr = p.y_range(ay);
  PLOT_CHECK(xr.span() > 0.0);                    // degenerate {0,0} widened
  PLOT_CHECK(xr.min < 0.0 && xr.max > 0.0);
  PLOT_CHECK(yr.span() > 0.0);                    // degenerate {5,5} widened
  PLOT_CHECK(yr.min < 5.0 && yr.max > 5.0);
  (void)p.layout();                              // must survive the null trace
}

PLOT_TEST(measurement_matches_direct_computation_and_tracks_cursor_moves) {
  plot::data::ArraySeries s(ramp(100), 0.0, 1.0);
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 99.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 99.0}, false, plot::AxisPlace::Left, false});
  p.add_trace({&s, plot::Color::hex(0x40C0FF), 1.5f, ax, ay});
  const u32 a = p.add_cursor(10.0, plot::Color::hex(0xFFB020));
  const u32 b = p.add_cursor(19.0, plot::Color::hex(0xFFB020));
  const u32 m = p.add_measure(a, b);
  const plot::Measurement& r = p.measurement(m);
  PLOT_CHECK(r.valid);
  double sum = 0.0, sq = 0.0;
  for (u64 i = 10; i <= 19; ++i) {
    sum += double(i);
    sq += double(i) * double(i);
  }
  PLOT_CHECK_NEAR(r.mean, sum / 10.0, 1e-9);
  PLOT_CHECK_NEAR(r.rms, std::sqrt(sq / 10.0), 1e-9);
  PLOT_CHECK_NEAR(r.integral, sum, 1e-9);         // dx == 1
  PLOT_CHECK_NEAR(r.ymin, 10.0, 1e-9);
  PLOT_CHECK_NEAR(r.ymax, 19.0, 1e-9);
  PLOT_CHECK_NEAR(r.dx, 9.0, 1e-9);
  PLOT_CHECK_NEAR(r.dy, 9.0, 1e-9);
  PLOT_CHECK_NEAR(r.slope, 1.0, 1e-9);

  // Moving a cursor the measure depends on must invalidate the cached result.
  p.set_cursor_x(b, 14.0);
  const plot::Measurement& r2 = p.measurement(m);
  PLOT_CHECK(r2.valid);
  PLOT_CHECK_NEAR(r2.ymax, 14.0, 1e-9);
  PLOT_CHECK_NEAR(r2.dx, 4.0, 1e-9);
}

PLOT_TEST(measurement_recomputes_when_the_series_grows) {
  plot::data::StreamSeries s(1024, 0.0, 1.0);
  for (u64 i = 0; i < 10; ++i) s.push(f32(i));
  s.acquire();
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 39.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 39.0}, false, plot::AxisPlace::Left, false});
  p.add_trace({&s, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});
  const u32 a = p.add_cursor(2.0, plot::Color::hex(0xFFB020));
  const u32 b = p.add_cursor(20.0, plot::Color::hex(0xFFB020));
  const u32 m = p.add_measure(a, b);
  PLOT_CHECK(p.measurement(m).valid);
  // Only 10 samples exist: x = 20 snaps to the last one, index 9.
  PLOT_CHECK_NEAR(p.measurement(m).ymax, 9.0, 1e-9);
  PLOT_CHECK_NEAR(p.measurement(m).dx, 7.0, 1e-9);

  for (u64 i = 10; i < 40; ++i) s.push(f32(i));
  s.acquire();
  // Same cursors, longer series: the cached result must be recomputed.
  PLOT_CHECK(p.measurement(m).valid);
  PLOT_CHECK_NEAR(p.measurement(m).ymax, 20.0, 1e-9);
  PLOT_CHECK_NEAR(p.measurement(m).dx, 18.0, 1e-9);
}

/// A saturated ring pins size() at capacity while x0() advances every acquire(),
/// so a cache keyed on (pointer, sample count) alone would freeze this measurement
/// on the first saturated frame -- the one case the demos never reach, because they
/// move their cursors (and therefore `dirty`) every frame.
///
/// The signal is a ramp in absolute x, so the value a cursor names once the window
/// has slid past it is the current window's oldest sample: a live cache tracks
/// x0(), a frozen one keeps reporting the first frame's numbers. The counter is the
/// other half of the contract -- a frame in which nothing moved is still a cache
/// hit, or the fix would have traded a stale readout for a per-frame recompute.
PLOT_TEST(saturated_stream_measurement_tracks_the_sliding_window) {
  constexpr u64 kCapacity = 64;
  plot::data::StreamSeries s(kCapacity, 0.0, 1.0);
  for (u64 i = 0; i < kCapacity; ++i) s.push(f32(i));   // y == absolute x
  s.acquire();
  PLOT_CHECK(s.size() == kCapacity);                    // published window is full

  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 100.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 100.0}, false, plot::AxisPlace::Left, false});
  p.add_trace({&s, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});
  const u32 a = p.add_cursor(10.0, plot::Color::hex(0xFFB020));
  const u32 b = p.add_cursor(60.0, plot::Color::hex(0xFFB020));
  const u32 m = p.add_measure(a, b);

  // First window, both cursors inside it: y over absolute x 10..60.
  PLOT_CHECK(p.measurement(m).valid);
  PLOT_CHECK_NEAR(p.measurement(m).ymin, 10.0, 1e-9);
  PLOT_CHECK_NEAR(p.measurement(m).ymax, 60.0, 1e-9);
  PLOT_CHECK_NEAR(p.measurement(m).mean, 35.0, 1e-9);
  PLOT_CHECK_NEAR(p.measurement(m).dx, 50.0, 1e-9);

  auto counter = [] {
    return plot::detail::measure_recomputes().load(std::memory_order_relaxed);
  };
  plot::detail::measure_recomputes().store(0, std::memory_order_relaxed);
  // Neither cursor moves and neither does the window: eight reads, no recompute.
  for (int i = 0; i < 8; ++i) (void)p.measurement(m);
  PLOT_CHECK(counter() == 0u);

  // Slide the window past cursor `a` -- 40 more samples and an acquire, with the
  // sample count unchanged (still capacity) and neither cursor touched.
  for (u64 i = kCapacity; i < kCapacity + 40; ++i) s.push(f32(i));
  s.acquire();
  PLOT_CHECK(s.size() == kCapacity);                    // size() cannot be the key
  PLOT_CHECK_NEAR(s.x0(), 40.0, 1e-9);                  // x0() moved under it

  const plot::Measurement& slid = p.measurement(m);     // one acquire, one recompute
  PLOT_CHECK(counter() == 1u);
  PLOT_CHECK(slid.valid);
  PLOT_CHECK_NEAR(slid.ymin, 40.0, 1e-9);               // `a` clamped onto the new x0()
  PLOT_CHECK_NEAR(slid.ymax, 60.0, 1e-9);
  PLOT_CHECK_NEAR(slid.mean, 50.0, 1e-9);
  PLOT_CHECK_NEAR(slid.dx, 20.0, 1e-9);

  // And it keeps tracking, one recompute per acquire with the cursors still.
  for (u64 i = 0; i < 5; ++i) {
    s.push(f32(kCapacity + 40 + static_cast<f64>(i)));
    s.acquire();
    PLOT_CHECK_NEAR(p.measurement(m).ymin, 41.0 + static_cast<f64>(i), 1e-9);
    PLOT_CHECK(counter() == 2u + i);
  }
}

PLOT_TEST(inverted_and_out_of_range_measurements_are_invalid) {
  plot::data::ArraySeries s(ramp(10), 0.0, 1.0);
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 9.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 9.0}, false, plot::AxisPlace::Left, false});
  const u32 a = p.add_cursor(8.0, plot::Color::hex(0xFFB020));
  const u32 b = p.add_cursor(2.0, plot::Color::hex(0xFFB020));
  const u32 m_inverted = p.add_measure(a, b);
  PLOT_CHECK(!p.measurement(m_inverted).valid);
  p.add_trace({nullptr, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});   // trace 0 has no series
  const u32 m_null = p.add_measure(b, a, 0);
  PLOT_CHECK(!p.measurement(m_null).valid);
  const u32 m_bad_cursors = p.add_measure(50u, 51u);
  PLOT_CHECK(!p.measurement(m_bad_cursors).valid);
  PLOT_CHECK(!p.measurement(99u).valid);                             // unknown measure id
}

PLOT_TEST(auto_fit_log_axis_stays_positive_and_ordered) {
  // All-negative trace bounds: nothing to show on a log axis, so the fit is
  // refused and the caller's (positive) range survives untouched.
  {
    std::vector<f32> y = {-5.0f, -3.0f, -1.0f};
    plot::data::ArraySeries s(std::move(y), 0.0, 1.0);
    plot::Plot p;
    p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    const u32 ax = p.add_x_axis({"t", {1.0, 10.0}, false, plot::AxisPlace::Bottom, false});
    const u32 ay = p.add_y_axis({"v", {1.0, 100.0}, true, plot::AxisPlace::Left, true});
    p.add_trace({&s, plot::Color::hex(0x40C0FF), 1.5f, ax, ay});
    p.auto_fit_y(ay);
    check_log_axis_range(p.y_range(ay));
    PLOT_CHECK_NEAR(p.y_range(ay).min, 1.0, 1e-12);
    PLOT_CHECK_NEAR(p.y_range(ay).max, 100.0, 1e-12);
    (void)p.layout();                     // the per-layout refit refuses too
    check_log_axis_range(p.y_range(ay));
    PLOT_CHECK_NEAR(p.y_range(ay).max, 100.0, 1e-12);
  }

  // All-zero bounds: same refusal, no "0" or negative bound on the axis. One
  // sample at x = 0 makes both bounds exactly {0, 0}.
  {
    std::vector<f32> y = {0.0f};
    plot::data::ArraySeries s(std::move(y), 0.0, 1.0);
    plot::Plot p;
    p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    const u32 ax = p.add_x_axis({"t", {1.0, 10.0}, true, plot::AxisPlace::Bottom, true});
    const u32 ay = p.add_y_axis({"v", {1.0, 10.0}, true, plot::AxisPlace::Left, true});
    p.add_trace({&s, plot::Color::hex(0x40C0FF), 1.5f, ax, ay});
    p.auto_fit_x();
    p.auto_fit_y(ay);
    check_log_axis_range(p.x_range(ax));
    check_log_axis_range(p.y_range(ay));
    PLOT_CHECK_NEAR(p.x_range(ax).min, 1.0, 1e-12);   // refused: range untouched
    PLOT_CHECK_NEAR(p.x_range(ax).max, 10.0, 1e-12);
    PLOT_CHECK_NEAR(p.y_range(ay).min, 1.0, 1e-12);
    PLOT_CHECK_NEAR(p.y_range(ay).max, 10.0, 1e-12);
  }

  // Spanning zero with some positive samples: the fit uses the positive part, and
  // the positive data stays inside the range.
  {
    std::vector<f32> y = {-1.0f, 0.5f, 3.0f};
    plot::data::ArraySeries s(std::move(y), -1.0, 1.0);   // x bounds {-1, 1}
    plot::Plot p;
    p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    const u32 ax = p.add_x_axis({"t", {1.0, 10.0}, true, plot::AxisPlace::Bottom, true});
    const u32 ay = p.add_y_axis({"v", {1.0, 100.0}, true, plot::AxisPlace::Left, true});
    p.add_trace({&s, plot::Color::hex(0x40C0FF), 1.5f, ax, ay});
    p.auto_fit_x();
    p.auto_fit_y(ay);
    check_log_axis_range(p.x_range(ax));
    check_log_axis_range(p.y_range(ay));
    PLOT_CHECK(p.x_range(ax).min <= 1.0);                 // the positive x data
    PLOT_CHECK(p.x_range(ax).max >= 1.0);
    PLOT_CHECK(p.y_range(ay).min <= 3.0);                 // the positive y data
    PLOT_CHECK(p.y_range(ay).max >= 3.0);
  }

  // Purely positive stays a plain log fit, still ordered and positive.
  {
    std::vector<f32> y = {1.0f, 2.0f, 3.0f};
    plot::data::ArraySeries s(std::move(y), 1.0, 1.0);    // x bounds {1, 3}
    plot::Plot p;
    p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    const u32 ax = p.add_x_axis({"t", {1.0, 10.0}, true, plot::AxisPlace::Bottom, true});
    const u32 ay = p.add_y_axis({"v", {1.0, 100.0}, true, plot::AxisPlace::Left, true});
    p.add_trace({&s, plot::Color::hex(0x40C0FF), 1.5f, ax, ay});
    p.auto_fit_x();
    p.auto_fit_y(ay);
    check_log_axis_range(p.x_range(ax));
    check_log_axis_range(p.y_range(ay));
    PLOT_CHECK(p.x_range(ax).min < 1.0 && p.x_range(ax).max > 3.0);
    PLOT_CHECK(p.y_range(ay).min < 1.0 && p.y_range(ay).max > 3.0);
  }
}

PLOT_TEST(grid_lines_are_tick_aligned_data_space_segments) {
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 10.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
  (void)p.layout();
  const plot::Grid& g = p.grid();
  const std::vector<plot::Tick>& xt = p.x_axis(ax).ticks;
  const std::vector<plot::Tick>& yt = p.y_axis(ay).ticks;
  PLOT_CHECK(!xt.empty());
  PLOT_CHECK(!yt.empty());
  PLOT_CHECK(g.size() == xt.size() + yt.size());
  for (const plot::Tick& t : xt) PLOT_CHECK(has_vertical(g, t.value, t.major));
  for (const plot::Tick& t : yt) PLOT_CHECK(has_horizontal(g, t.value, t.major));
  // Vertical grid lines span the y range, horizontal ones the x range: data
  // space only, so the renderer's uniform transform can place them.
  for (const plot::GridLine& l : g.lines()) {
    if (l.x0 == l.x1) {
      PLOT_CHECK_NEAR(l.y0, -1.0, 1e-12);
      PLOT_CHECK_NEAR(l.y1, 1.0, 1e-12);
    } else {
      PLOT_CHECK_NEAR(l.y0, l.y1, 1e-12);
      PLOT_CHECK_NEAR(l.x0, 0.0, 1e-12);
      PLOT_CHECK_NEAR(l.x1, 10.0, 1e-12);
    }
  }
  u32 minor = 0;
  for (const plot::GridLine& l : g.lines()) minor += l.major ? 0u : 1u;
  PLOT_CHECK(minor > 0);                          // minor grid is generated too
}

/// The grid's positions have one source -- the tick set -- and this pins that, in
/// both directions and in both spaces: a line with no tick and a tick with no line
/// are each a defect, and one direction alone is satisfied by a grid that drops
/// ticks or by one that invents them. A labelled major tick and a major grid line
/// therefore coincide *by construction* (spec §11), not by two derivations that
/// happen to agree on the ranges this case tries.
///
/// Screen space is checked beside data space because the renderer places a line by
/// mapping its endpoints through the axis' transform (`Renderer::draw_grid`), so
/// screen coincidence is what the pixels show. A log axis is among the ranges: that
/// transform is the one that is not the identity.
PLOT_TEST(major_grid_lines_coincide_with_major_ticks) {
  /// Both directions, both spaces, one line per tick -- for one laid-out plot.
  const auto check_pair = [](const plot::Plot& p, u32 ax, u32 ay, const char* what) {
    const plot::Grid& g = p.grid();
    const plot::Transform tx = p.x_transform(ax);
    const plot::Transform ty = p.y_transform(ay);
    const std::vector<plot::Tick>& xt = p.x_axis(ax).ticks;
    const std::vector<plot::Tick>& yt = p.y_axis(ay).ticks;
    PLOT_CHECK(!xt.empty());
    PLOT_CHECK(!yt.empty());

    // Exactly one line per tick of the tick set the grid was built from: none
    // dropped, none invented, and both classes carried through.
    PLOT_CHECK(count_lines(g, true, true) + count_lines(g, true, false) == xt.size());
    PLOT_CHECK(count_lines(g, false, true) + count_lines(g, false, false) == yt.size());
    PLOT_CHECK(count_lines(g, true, false) > 0u);   // the range really has minors
    PLOT_CHECK(count_lines(g, false, false) > 0u);

    // Every tick -> a line of its own class, and never of the other class.
    for (const plot::Tick& t : xt) {
      PLOT_CHECK(has_vertical(g, t.value, t.major));
      PLOT_CHECK(!has_vertical(g, t.value, !t.major));
      PLOT_CHECK(has_vertical_screen(g, tx, tx.to_screen_x(t.value), t.major));
    }
    for (const plot::Tick& t : yt) {
      PLOT_CHECK(has_horizontal(g, t.value, t.major));
      PLOT_CHECK(!has_horizontal(g, t.value, !t.major));
      PLOT_CHECK(has_horizontal_screen(g, ty, ty.to_screen_y(t.value), t.major));
    }
    // Every line -> a tick of its own class.
    for (const plot::GridLine& l : g.lines()) {
      if (l.x0 == l.x1) {
        PLOT_CHECK(tick_at(xt, l.x0));
      } else {
        PLOT_CHECK(tick_at(yt, l.y0));
      }
    }
    std::printf("[grid] %-22s x %u ticks (%u major) -> %u vertical lines; y %u ticks (%u major)"
                " -> %u horizontal, %s\n",
                what, static_cast<unsigned>(xt.size()), count_lines(g, true, true),
                count_lines(g, true, true) + count_lines(g, true, false),
                static_cast<unsigned>(yt.size()), count_lines(g, false, true),
                count_lines(g, false, true) + count_lines(g, false, false),
                (tx.log_x || ty.log_y) ? "log" : "linear");
  };

  // Several ranges and axes widths, so the check is not one nice-number step's
  // accident.
  struct Scene {
    const char* what;
    f64 lo, hi;
    f32 w, h;
  };
  const Scene scenes[] = {
      {"[0, 10] 800x400", 0.0, 10.0, 800.0f, 400.0f},
      {"[0, 100] 800x400", 0.0, 100.0, 800.0f, 400.0f},
      {"[-5, 5] 640x360", -5.0, 5.0, 640.0f, 360.0f},
      {"[0, 3.3] 200x120", 0.0, 3.3, 200.0f, 120.0f},  // a narrow axes: few ticks
  };
  for (const Scene& s : scenes) {
    plot::Plot p;
    p.set_viewport({0.0f, 0.0f, s.w, s.h});
    const u32 ax = p.add_x_axis({"t", {s.lo, s.hi}, false, plot::AxisPlace::Bottom, false});
    const u32 ay = p.add_y_axis({"v", {s.lo, s.hi}, false, plot::AxisPlace::Left, false});
    (void)p.layout();
    check_pair(p, ax, ay, s.what);
  }

  // A log pair: the same data-space coincidence, and the same once mapped through the
  // log10 pre-affine -- where an equal data step is *not* an equal screen step, so a
  // grid built on any second derivation would part company here first.
  {
    plot::Plot p;
    p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    const u32 ax = p.add_x_axis({"t", {1.0, 1000.0}, false, plot::AxisPlace::Bottom, true});
    const u32 ay = p.add_y_axis({"v", {1.0, 100.0}, false, plot::AxisPlace::Left, true});
    (void)p.layout();
    PLOT_CHECK(p.x_axis(ax).log);
    PLOT_CHECK(p.y_axis(ay).log);
    PLOT_CHECK(p.x_transform(ax).log_x);
    PLOT_CHECK(p.y_transform(ay).log_y);
    check_pair(p, ax, ay, "log [1, 1000]");
  }

  // A tick set with no minors in it -- `generate_ticks(..., include_minors = false)`,
  // the labelled set a caller draws numbers for -- makes a grid with no minors: the
  // grid owns no subdivision of its own. Both directions still hold, and the minor
  // class is empty on *both* sides, which is asserted rather than skipped: an empty
  // class on one side only is exactly the drift this case exists to catch.
  {
    std::vector<plot::Tick> xt;
    std::vector<plot::Tick> yt;
    plot::generate_ticks({0.0, 10.0}, 400.0f, 60.0f, xt, false);
    plot::generate_ticks({0.0, 1.0}, 300.0f, 60.0f, yt, false);
    PLOT_CHECK(!xt.empty());
    PLOT_CHECK(!yt.empty());
    for (const plot::Tick& t : xt) PLOT_CHECK(t.major);
    for (const plot::Tick& t : yt) PLOT_CHECK(t.major);

    plot::Grid g;
    g.build(xt, {0.0, 10.0}, yt, {0.0, 1.0});
    PLOT_CHECK(g.size() == xt.size() + yt.size());
    for (const plot::Tick& t : xt) {
      PLOT_CHECK(has_vertical(g, t.value, true));
      PLOT_CHECK(!has_vertical(g, t.value, false));
    }
    for (const plot::Tick& t : yt) {
      PLOT_CHECK(has_horizontal(g, t.value, true));
      PLOT_CHECK(!has_horizontal(g, t.value, false));
    }
    PLOT_CHECK(count_lines(g, true, false) == 0u);
    PLOT_CHECK(count_lines(g, false, false) == 0u);
    std::printf("[grid] majors-only tick set       %u x ticks, %u y ticks -> %zu lines, 0 minors\n",
                static_cast<unsigned>(xt.size()), static_cast<unsigned>(yt.size()), g.size());
  }

  // Two axis pairs. `Plot::build_grid()` builds the grid from the *primary* pair (x
  // axis 0, y axis 0) and `Renderer::draw_grid()` maps it with that pair's transforms
  // -- the comment there says so -- so a second pair's ticks get no lines at all.
  // Pinned rather than assumed: the coincidence above is with the primary pair's
  // ticks, and a value only the second axis ticks at has no line, in data space or on
  // screen. (A trace on the second pair is still drawn in the data area; it simply
  // has no grid of its own.)
  {
    plot::Plot p;
    p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    const u32 ax0 = p.add_x_axis({"a", {0.0, 100.0}, false, plot::AxisPlace::Bottom, false});
    const u32 ax1 = p.add_x_axis({"b", {0.0, 1.0}, false, plot::AxisPlace::Top, false});
    const u32 ay0 = p.add_y_axis({"v", {0.0, 100.0}, false, plot::AxisPlace::Left, false});
    const u32 ay1 = p.add_y_axis({"w", {0.0, 1.0}, false, plot::AxisPlace::Right, false});
    (void)p.layout();
    check_pair(p, ax0, ay0, "primary pair only");

    PLOT_CHECK(p.x_axis_count() == 2u);
    PLOT_CHECK(p.y_axis_count() == 2u);
    const plot::Grid& g = p.grid();
    const plot::Transform tx1 = p.x_transform(ax1);
    const plot::Transform ty1 = p.y_transform(ay1);
    u32 x_only_secondary = 0u;
    u32 y_only_secondary = 0u;
    for (const plot::Tick& t : p.x_axis(ax1).ticks) {
      if (tick_at(p.x_axis(ax0).ticks, t.value)) continue;  // 0 is on both ranges
      ++x_only_secondary;
      PLOT_CHECK(!has_vertical(g, t.value, t.major));
      PLOT_CHECK(!has_vertical_screen(g, tx1, tx1.to_screen_x(t.value), t.major));
    }
    for (const plot::Tick& t : p.y_axis(ay1).ticks) {
      if (tick_at(p.y_axis(ay0).ticks, t.value)) continue;
      ++y_only_secondary;
      PLOT_CHECK(!has_horizontal(g, t.value, t.major));
      PLOT_CHECK(!has_horizontal_screen(g, ty1, ty1.to_screen_y(t.value), t.major));
    }
    // The case is not vacuous: the second pair really does tick where the first does
    // not, so "no line there" is a statement about the build and not about the ranges.
    PLOT_CHECK(x_only_secondary > 0u);
    PLOT_CHECK(y_only_secondary > 0u);
    std::printf("[grid] primary pair only        %u secondary x ticks with no line, %u secondary y"
                " ticks with no line; the grid is the primary pair's %zu lines\n",
                static_cast<unsigned>(x_only_secondary),
                static_cast<unsigned>(y_only_secondary), g.size());
  }
}

// ------------------------------------------------------------------- legend

namespace {

/// The scene the legend cases measure: three named traces on one axis pair, a text
/// backend to measure the names with, and a viewport with room to spare. The names
/// are deliberately of different widths -- a panel sized to the *widest* one is what
/// the first case below checks, and names of one width could not tell that from a
/// panel sized to the first or the last.
struct LegendScene {
  plot::render::EmbeddedMonoFont font;
  plot::data::ArraySeries series;
  plot::Plot plot;

  LegendScene() : series(ramp(64), 0.0, 1.0) {
    plot.set_text_backend(&font);
    plot.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    const u32 ax = plot.add_x_axis({"t", {0.0, 63.0}, false, plot::AxisPlace::Bottom, false});
    const u32 ay = plot.add_y_axis({"v", {0.0, 63.0}, false, plot::AxisPlace::Left, false});
    plot.add_trace({&series, plot::Color::hex(0x40C0FF), 1.5f, ax, ay, "sine"});
    plot.add_trace({&series, plot::Color::hex(0xFFB020), 1.5f, ax, ay, "noise floor"});
    plot.add_trace({&series, plot::Color::hex(0x00E070), 1.5f, ax, ay, "ramp"});
  }
};

/// One row's height is the taller of the swatch and a text line: the number every
/// other assertion here is written against, derived from the config the layout reads.
f32 legend_row_height(const plot::Legend& cfg, const plot::render::TextBackend& font) {
  return std::max(cfg.swatch_h, font.height());
}

}  // namespace

PLOT_TEST(legend_panel_wraps_the_entries) {
  LegendScene scene;
  const plot::PlotLayout& l = scene.plot.layout();
  const plot::LegendLayout& legend = l.legend;
  const plot::Legend& cfg = scene.plot.legend();

  PLOT_CHECK(legend.rows.size() == 3u);
  const f32 pad = cfg.pad;
  const f32 row_h = legend_row_height(cfg, scene.font);
  const f32 row_gap = cfg.row_gap;
  const f32 widest = std::max({scene.font.measure("sine"), scene.font.measure("noise floor"),
                               scene.font.measure("ramp")});

  // Anchored in the corner `place` names (top right by default), one `margin` in
  // from the two edges that corner is near...
  PLOT_CHECK_NEAR(legend.panel.right(), l.axes.right() - cfg.margin, 1e-4);
  PLOT_CHECK_NEAR(legend.panel.y, l.axes.y + cfg.margin, 1e-4);
  // ... and measured, not guessed: a padding, the swatch, a gutter and the widest
  // name across; a padding, the rows and the gaps between them down.
  PLOT_CHECK_NEAR(legend.panel.w, 2.0f * pad + cfg.swatch_w + pad + widest, 1e-4);
  PLOT_CHECK_NEAR(legend.panel.h, 2.0f * pad + 3.0f * row_h + 2.0f * row_gap, 1e-4);

  // Every row in trace order, one row gap below the last, with the boxes the
  // renderer stages from already placed -- no arithmetic left for a caller.
  const f32 name_x = legend.panel.x + pad + cfg.swatch_w + pad;
  f32 row_y = legend.panel.y + pad;
  for (u32 i = 0; i < legend.rows.size(); ++i) {
    const plot::LegendRow& row = legend.rows[i];
    PLOT_CHECK(row.trace == i);
    PLOT_CHECK(!row.ellipsis);
    PLOT_CHECK_NEAR(row.swatch.x, legend.panel.x + pad, 1e-4);
    PLOT_CHECK_NEAR(row.swatch.y, row_y + 0.5f * (row_h - cfg.swatch_h), 1e-4);
    PLOT_CHECK_NEAR(row.swatch.w, cfg.swatch_w, 1e-4);
    PLOT_CHECK_NEAR(row.swatch.h, cfg.swatch_h, 1e-4);
    PLOT_CHECK_NEAR(row.name.x, name_x, 1e-4);
    PLOT_CHECK_NEAR(row.name.y, row_y + 0.5f * (row_h - scene.font.height()), 1e-4);
    PLOT_CHECK_NEAR(row.name.h, scene.font.height(), 1e-4);
    // Both boxes are inside the panel, swatch to panel edge and name to the padding
    // the panel reserved for it.
    PLOT_CHECK(row.swatch.x >= legend.panel.x);
    PLOT_CHECK(row.swatch.right() <= legend.panel.right());
    PLOT_CHECK(row.name.right() <= legend.panel.right() - pad + 1e-4f);
    row_y += row_h + row_gap;
  }

  // The wrapper property, stated as the number it is: the widest row's name ends
  // exactly one padding short of the panel's edge, which is what "the panel is
  // sized to the widest name" means. A panel sized to another row's name would fail
  // this by that row's difference in width.
  PLOT_CHECK_NEAR(legend.rows[1].name.w, widest, 1e-4);
  PLOT_CHECK_NEAR(legend.rows[1].name.right() + pad, legend.panel.right(), 1e-4);
}

/// A legend is inside `axes` in every corner, held off the two edges its corner is
/// near by `margin` and off the other two by its own measured size. The clamp is
/// what stops a legend from being drawn over the tick labels or the data the plot
/// reserved no room for -- it is inside the data area by construction, since the fit
/// above is measured against exactly this inset.
PLOT_TEST(legend_is_clamped_inside_the_axes) {
  LegendScene scene;
  const plot::LegendPlace places[4] = {plot::LegendPlace::TopLeft, plot::LegendPlace::TopRight,
                                       plot::LegendPlace::BottomLeft,
                                       plot::LegendPlace::BottomRight};
  for (const plot::LegendPlace place : places) {
    plot::Legend cfg = scene.plot.legend();
    cfg.place = place;
    scene.plot.set_legend(cfg);
    const plot::PlotLayout& l = scene.plot.layout();
    const plot::Rect& panel = l.legend.panel;
    PLOT_CHECK(!l.legend.empty());

    // Inside the data area: half-open containment, so the far edges compare directly.
    PLOT_CHECK(panel.x >= l.axes.x);
    PLOT_CHECK(panel.y >= l.axes.y);
    PLOT_CHECK(panel.right() <= l.axes.right());
    PLOT_CHECK(panel.bottom() <= l.axes.bottom());

    const bool near_right = place == plot::LegendPlace::TopRight ||
                            place == plot::LegendPlace::BottomRight;
    const bool near_bottom = place == plot::LegendPlace::BottomLeft ||
                             place == plot::LegendPlace::BottomRight;
    PLOT_CHECK_NEAR(near_right ? panel.right() : panel.x,
                    near_right ? l.axes.right() - cfg.margin : l.axes.x + cfg.margin, 1e-4);
    PLOT_CHECK_NEAR(near_bottom ? panel.bottom() : panel.y,
                    near_bottom ? l.axes.bottom() - cfg.margin : l.axes.y + cfg.margin, 1e-4);
  }
}

/// Entries that do not fit are dropped from the end and the panel says so with a
/// final marker row; a plot with no room for even one entry and its marker gets no
/// legend at all rather than a panel over the axes. Both halves are the same rule
/// read in opposite directions, so they are asserted together.
PLOT_TEST(legend_drops_overflowing_entries) {
  plot::render::EmbeddedMonoFont font;
  plot::data::ArraySeries series(ramp(64), 0.0, 1.0);
  plot::Plot p;
  p.set_text_backend(&font);
  p.set_viewport({0.0f, 0.0f, 400.0f, 260.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 63.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 63.0}, false, plot::AxisPlace::Left, false});
  constexpr u32 kNamed = 20;
  for (u32 i = 0; i < kNamed; ++i) p.add_trace({&series, plot::Color::hex(0x40C0FF), 1.5f, ax, ay,
                                                "trace " + std::to_string(i)});

  const plot::PlotLayout& l = p.layout();
  const plot::LegendLayout& legend = l.legend;
  const plot::Legend& cfg = p.legend();
  const f32 pad = cfg.pad;
  const f32 row_h = legend_row_height(cfg, font);

  // Re-derive the rule rather than assert a coincidence: the largest number of kept
  // entries whose panel -- with the marker row it needs once anything was dropped --
  // still fits the inset box. `k + 1` rows is the truncated case, `k` the untruncated
  // one; both are tried from the top down, exactly as the layout does.
  const f32 room_h = l.axes.h - 2.0f * cfg.margin;
  u32 expected = 0;
  for (u32 k = kNamed; k > 0u; --k) {
    const bool truncated = k < kNamed;
    const f32 rows = static_cast<f32>(k + (truncated ? 1u : 0u));
    if (2.0f * pad + rows * row_h + (rows - 1.0f) * cfg.row_gap <= room_h) {
      expected = k;
      break;
    }
  }
  // The scene has to be one where the rule actually bites, or the case proves
  // nothing about dropping entries.
  PLOT_CHECK(expected != 0u);
  PLOT_CHECK(expected < kNamed);
  PLOT_CHECK(legend.rows.size() == expected + 1u);

  // The kept entries are the first `expected` ones, in trace order: entries are
  // dropped from the end, never from the middle.
  for (u32 i = 0; i < expected; ++i) {
    PLOT_CHECK(!legend.rows[i].ellipsis);
    PLOT_CHECK(legend.rows[i].trace == i);
  }
  const plot::LegendRow& marker = legend.rows.back();
  PLOT_CHECK(marker.ellipsis);
  PLOT_CHECK(marker.name.x == legend.rows[0].name.x);  // the marker lines up with the names
  PLOT_CHECK_NEAR(marker.name.w, font.measure(plot::kLegendEllipsis), 1e-4);
  PLOT_CHECK(marker.swatch.w == 0.0f && marker.swatch.h == 0.0f);  // no trace, no swatch

  // The panel with the marker is inside `axes`, which is the property the drop
  // exists to keep: a panel that overhung the plot would be worse than a short list.
  PLOT_CHECK(legend.panel.x >= l.axes.x && legend.panel.right() <= l.axes.right());
  PLOT_CHECK(legend.panel.y >= l.axes.y && legend.panel.bottom() <= l.axes.bottom());

  // Not even one entry plus the marker fits: no legend at all, and nothing drawn.
  plot::Plot tiny;
  tiny.set_text_backend(&font);
  tiny.set_viewport({0.0f, 0.0f, 120.0f, 60.0f});
  const u32 tax = tiny.add_x_axis({"t", {0.0, 63.0}, false, plot::AxisPlace::Bottom, false});
  const u32 tay = tiny.add_y_axis({"v", {0.0, 63.0}, false, plot::AxisPlace::Left, false});
  tiny.add_trace({&series, plot::Color::hex(0x40C0FF), 1.5f, tax, tay, "sine"});
  const plot::PlotLayout& tl = tiny.layout();
  PLOT_CHECK(tl.legend.empty());
  PLOT_CHECK_NEAR(tl.legend.panel.w, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(tl.legend.panel.h, 0.0f, 1e-6);
}

/// A trace with no name is not an entry, and neither is a trace with no series to
/// draw -- the same "visible" test every other consumer of a trace makes. This is
/// the whole cost of the feature for a caller that never names a trace: nothing.
PLOT_TEST(unnamed_traces_produce_no_legend) {
  plot::render::EmbeddedMonoFont font;
  plot::data::ArraySeries series(ramp(64), 0.0, 1.0);
  plot::Plot p;
  p.set_text_backend(&font);
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 63.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 63.0}, false, plot::AxisPlace::Left, false});
  p.add_trace({&series, plot::Color::hex(0x40C0FF), 1.5f, ax, ay});           // no name
  p.add_trace({nullptr, plot::Color::hex(0xFFB020), 1.5f, ax, ay, "ghost"});  // named, no series
  p.add_trace({&series, plot::Color::hex(0x00E070), 1.5f, ax, ay, "sig"});

  const plot::PlotLayout& l = p.layout();
  PLOT_CHECK(l.legend.rows.size() == 1u);
  PLOT_CHECK(l.legend.rows[0].trace == 2u);   // the named, drawable one, by its own id
  PLOT_CHECK(!l.legend.rows[0].ellipsis);

  // Without the one name, the layout is empty and zero-sized: no panel, no rows.
  plot::Plot unnamed;
  unnamed.set_text_backend(&font);
  unnamed.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 uax = unnamed.add_x_axis({"t", {0.0, 63.0}, false, plot::AxisPlace::Bottom, false});
  const u32 uay = unnamed.add_y_axis({"v", {0.0, 63.0}, false, plot::AxisPlace::Left, false});
  unnamed.add_trace({&series, plot::Color::hex(0x40C0FF), 1.5f, uax, uay});
  unnamed.add_trace({&series, plot::Color::hex(0xFFB020), 1.5f, uax, uay});
  const plot::LegendLayout& none = unnamed.layout().legend;
  PLOT_CHECK(none.empty());
  PLOT_CHECK_NEAR(none.panel.w, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(none.panel.h, 0.0f, 1e-6);
}

/// A plot has no font of its own, so a legend with nothing to measure a name with is
/// no legend: the plot keeps the defaults it laid out with before legends existed.
PLOT_TEST(no_text_backend_produces_no_legend) {
  plot::data::ArraySeries series(ramp(64), 0.0, 1.0);
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 63.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 63.0}, false, plot::AxisPlace::Left, false});
  p.add_trace({&series, plot::Color::hex(0x40C0FF), 1.5f, ax, ay, "sine"});

  const plot::PlotLayout& l = p.layout();
  PLOT_CHECK(p.text_backend() == nullptr);
  PLOT_CHECK(l.legend.empty());
  PLOT_CHECK_NEAR(l.legend.panel.w, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.legend.panel.h, 0.0f, 1e-6);
  // Nothing else moved either: the strips are the no-backend defaults, not metrics a
  // legend could not measure.
  PLOT_CHECK_NEAR(l.y_axis_width, 56.0f, 1e-6);
  PLOT_CHECK_NEAR(l.x_axis_height, 22.0f, 1e-6);
}

/// Switching the legend off is not the same as the plot having nothing to list: the
/// entries exist, the layout is empty, and -- the reason it matters -- the axes rect
/// is *identical*, because a legend is drawn inside the data area and reserves none
/// of it. A legend that changed `axes` would rescale every plot the moment a trace
/// was named.
PLOT_TEST(legend_hidden_by_visible_false_draws_nothing) {
  LegendScene scene;
  const plot::Rect shown_axes = scene.plot.layout().axes;
  PLOT_CHECK(!scene.plot.layout().legend.empty());

  plot::Legend cfg = scene.plot.legend();
  cfg.visible = false;
  scene.plot.set_legend(cfg);
  const plot::PlotLayout& l = scene.plot.layout();
  PLOT_CHECK(l.legend.empty());
  PLOT_CHECK_NEAR(l.legend.panel.w, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.legend.panel.h, 0.0f, 1e-6);
  PLOT_CHECK_NEAR(l.axes.x, shown_axes.x, 1e-6);
  PLOT_CHECK_NEAR(l.axes.y, shown_axes.y, 1e-6);
  PLOT_CHECK_NEAR(l.axes.w, shown_axes.w, 1e-6);
  PLOT_CHECK_NEAR(l.axes.h, shown_axes.h, 1e-6);

  // ... and switching it back on lists the same three entries again.
  cfg.visible = true;
  scene.plot.set_legend(cfg);
  PLOT_CHECK(scene.plot.layout().legend.rows.size() == 3u);
}

// --- the UI scale: logical metrics, one physical size at any DPI -------------

/// A minimum tick spacing is a physical gap between labels, so the same *logical*
/// plot width must get the same major ticks at any scale. This is the failure mode
/// on the under-eager side: an unscaled `tick_min_px` measured against a 2x-wide
/// framebuffer packs twice as many ticks onto the same panel, and the grid's density
/// becomes a property of the display instead of the data.
PLOT_TEST(tick_spacing_is_physical) {
  plot::render::EmbeddedMonoFont font;

  // No y axis, and so no y label strip: with a text backend present the axes width
  // is then the viewport width *exactly* (`layout()` reserves a left strip only for
  // the axes that have labels), and the two runs differ in the display's scale and
  // nothing else. The strips' own scaling is the render smoke test's subject; this
  // case isolates the tick rule.
  plot::Plot one;
  one.set_text_backend(&font);
  one.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax1 = one.add_x_axis({"t", {0.0, 1000.0}, false, plot::AxisPlace::Bottom, false});
  const plot::PlotLayout& lay1 = one.layout();
  PLOT_CHECK_NEAR(lay1.axes.w, 800.0f, 1e-6);

  plot::Plot two;
  two.set_text_backend(&font);
  two.set_ui_scale(2.0f);
  two.set_viewport({0.0f, 0.0f, 1600.0f, 800.0f});  // the same plot, a 2x display
  const u32 ax2 = two.add_x_axis({"t", {0.0, 1000.0}, false, plot::AxisPlace::Bottom, false});
  const plot::PlotLayout& lay2 = two.layout();
  PLOT_CHECK_NEAR(lay2.axes.w, 1600.0f, 1e-6);

  // Both axes are 800 logical units wide, so both must carry the same major ticks.
  PLOT_CHECK_NEAR(lay2.axes.w / 2.0f, lay1.axes.w, 1e-6);
  const std::vector<f64> majors1 = major_tick_values(one.x_axis(ax1));
  const std::vector<f64> majors2 = major_tick_values(two.x_axis(ax2));
  PLOT_CHECK(majors1.size() > 2u);  // not vacuous: the case has ticks to lose
  PLOT_CHECK(majors2 == majors1);
  // The label strip is the same *logical* height too: its padding scaled even though
  // this backend's own metrics are fixed. (A frame drawn by a renderer also gets
  // metrics scaled with the display -- see the smoke test's two-scale case.)
  PLOT_CHECK(lay2.x_label_area.h > lay1.x_label_area.h);
}

/// The scale is an opt-in: nothing changes for a caller that never sets one, which
/// is what keeps this a unit change and not a behaviour change for existing code.
PLOT_TEST(ui_scale_defaults_to_one) {
  plot::render::Style s;
  PLOT_CHECK(s.ui_scale == 1.0f);
  // At 1.0 the conversion is the identity, exactly -- no rounding, no reordering.
  PLOT_CHECK(s.device(0.0f) == 0.0f);
  PLOT_CHECK(s.device(1.5f) == 1.5f);
  PLOT_CHECK(s.device(12.0f) == 12.0f);
  PLOT_CHECK(s.device(1234.5f) == 1234.5f);
  // A scale that is not a scale -- a host that has not measured its display -- is
  // 1:1 rather than zero, which would collapse every strip and stroke to nothing.
  s.ui_scale = 0.0f;
  PLOT_CHECK(s.device(12.0f) == 12.0f);
  s.ui_scale = -2.0f;
  PLOT_CHECK(s.device(12.0f) == 12.0f);

  plot::render::EmbeddedMonoFont font;
  // One plot left at the default and one told the scale is 1.0 lay out identically,
  // measured strips and legend included: the default *is* 1.0.
  plot::Plot plain;
  plot::Plot one;
  one.set_ui_scale(1.0f);
  plot::data::ArraySeries series(ramp(8), 0.0, 1.0);
  for (plot::Plot* p : {&plain, &one}) {
    p->set_text_backend(&font);
    p->set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    const u32 ax = p->add_x_axis({"t", {0.0, 7.0}, false, plot::AxisPlace::Bottom, false});
    const u32 ay = p->add_y_axis({"v", {0.0, 7.0}, false, plot::AxisPlace::Left, false});
    p->add_trace({&series, plot::Color::hex(0x40C0FF), 1.5f, ax, ay, "sine"});
  }
  const plot::PlotLayout& a = plain.layout();
  const plot::PlotLayout& b = one.layout();
  PLOT_CHECK(plain.ui_scale() == 1.0f);
  PLOT_CHECK(b.y_axis_width == a.y_axis_width);
  PLOT_CHECK(b.x_axis_height == a.x_axis_height);
  PLOT_CHECK(b.y_title_width == a.y_title_width);
  PLOT_CHECK(b.axes.x == a.axes.x);
  PLOT_CHECK(b.axes.h == a.axes.h);
  PLOT_CHECK(b.legend.panel.w == a.legend.panel.w);
  PLOT_CHECK(b.legend.panel.h == a.legend.panel.h);
}

// --------------------------------------------- live x follow (spec §12)
//
// The streaming case: the visible window is not a pair of numbers the caller chose
// but a *view from the live edge*, recomputed from the series' newest x on every
// frame. `XFollow::Off` -- the default, and every case above -- is unchanged; these
// cases are about the mode where following is explicit, and about the two numbers
// that survive the per-frame recompute: the span, and the offset behind the edge.

namespace {

/// A streaming plot: one `StreamSeries` on one x axis, 800x400, with `push`
/// samples already produced and acquired. The axis starts 10 units wide and follows
/// nothing until a case asks it to, so "Off is the default" is what every case here
/// starts from.
struct LiveFixture {
  plot::data::StreamSeries series;
  plot::Plot graph;
  u32 ax = 0;
  u32 ay = 0;

  explicit LiveFixture(u64 retain, u64 push) : series(retain, 0.0, 1.0) {
    graph.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
    ax = graph.add_x_axis({"t", {0.0, 10.0}, false, plot::AxisPlace::Bottom, false});
    ay = graph.add_y_axis({"v", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
    graph.add_trace({&series, plot::Color::hex(0x4FA3FF), 1.5f, ax, ay});
    feed(push);
    graph.layout();
  }

  /// Produces `n` samples and publishes them, the way a frame does.
  void feed(u64 n) {
    for (u64 i = 0; i < n; ++i) series.push(0.0f);
    series.acquire();
  }
  /// Arms following: the mode under test.
  void live() { graph.set_x_follow(ax, plot::XFollow::Live); }
  /// The newest x the series holds -- the live edge.
  f64 newest() const { return series.x_bounds().max; }
  plot::Range xr() const { return graph.x_range(ax); }
};

}  // namespace

/// The window's right edge *is* the newest sample, every frame, for as long as the
/// stream runs -- and the span stays the axis' own, because following scrolls the
/// window rather than rescaling it. The second half is what stops a "tracks the
/// newest sample" implementation from passing by re-fitting the whole retained
/// window each frame.
PLOT_TEST(live_window_tracks_the_newest_sample) {
  LiveFixture f(64, 4);
  f.live();
  const f64 span = f.xr().span();
  PLOT_CHECK_NEAR(f.xr().max, f.newest(), 1e-9);
  for (u64 i = 0; i < 40; ++i) {
    f.feed(3);
    f.graph.layout();
    PLOT_CHECK_NEAR(f.xr().max, f.newest(), 1e-9);
    PLOT_CHECK_NEAR(f.xr().span(), span, 1e-9);
    PLOT_CHECK_NEAR(f.xr().min, f.xr().max - span, 1e-9);
  }
  // The ring has saturated (40 * 3 + 4 > 64) and the window still ends at the newest
  // sample: the sliding retained window does not drag the view with it.
  PLOT_CHECK(f.series.size() == 64u);
}

/// "A plot with no trace on that axis, or a non-streaming series, keeps its stored
/// range": an array's bounds never slide, so `Live` has no edge to follow and the
/// axis behaves exactly as an `Off` one -- stored range, `auto_scale` and all.
PLOT_TEST(live_without_a_streaming_series_keeps_its_stored_range) {
  plot::data::ArraySeries array(ramp(51), 0.0, 1.0);  // x = 0 .. 50, fixed
  plot::Plot p;
  p.set_viewport({0, 0, 800, 400});
  const u32 ax = p.add_x_axis({"t", {3.0, 7.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
  const u32 empty = p.add_x_axis({"u", {0.0, 1.0}, false, plot::AxisPlace::Top, false});
  p.add_trace({&array, plot::Color::hex(0x4FA3FF), 1.5f, ax, ay});
  p.set_x_follow(ax, plot::XFollow::Live);
  p.set_x_follow(empty, plot::XFollow::Live);  // nothing bound to it at all
  p.layout();
  PLOT_CHECK_NEAR(p.x_range(ax).min, 3.0, 1e-9);
  PLOT_CHECK_NEAR(p.x_range(ax).max, 7.0, 1e-9);
  PLOT_CHECK_NEAR(p.x_range(empty).min, 0.0, 1e-9);
  PLOT_CHECK_NEAR(p.x_range(empty).max, 1.0, 1e-9);
  f64 newest = 0.0;
  PLOT_CHECK(!p.x_live_edge(ax, newest));  // and it says so, rather than inventing one

  // Auto scale still works on such an axis: the follow path is not involved, so
  // this is an ordinary fit -- the behaviour a static plot has always had.
  p.set_x_auto_scale(ax, true);
  p.layout();
  PLOT_CHECK(p.x_range(ax).min < 0.0);
  PLOT_CHECK(p.x_range(ax).max > 50.0);

  // ...and a caller-set range is stored verbatim, because there is no live edge to
  // express it relative to.
  p.set_x_range(ax, {-1.0, 2.0});
  p.layout();
  PLOT_CHECK_NEAR(p.x_range(ax).min, -1.0, 1e-9);
  PLOT_CHECK_NEAR(p.x_range(ax).max, 2.0, 1e-9);
}

/// Under `Live` -- with a live edge -- `set_x_range` is a statement about the span
/// and the offset, not about absolute positions: the window follows from those at
/// whatever is newest now. This is the reinterpretation every gesture goes through,
/// so it is pinned directly here rather than only through the controller.
PLOT_TEST(set_x_range_under_live_is_a_span_and_an_offset) {
  LiveFixture f(200, 20);  // newest = 19
  f.live();
  f.graph.set_x_range(f.ax, {f.newest() - 20.0 - 5.0, f.newest() - 5.0});
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 5.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().span(), 20.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, f.newest() - 5.0, 1e-9);
  PLOT_CHECK(f.graph.x_follow(f.ax) == plot::XFollow::Live);  // and still armed

  // The absolute numbers are gone: the same offset and span hold after the stream
  // has moved on, which is what a live window means.
  f.feed(30);
  f.graph.layout();
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 5.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().span(), 20.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, f.newest() - 5.0, 1e-9);
  PLOT_CHECK(f.xr().max > f.newest() - 5.0 - 1e-9);  // moved with the data
}

/// The offset is clamped against what the traces still hold -- `x_bounds()` for a
/// stream, i.e. the retained ring -- so the window's right edge can never be put
/// behind the oldest sample the ring has. Asking for more than that is not an
/// error: it is the end of the window, and the empty space in front of it is the
/// honest view of data the ring dropped.
PLOT_TEST(set_x_offset_clamps_to_the_retained_window) {
  LiveFixture f(64, 64);  // saturated: retains x = 0 .. 63
  f.live();
  const plot::Range retained = f.series.x_bounds();
  PLOT_CHECK_NEAR(retained.span(), 63.0, 1e-9);

  f.graph.set_x_offset(f.ax, 1.0e6);
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 63.0, 1e-9);  // clamped, not stored
  PLOT_CHECK_NEAR(f.xr().max, retained.min, 1e-9);      // the right edge stops at the oldest
  PLOT_CHECK_NEAR(f.xr().span(), 10.0, 1e-9);           // ...and the window is still the axis' span

  // The clamp stays honest as the ring slides: the offset is re-clamped against the
  // window the traces hold *now*, not the one they held when it was set.
  f.feed(20);
  f.graph.layout();
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), f.series.x_bounds().span(), 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, f.series.x_bounds().min, 1e-9);

  f.graph.set_x_offset(f.ax, -5.0);
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 0.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, f.newest(), 1e-9);

  // A value that is not a number is refused: the window it would place is not a
  // window, and there is no way back from one a caller could not see.
  f.graph.set_x_offset(f.ax, std::numeric_limits<f64>::quiet_NaN());
  PLOT_CHECK(std::isfinite(f.graph.x_offset(f.ax)));
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 0.0, 1e-9);
}

/// `auto_fit` under `Live` is the way *back* to the live edge: the span becomes the
/// retained window's and the offset returns to zero, so the window ends at the
/// newest sample -- and following stays armed, because a fit is not how a plot
/// stops following.
PLOT_TEST(auto_fit_returns_to_the_live_edge) {
  LiveFixture f(64, 40);
  f.live();
  f.graph.set_x_offset(f.ax, 12.0);
  PLOT_CHECK_NEAR(f.xr().max, f.newest() - 12.0, 1e-9);

  f.graph.auto_fit_x();
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 0.0, 1e-9);
  PLOT_CHECK(f.graph.x_follow(f.ax) == plot::XFollow::Live);
  PLOT_CHECK_NEAR(f.xr().max, f.newest(), 1e-9);
  // The fitted span is the retained window's, with the 2% margin auto-fit has always
  // taken on both ends.
  PLOT_CHECK_NEAR(f.xr().span(), 1.04 * f.series.x_bounds().span(), 1e-9);

  // And the next frame keeps it at the live edge rather than at the fitted window's
  // absolute position.
  f.feed(25);
  f.graph.layout();
  PLOT_CHECK_NEAR(f.xr().max, f.newest(), 1e-9);
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 0.0, 1e-9);
  PLOT_CHECK(f.graph.x_follow(f.ax) == plot::XFollow::Live);
}

/// The mode is opt-in and `Off` is the default, so nothing about an existing caller
/// changes: the range is stored verbatim, a layout never moves it, and an offset has
/// no effect on an axis that is not following. The gesture half of "a static plot is
/// unaffected" is in the controller's cases, where the gestures live.
PLOT_TEST(a_static_plot_is_unaffected) {
  LiveFixture f(64, 40);
  PLOT_CHECK(f.graph.x_follow(f.ax) == plot::XFollow::Off);  // the default
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 0.0, 1e-9);

  f.graph.set_x_range(f.ax, {-3.0, 7.0});
  PLOT_CHECK_NEAR(f.xr().min, -3.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, 7.0, 1e-9);  // absolute, exactly the numbers given
  PLOT_CHECK(!f.graph.x_axis(f.ax).auto_scale);

  // An offset on an axis that is not following changes nothing it draws: it is
  // stored, and applies when following is armed.
  f.graph.set_x_offset(f.ax, 9.0);
  f.feed(30);
  f.graph.layout();
  PLOT_CHECK_NEAR(f.xr().min, -3.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, 7.0, 1e-9);
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 9.0, 1e-9);
  f.graph.set_x_follow(f.ax, plot::XFollow::Live);
  PLOT_CHECK_NEAR(f.xr().max, f.newest() - 9.0, 1e-9);  // that far behind the live edge
  PLOT_CHECK_NEAR(f.xr().span(), 10.0, 1e-9);           // and the span it already had

  // Turning following off leaves the axis exactly where it is: the last live window
  // becomes an ordinary stored range and stays put as the stream moves on.
  f.graph.set_x_follow(f.ax, plot::XFollow::Off);
  const plot::Range frozen = f.xr();
  f.feed(30);
  f.graph.layout();
  PLOT_CHECK_NEAR(f.xr().min, frozen.min, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, frozen.max, 1e-9);
}

/// A degenerate range must not be able to strand a live axis. `set_x_range` under
/// `Live` is read as a span and an offset, and a span that is not a span is not a
/// window: storing it would leave the axis with a range nothing can place -- every
/// layout rejects a non-positive span -- and, because every gesture refuses one too,
/// with a range nothing can move either, while `x_follow()` still said `Live`. So the
/// one setter that could produce that state refuses to.
PLOT_TEST(a_degenerate_range_cannot_freeze_a_live_axis) {
  LiveFixture f(200, 40);
  f.live();
  const f64 span = f.xr().span();
  const f64 newest = f.newest();

  // A zero-width range is ignored: the axis keeps the span and the offset it holds.
  f.graph.set_x_range(f.ax, {newest, newest});
  PLOT_CHECK_NEAR(f.xr().span(), span, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, newest, 1e-9);
  PLOT_CHECK(f.graph.x_axis(f.ax).range.max > f.graph.x_axis(f.ax).range.min);
  PLOT_CHECK(f.graph.x_follow(f.ax) == plot::XFollow::Live);
  // ...and the stream carries on being followed, which is what the state was for.
  f.feed(10);
  f.graph.layout();
  PLOT_CHECK_NEAR(f.xr().max, f.newest(), 1e-9);

  // A non-finite endpoint is ignored for the same reason.
  f.graph.set_x_range(f.ax, {f.newest() - 5.0, std::numeric_limits<f64>::quiet_NaN()});
  PLOT_CHECK_NEAR(f.xr().span(), span, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, f.newest(), 1e-9);
  PLOT_CHECK(f.graph.x_follow(f.ax) == plot::XFollow::Live);

  // An inverted range is a caller's ordering slip, not a request to break the axis'
  // `min <= max` invariant -- every consumer of a range reads it as one -- so it is
  // normalised, and the window still spans what the two endpoints enclose.
  const f64 edge = f.newest();
  f.graph.set_x_range(f.ax, {edge - 5.0, edge - 15.0});
  PLOT_CHECK_NEAR(f.xr().span(), 10.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().max, edge - 5.0, 1e-9);
  PLOT_CHECK_NEAR(f.graph.x_offset(f.ax), 5.0, 1e-9);
  PLOT_CHECK(f.graph.x_follow(f.ax) == plot::XFollow::Live);

  // The offset that came with it is the one the next frames keep.
  f.feed(20);
  f.graph.layout();
  PLOT_CHECK_NEAR(f.xr().max, f.newest() - 5.0, 1e-9);
  PLOT_CHECK_NEAR(f.xr().span(), 10.0, 1e-9);
}

// --- regions: exact interval statistics (spec §5) ------------------------------

/// A region is an interval a user drags, so it lands *between* samples: the stats
/// must be over exactly the samples inside the bounds, which is what
/// `Series::reduce/sum/sumsq` answer for and what the pyramid's `*_buckets` forms,
/// counting whole buckets, cannot. The grid here is deliberately nothing a caller
/// could divide by -- `x0` is not 0 and `dx` is not 1 -- and the interval is not
/// bucket-aligned, so a bucket-grained or off-by-one answer changes the count.
///
/// The brute-force scan below applies the rule `RegionStats` documents -- the samples
/// whose x is at or after `x0` and at or before `x1`, both ends included -- so the two
/// are comparable at the last bit. Two spikes *outside* the interval are what make the
/// extremes an assertion about the interval rather than about the series.
PLOT_TEST(region_stats_match_bruteforce_over_an_unaligned_interval) {
  constexpr f64 kDx = 0.7;
  constexpr f64 kX0 = 3.0;
  constexpr f64 kLo = 10.4;
  constexpr f64 kHi = 47.6;
  constexpr u64 kCount = 53u;  // x = 3.0 + 0.7*i, i = 11..63, both ends inside

  std::vector<f32> ys = ramp(120);
  ys[20] = -100.0f;  // inside the interval: the minimum
  ys[40] = 200.0f;   // inside the interval: the maximum
  ys[5] = 500.0f;    // before it, on a sample
  ys[70] = -300.0f;  // after it, on a sample
  const std::vector<f32> samples = ys;               // the brute-force copy
  plot::data::ArraySeries s(ys, kX0, kDx);           // takes the vector by value

  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", s.x_bounds(), false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {-200.0, 200.0}, false, plot::AxisPlace::Left, false});
  const u32 tr = p.add_trace({&s, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});

  plot::Region reg;
  reg.x0 = kLo;
  reg.x1 = kHi;
  reg.snap = plot::RegionSnap::Free;  // stored verbatim: this is the interval under test
  const u32 rid = p.add_region(reg);

  const plot::RegionStats st = p.region_stats(rid, tr);
  PLOT_CHECK(st.valid);
  PLOT_CHECK(st.count == kCount);
  PLOT_CHECK_NEAR(st.x0, kLo, 1e-12);
  PLOT_CHECK_NEAR(st.x1, kHi, 1e-12);
  PLOT_CHECK_NEAR(st.width, kHi - kLo, 1e-9);
  PLOT_CHECK_NEAR(st.min, -100.0, 1e-9);  // the spike inside, never the one outside
  PLOT_CHECK_NEAR(st.max, 200.0, 1e-9);

  u64 count = 0;
  f64 sum = 0.0, sq = 0.0, lo = 0.0, hi = 0.0;
  for (u64 i = 0; i < samples.size(); ++i) {
    const f64 x = kX0 + kDx * static_cast<f64>(i);
    if (x < kLo || x > kHi) continue;
    const f64 v = static_cast<f64>(samples[static_cast<plot::usize>(i)]);
    if (count == 0u) {
      lo = v;
      hi = v;
    }
    lo = std::min(lo, v);
    hi = std::max(hi, v);
    sum += v;
    sq += v * v;
    ++count;
  }
  PLOT_CHECK(count == kCount);  // the scan and the query agree on the interval itself
  PLOT_CHECK_NEAR(st.mean, sum / static_cast<f64>(count), 1e-6);
  PLOT_CHECK_NEAR(st.rms, std::sqrt(sq / static_cast<f64>(count)), 1e-6);
  PLOT_CHECK_NEAR(st.min, lo, 1e-9);
  PLOT_CHECK_NEAR(st.max, hi, 1e-9);
  PLOT_CHECK_NEAR(st.integral, sum * kDx, 1e-6);  // left-Riemann, the measurement's rule

  // An interval whose bounds *are* sample x's takes both of those samples: the rule is
  // inclusive at each end, so this is one sample wider at the top than a half-open one.
  plot::Region exact;
  exact.x0 = kX0 + kDx * 11.0;  // 10.7
  exact.x1 = kX0 + kDx * 63.0;  // 47.1
  exact.snap = plot::RegionSnap::Free;
  const u32 rid_exact = p.add_region(exact);
  PLOT_CHECK(p.region_stats(rid_exact, tr).count == kCount);

  // Between two adjacent samples there is nothing to average, so the answer is
  // invalid and every field zero rather than a mean of no samples.
  plot::Region gap;
  gap.x0 = 10.71;
  gap.x1 = 10.79;
  gap.snap = plot::RegionSnap::Free;
  const u32 rid_gap = p.add_region(gap);
  const plot::RegionStats none = p.region_stats(rid_gap, tr);
  PLOT_CHECK(!none.valid);
  PLOT_CHECK(none.count == 0u && none.x0 == 0.0 && none.x1 == 0.0 && none.mean == 0.0);

  // A trace with no series and an id that names no region are invalid too.
  const u32 tr_null = p.add_trace({nullptr, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});
  PLOT_CHECK(!p.region_stats(rid, tr_null).valid);
  PLOT_CHECK(!p.region_stats(99u, tr).valid);

  // Moving a region moves the interval the statistics are over.
  p.set_region(rid, 32.0, 47.6);
  PLOT_CHECK(p.region_stats(rid, tr).count == 22u);   // x = 32.4 .. 47.1, i = 42..63
  PLOT_CHECK_NEAR(p.region_stats(rid, tr).min, 42.0, 1e-9);  // both spikes are outside it now
  PLOT_CHECK_NEAR(p.region_stats(rid, tr).max, 63.0, 1e-9);
}

/// A saturated ring pins `size()` at capacity while `x0()` advances every acquire, so
/// a region whose own bounds never move still covers a different set of samples each
/// frame. The cache key includes `x0()` for exactly this: with (series, sample count)
/// alone the readout would freeze on the first saturated frame, which is the bug the
/// measurement cache's third key exists to prevent and this statistic must not
/// reintroduce.
///
/// The signal is a ramp in absolute x, so a sample's value names its x: what the
/// statistics report once the window has slid past a cursor is the current window's
/// oldest sample, which a frozen cache cannot produce.
PLOT_TEST(region_stats_track_a_sliding_streaming_window) {
  constexpr u64 kCapacity = 64;
  plot::data::StreamSeries s(kCapacity, 0.0, 1.0);
  for (u64 i = 0; i < kCapacity; ++i) s.push(static_cast<f32>(i));  // y == absolute x
  s.acquire();
  PLOT_CHECK(s.size() == kCapacity);  // the published window is full from here on

  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 100.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 100.0}, false, plot::AxisPlace::Left, false});
  const u32 tr = p.add_trace({&s, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});

  plot::Region reg;
  reg.x0 = 10.0;
  reg.x1 = 60.0;
  reg.snap = plot::RegionSnap::Free;  // the region never moves; the window does
  const u32 rid = p.add_region(reg);
  plot::Region behind;
  behind.x0 = 0.0;
  behind.x1 = 5.0;
  behind.snap = plot::RegionSnap::Free;
  const u32 rid_behind = p.add_region(behind);

  // The returned reference aliases the cached slot the next read updates, so every
  // comparison here keeps a copy of the frame it is about.
  const plot::RegionStats first = p.region_stats(rid, tr);
  PLOT_CHECK(first.valid);
  PLOT_CHECK(first.count == 51u);  // absolute x 10..60
  PLOT_CHECK_NEAR(first.min, 10.0, 1e-9);
  PLOT_CHECK_NEAR(first.max, 60.0, 1e-9);
  PLOT_CHECK_NEAR(first.mean, 35.0, 1e-9);
  PLOT_CHECK_NEAR(first.integral, 35.0 * 51.0, 1e-9);
  PLOT_CHECK(p.region_stats(rid_behind, tr).valid);  // it is inside the window for now

  // Slide the window past the region's lower bound: 40 more samples and an acquire,
  // with the sample count unchanged and the region untouched.
  for (u64 i = kCapacity; i < kCapacity + 40u; ++i) s.push(static_cast<f32>(i));
  s.acquire();
  PLOT_CHECK(s.size() == kCapacity);    // size() cannot be the cache key
  PLOT_CHECK_NEAR(s.x0(), 40.0, 1e-9);  // x0() is what moved under it

  const plot::RegionStats slid = p.region_stats(rid, tr);
  PLOT_CHECK(slid.valid);
  PLOT_CHECK(slid.count == 21u);  // absolute x 40..60, the part the ring still holds
  PLOT_CHECK(slid.count != first.count);
  PLOT_CHECK_NEAR(slid.min, 40.0, 1e-9);
  PLOT_CHECK_NEAR(slid.max, 60.0, 1e-9);
  PLOT_CHECK_NEAR(slid.mean, 50.0, 1e-9);
  PLOT_CHECK_NEAR(slid.integral, 50.0 * 21.0, 1e-9);
  // The window has walked out from under the other region: no sample is left in it.
  PLOT_CHECK(!p.region_stats(rid_behind, tr).valid);

  // And it keeps tracking, one acquire at a time, with nothing but x0() moving.
  for (u32 i = 0; i < 5u; ++i) {
    s.push(static_cast<f32>(kCapacity + 40u + i));
    s.acquire();
    const plot::RegionStats step = p.region_stats(rid, tr);
    PLOT_CHECK(step.valid);
    PLOT_CHECK(step.count == 20u - i);  // absolute x (41 + i)..60
    PLOT_CHECK_NEAR(step.min, 41.0 + static_cast<f64>(i), 1e-9);
    PLOT_CHECK_NEAR(step.mean, 0.5 * (step.min + 60.0), 1e-9);
  }
}

/// Region ids are vector indices, so removing one shifts every id above it -- and the
/// statistics cache is keyed by that index, so it has to be re-indexed with the vector
/// rather than left naming the regions it was filled for. A stale key here would answer
/// for a *different* interval than the one asked about, which a count alone cannot see:
/// the three intervals below are all 11 samples wide, so these assertions are about the
/// extremes each id actually names.
PLOT_TEST(removing_a_region_shifts_the_ids_and_keeps_the_statistics) {
  plot::data::ArraySeries s(ramp(100), 0.0, 1.0);
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 99.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 99.0}, false, plot::AxisPlace::Left, false});
  const u32 tr = p.add_trace({&s, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});

  plot::Region bounds;
  bounds.snap = plot::RegionSnap::Free;  // the intervals under test are these numbers
  bounds.x0 = 10.0;
  bounds.x1 = 20.0;
  const u32 a = p.add_region(bounds);
  bounds.x0 = 30.0;
  bounds.x1 = 40.0;
  const u32 b = p.add_region(bounds);
  bounds.x0 = 50.0;
  bounds.x1 = 60.0;
  const u32 c = p.add_region(bounds);
  PLOT_CHECK(a == 0u && b == 1u && c == 2u);
  PLOT_CHECK(p.region_count() == 3u);
  // Filled on demand, in the order the caller asks: three entries, one per pair.
  PLOT_CHECK_NEAR(p.region_stats(a, tr).min, 10.0, 1e-9);
  PLOT_CHECK_NEAR(p.region_stats(b, tr).min, 30.0, 1e-9);
  PLOT_CHECK_NEAR(p.region_stats(c, tr).min, 50.0, 1e-9);

  p.remove_region(a);
  PLOT_CHECK(p.region_count() == 2u);
  PLOT_CHECK_NEAR(p.region(0).x0, 30.0, 1e-12);  // the old region 1
  PLOT_CHECK_NEAR(p.region(1).x0, 50.0, 1e-12);  // the old region 2
  // The surviving entries follow their regions down, so each id still answers for its own
  // interval rather than for the one that used to hold that index.
  PLOT_CHECK_NEAR(p.region_stats(0u, tr).min, 30.0, 1e-9);
  PLOT_CHECK_NEAR(p.region_stats(0u, tr).max, 40.0, 1e-9);
  PLOT_CHECK_NEAR(p.region_stats(1u, tr).min, 50.0, 1e-9);
  PLOT_CHECK_NEAR(p.region_stats(1u, tr).max, 60.0, 1e-9);
  // The id the removed region held now names the region that shifted into it -- there is
  // no hole in the vector -- and an id past the end names nothing and reads a default
  // rather than out of range. Neither has any statistics.
  PLOT_CHECK_NEAR(p.region(0u).x0, 30.0, 1e-12);
  PLOT_CHECK_NEAR(p.region(2u).x0, 0.0, 1e-12);
  PLOT_CHECK(!p.region_stats(2u, tr).valid);
  PLOT_CHECK(!p.region_stats(9u, tr).valid);
}

/// A bound that is not a number is not a bound. `std::min`/`std::max` propagate a NaN
/// through *both* ends of the pair, so accepting one would not merely invert the interval:
/// it would replace the finite partner too, and a `Free` region stored that way could never
/// be dragged back -- every motion re-derives both bounds from the stored ones. The other
/// bound setters in the file refuse a non-finite value outright, and these two write paths
/// have to as well: `set_region` leaves the region on the interval it already held, and
/// `add_region`, which does not route through it, adds nothing at all.
PLOT_TEST(non_finite_region_bounds_are_refused) {
  plot::data::ArraySeries s(ramp(100), 0.0, 1.0);
  plot::Plot p;
  p.set_viewport({0.0f, 0.0f, 800.0f, 400.0f});
  const u32 ax = p.add_x_axis({"t", {0.0, 99.0}, false, plot::AxisPlace::Bottom, false});
  const u32 ay = p.add_y_axis({"v", {0.0, 99.0}, false, plot::AxisPlace::Left, false});
  const u32 tr = p.add_trace({&s, plot::Color::hex(0xFFFFFF), 1.0f, ax, ay});

  plot::Region reg;
  reg.x0 = 10.0;
  reg.x1 = 20.0;
  reg.snap = plot::RegionSnap::Free;
  const u32 rid = p.add_region(reg);
  const f64 nan = std::numeric_limits<f64>::quiet_NaN();
  const f64 inf = std::numeric_limits<f64>::infinity();

  // Each of the four ways a pair can be unusable, and the interval is the same one after
  // every one of them -- both bounds, not just the bound that arrived bad.
  p.set_region(rid, nan, 20.0);
  PLOT_CHECK_NEAR(p.region(rid).x0, 10.0, 1e-12);
  PLOT_CHECK_NEAR(p.region(rid).x1, 20.0, 1e-12);
  p.set_region(rid, 10.0, nan);
  PLOT_CHECK_NEAR(p.region(rid).x0, 10.0, 1e-12);
  PLOT_CHECK_NEAR(p.region(rid).x1, 20.0, 1e-12);
  p.set_region(rid, 30.0, inf);
  PLOT_CHECK_NEAR(p.region(rid).x0, 10.0, 1e-12);
  PLOT_CHECK_NEAR(p.region(rid).x1, 20.0, 1e-12);
  p.set_region(rid, -inf, 5.0);
  PLOT_CHECK_NEAR(p.region(rid).x0, 10.0, 1e-12);
  PLOT_CHECK_NEAR(p.region(rid).x1, 20.0, 1e-12);
  // The interval it still holds is the one its statistics are over.
  PLOT_CHECK(p.region_stats(rid, tr).valid);
  PLOT_CHECK_NEAR(p.region_stats(rid, tr).min, 10.0, 1e-9);
  PLOT_CHECK_NEAR(p.region_stats(rid, tr).max, 20.0, 1e-9);

  // A region whose bounds are not numbers is refused rather than stored: the count does not
  // move, no id is handed out, and the id that came back names nothing.
  const u32 before = p.region_count();
  plot::Region bad = reg;
  bad.x0 = nan;  // the finite partner goes with it, which is why the pair is refused
  const u32 refused = p.add_region(bad);
  PLOT_CHECK(p.region_count() == before);
  PLOT_CHECK(refused != before);
  PLOT_CHECK_NEAR(p.region(refused).x0, 0.0, 1e-12);
  PLOT_CHECK_NEAR(p.region(refused).x1, 0.0, 1e-12);
  PLOT_CHECK(!p.region_stats(refused, tr).valid);
  // The next region a caller adds still takes the next free id, so a refusal leaves the plot
  // exactly as it was rather than a hole a later id would fall into.
  plot::Region good = reg;
  good.x0 = 30.0;
  good.x1 = 40.0;
  PLOT_CHECK(p.add_region(good) == before);
  PLOT_CHECK(p.region_count() == before + 1u);
  PLOT_CHECK_NEAR(p.region(before).x0, 30.0, 1e-12);
}