feat(plot): a figure can keep an empty band to the right of its data

`layout_.axes` reached the viewport's right edge, so the rightmost x tick
label -- centred on its tick -- had half of itself outside the plot, and
the newest sample's ink landed on the frame. `Plot::set_right_gutter()`
reserves a band there, out of the same `1 - kMinAxesShare` allowance the
label and title strips are served from, so it can no more squeeze `axes`
below the half-viewport floor than they can. `Figure` sets one value on
every row, the left gutter's reason: the rows' axes have to end on a
common column as well as start on one.

Nothing is drawn in the band, so unlike the strips it is a want and never
a measurement: no measuring pass, and it cannot feed the layout's fixed
point.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

include/plot/plot/figure.hpp

@@ -138,6 +138,16 @@ class Figure {
   }
   f32 min_y_gutter() const noexcept { return min_y_gutter_; }
 
+  /// The empty band every row keeps to the right of its `axes`, in device pixels (0.0
+  /// by default, so `axes` reaches the viewport's right edge). It is set here rather
+  /// than row by row for the left gutter's reason: the rows' axes have to line up, and
+  /// they end on a common column only if they are told one width. See
+  /// `Plot::set_right_gutter()` for what it is for. Negative values are clamped to 0.
+  void set_right_gutter(f32 device_px) noexcept {
+    right_gutter_ = device_px > 0.0f ? device_px : 0.0f;
+  }
+  f32 right_gutter() const noexcept { return right_gutter_; }
+
   /// Whether the shared x axis is the figure's: every row reserves no x label strip
   /// and one shared axis is drawn under the last row (the default), or every row
   /// draws its own labels and the figure draws nothing extra.
@@ -326,6 +336,7 @@ class Figure {
   FigureLayout layout_{};
   f32 row_gap_ = 0.0f;
   f32 min_y_gutter_ = 0.0f;
+  f32 right_gutter_ = 0.0f;
   bool labels_bottom_only_ = true;
 };
 

include/plot/plot/plot.hpp

@@ -88,6 +88,11 @@ struct PlotLayout {
   /// no text backend there is no title to lay out at all and both stay 0.0f.
   f32 y_title_width = 0.0f;
   f32 x_title_height = 0.0f;
+  /// The empty band kept between `axes`' right edge and the viewport's, 0.0f unless a
+  /// caller asked for one (see `Plot::set_right_gutter()`). Reported because it is
+  /// clamped by the same cap as the strips above, so what was asked for and what was
+  /// reserved are not always the same number.
+  f32 right_gutter = 0.0f;
   /// The measured legend: inside `axes`, never reserving any part of it, and empty
   /// when there is nothing to draw. It is measured with the same text backend the
   /// strips above are, and against the same `axes` rect the caller reads back, so
@@ -640,6 +645,20 @@ class Plot {
   }
   f32 min_y_gutter() const noexcept { return min_y_gutter_; }
 
+  /// An empty band reserved between `axes`' right edge and the viewport's, in device
+  /// pixels. 0.0 -- the default -- is what the layout has always done: `axes` reaches
+  /// the viewport's right edge, which leaves the rightmost x tick label, *centred* on
+  /// that edge, half of it to be drawn in and nothing to draw it in -- and puts the
+  /// newest sample's ink on the frame. It is the mirror of the left gutter in purpose
+  /// and not in kind: nothing is drawn here, so there is nothing to measure and the
+  /// value is the caller's to choose. Reserved inside the same cap as the label and
+  /// title strips, so it can no more squeeze `axes` below the half-viewport floor than
+  /// they can. Negative values are clamped to 0.
+  void set_right_gutter(f32 device_px) noexcept {
+    right_gutter_ = device_px > 0.0f ? device_px : 0.0f;
+  }
+  f32 right_gutter() const noexcept { return right_gutter_; }
+
   /// Grid segments for the primary axis pair (x axis 0, y axis 0), in data space.
   const Grid& grid() const noexcept { return grid_; }
 
@@ -867,6 +886,9 @@ class Plot {
   /// The floor a figure imposes on the left gutter; see set_min_y_gutter(). 0.0 means
   /// none, which is what a plot standing on its own keeps.
   f32 min_y_gutter_ = 0.0f;
+  /// The empty band kept to the right of `axes`; see set_right_gutter(). 0.0 means none,
+  /// which is what the layout did before the setter existed.
+  f32 right_gutter_ = 0.0f;
   /// Which handles a pointer is on, published by the input layer (see HotHandles).
   HotHandles hot_{};
 

src/plot/figure.cpp

@@ -451,6 +451,10 @@ const FigureLayout& Figure::layout() {
     // not drawn once per row. A figure told to label every row keeps them everywhere,
     // and then there is no shared axis to speak of: each row has its own.
     p.set_x_strip_mode(labels_bottom_only_ && row != bottom_row ? XStrip::None : XStrip::Both);
+    // Before either pass below, and the same value for every row: nothing is measured on
+    // the right, so unlike the left gutter this needs no measurement pass -- the rows end
+    // on a common column because they are all told the one width.
+    p.set_right_gutter(right_gutter_);
   }
   // After the viewports, so a row's ticks and grid -- built from its axes rect -- and
   // its transforms describe this frame's rects; and before the rows lay themselves

src/plot/plot.cpp

@@ -1039,12 +1039,21 @@ const PlotLayout& Plot::layout() {
     x_height = std::min(x_height, x_budget);
     const f32 y_title_width = std::min(y_title_w, y_budget - y_width);
     const f32 x_title_height = std::min(x_title_h, x_budget - x_height);
+    // The right-hand band, out of what is left of the same allowance the two left
+    // strips were served from -- so the three together cannot take more than
+    // `1 - kMinAxesShare` of the width however much each asks for. Nothing is drawn
+    // in it, so unlike the strips above it is a want and never a measurement, and it
+    // cannot feed the fixed point below: the y labels are chosen from the row's range
+    // and height, so a narrower `axes` does not change what they need.
+    const f32 right_gutter =
+        std::min(right_gutter_, y_budget - (y_width + y_title_width));
     layout_.y_axis_width = y_width;
     layout_.x_axis_height = x_height;
     layout_.y_title_width = y_title_width;
     layout_.x_title_height = x_title_height;
+    layout_.right_gutter = right_gutter;
     layout_.axes = Rect{viewport_.x + y_width + y_title_width, viewport_.y,
-                        vw - (y_width + y_title_width),
+                        vw - (y_width + y_title_width + right_gutter),
                         vh - (x_height + x_title_height)};
     layout_.y_title_area = Rect{viewport_.x, layout_.axes.y, y_title_width, layout_.axes.h};
     layout_.y_label_area =

tests/test_figure.cpp

@@ -425,6 +425,52 @@ PLOT_TEST(figure_gutter_never_squeezes_the_axes_below_the_floor) {
   }
 }
 
+/// The other side of the same band. `axes` reached the viewport's right edge, which left
+/// the rightmost x tick label -- centred on it -- half outside the plot, so a figure can
+/// ask for an empty band there. One value for every row, like the left gutter, because
+/// the rows' axes have to end on a common column as well as start on one.
+PLOT_TEST(figure_rows_share_one_right_gutter) {
+  plot::Figure figure = different_magnitude_figure();
+  figure.layout();
+  const plot::f32 flush = figure.plot(0u).layout().axes.right();
+  PLOT_CHECK_NEAR(static_cast<plot::f64>(figure.right_gutter()), 0.0, 1e-12);
+  // The default is the layout as it always was: nothing between the data and the frame.
+  PLOT_CHECK_NEAR(static_cast<plot::f64>(flush), static_cast<plot::f64>(kW), 1e-4);
+
+  figure.set_right_gutter(30.0f);
+  figure.layout();
+  const plot::Rect first = figure.plot(0u).layout().axes;
+  for (plot::u32 row = 0; row < 3u; ++row) {
+    const plot::PlotLayout& rl = figure.plot(row).layout();
+    PLOT_CHECK_NEAR(static_cast<plot::f64>(rl.right_gutter), 30.0, 1e-4);
+    PLOT_CHECK_NEAR(static_cast<plot::f64>(rl.axes.right()), static_cast<plot::f64>(kW) - 30.0,
+                    1e-4);
+    // The band comes off the right alone: the left gutter the rows agreed on is untouched,
+    // so a host can balance the two sides without the one moving when it sets the other.
+    PLOT_CHECK_NEAR(static_cast<plot::f64>(rl.axes.x), static_cast<plot::f64>(first.x), 1e-4);
+    PLOT_CHECK_NEAR(static_cast<plot::f64>(rl.axes.w), static_cast<plot::f64>(first.w), 1e-4);
+    // ... and the x strip follows the data area rather than the viewport, or the shared
+    // axis would be labelled over a band that holds no data.
+    PLOT_CHECK_NEAR(static_cast<plot::f64>(rl.x_label_area.w), static_cast<plot::f64>(rl.axes.w),
+                    1e-4);
+  }
+  // Clamped by the same cap as the strips: a band wider than the whole figure cannot
+  // squeeze `axes` below the floor `Plot::layout()` guarantees.
+  figure.set_right_gutter(10.0f * kW);
+  figure.layout();
+  for (plot::u32 row = 0; row < 3u; ++row) {
+    const plot::Rect& axes = figure.plot(row).layout().axes;
+    PLOT_CHECK(axes.w >= 0.5f * kW - 1e-3f);
+  }
+  // Negative means "none", like the gutter and the row gap, and the data area goes back
+  // to the viewport's edge.
+  figure.set_right_gutter(-5.0f);
+  PLOT_CHECK_NEAR(static_cast<plot::f64>(figure.right_gutter()), 0.0, 1e-12);
+  figure.layout();
+  PLOT_CHECK_NEAR(static_cast<plot::f64>(figure.plot(0u).layout().axes.right()),
+                  static_cast<plot::f64>(flush), 1e-4);
+}
+
 /// The degenerate neighbour: a figure of one row imposes exactly what that row
 /// measured, so it lays out as the plot would on its own -- the gutter cannot move a
 /// row that has no sibling to line up with.