figure: rows can hold several plots (cells), cell weights and column gap

include/plot/plot/figure.hpp

@@ -27,6 +27,11 @@ struct FigureLayout {
   /// strips and axes come from its own `Plot::layout()` against this rect, so a row
   /// with a y title keeps its column and no two rows can disagree about chrome.
   std::vector<Rect> rows;
+  /// One rect per plot, flattened row-major (row 0's cells left to right, then row 1's,
+  /// ...): the **viewport** each `Plot` was given. A row of one cell has exactly its row
+  /// rect here; a row of several tiles its rect left to right with `col_gap` between
+  /// cells, the cells' widths summing to the row's less the gaps.
+  std::vector<Rect> cells;
   /// The strip the figure's one shared x axis is drawn in: the bottom row's own
   /// `PlotLayout::x_label_area`, at the bottom of the bottom row's rect and so as
   /// wide as that row's axes rather than the whole figure. Read back from the row
@@ -44,6 +49,10 @@ struct FigureLayout {
   /// figure edge to edge, which is the default; it is dropped for a figure too
   /// short to hold it, so the rows never lose their height to a gap.
   f32 row_gap = 0.0f;
+  /// The horizontal gap between two cells of a row, in device pixels. `set_col_gap()`'s
+  /// value, or 0 when any row holding several cells was too narrow to hold it and
+  /// dropped it, so the cells never lose their width to a gap.
+  f32 col_gap = 0.0f;
 };
 
 /// Several plots stacked in one column, sharing one x axis.
@@ -94,13 +103,30 @@ class Figure {
   /// which is the *unlinked* group: rows that share nothing, each with the range
   /// its own plot was given.
   explicit Figure(u32 rows);
+  /// A figure of `cells_per_row.size()` rows, row `r` holding `cells_per_row[r]` plots side
+  /// by side (a count of 0 is clamped to 1). Every row of one cell makes this the same
+  /// figure as `Figure(rows)`. There is deliberately no `initializer_list` constructor, so
+  /// `Figure{3u}` keeps meaning three rows.
+  explicit Figure(std::span<const u32> cells_per_row);
 
-  u32 row_count() const noexcept { return static_cast<u32>(plots_.size()); }
+  /// The number of figure rows -- the bands stacked top to bottom -- which equals
-  /// One row's plot. A row that does not exist yields a default-constructed `Plot`
+  /// `plot_count()` for a figure no row of which is split.
-  /// rather than reading out of bounds -- the rule every accessor on `Plot` follows
+  u32 row_count() const noexcept { return static_cast<u32>(cells_per_row_.size()); }
-  /// -- so a stale row can only ever affect itself.
+  /// The number of plots, i.e. cells over all rows. `plot()`, `link_x()`, `x_link()` and
-  Plot& plot(u32 row) noexcept;
+  /// the hovered plot of `set_crosshair()` index this flattened (row-major) range.
-  const Plot& plot(u32 row) const noexcept;
+  u32 plot_count() const noexcept { return static_cast<u32>(plots_.size()); }
+  /// How many cells row `row` holds; 0 for a row that does not exist.
+  u32 cells_in_row(u32 row) const noexcept;
+  /// The flattened index of row `row`'s first cell; `plot_count()` for `row ==
+  /// row_count()` and for anything beyond.
+  u32 first_plot_of_row(u32 row) const noexcept;
+  /// The row that holds flattened plot `plot` (the last row for an index past the end).
+  u32 row_of_plot(u32 plot) const noexcept;
+  /// One plot, by flattened cell index. A plot that does not exist yields a
+  /// default-constructed `Plot` rather than reading out of bounds -- the rule every
+  /// accessor on `Plot` follows -- so a stale index can only ever affect itself.
+  Plot& plot(u32 index) noexcept;
+  const Plot& plot(u32 index) const noexcept;
 
   // --- geometry ---------------------------------------------------------
 
@@ -119,6 +145,21 @@ class Figure {
   void clear_row_weights() noexcept { row_weights_.clear(); }
   bool has_row_weights() const noexcept { return !row_weights_.empty(); }
 
+  /// How much of row `row`'s width each of its cells gets: `weights[i]` is cell i's
+  /// share of what is left after every cell has its floor width (64 logical pixels,
+  /// capped at an equal share of a narrow row). Normalised. Refused, changing nothing,
+  /// when the row does not exist, the count is not the row's cell count, or a weight is
+  /// not a positive finite number. A row with no weights divides equally.
+  Status set_cell_weights(u32 row, std::span<const f32> weights);
+  /// Back to an equal division of row `row`; a row that does not exist is ignored.
+  void clear_cell_weights(u32 row) noexcept;
+  bool has_cell_weights(u32 row) const noexcept;
+  /// The horizontal gap left between two cells of a row, in device pixels (0.0 by
+  /// default). Negative values are clamped to 0, and a gap too wide for a row to hold is
+  /// dropped for that layout rather than squeezing the cells to nothing.
+  void set_col_gap(f32 device_px) noexcept { col_gap_ = device_px > 0.0f ? device_px : 0.0f; }
+  f32 col_gap() const noexcept { return col_gap_; }
+
   /// The gap left between two rows, in device pixels (0.0 by default, so the rows
   /// tile the figure). Negative values are clamped to 0, and a gap too large for the
   /// figure to hold is dropped for that layout rather than squeezing the rows to
@@ -325,7 +366,18 @@ class Figure {
   /// a following group's window, push both to all members.
   void sync_x_links();
 
+  /// Fills the row bookkeeping (`cells_per_row_`, `row_first_`, `cell_weights_`) from a
+  /// per-row cell count, clamping each to at least one. Does not touch `plots_`, which the
+  /// constructors size from `total_cells()`.
+  void build_cells(std::span<const u32> cells);
+
   std::vector<Plot> plots_;
+  std::vector<u32> cells_per_row_;
+  /// Prefix sums of `cells_per_row_`: `rows + 1` entries, `row_first_[r]` the flattened
+  /// index of row r's first cell and the last entry the plot count.
+  std::vector<u32> row_first_;
+  std::vector<std::vector<f32>> cell_weights_;
+  f32 col_gap_ = 0.0f;
   /// What `plot()` yields for a row that does not exist, so a stale row can be used
   /// without reading out of bounds. Owned rather than a static, so one figure's
   /// stray row can never write into another's.

src/plot/figure.cpp

@@ -23,6 +23,56 @@ namespace {
 /// wants a taller floor gives the figure a taller viewport, or gives the rows weights.
 constexpr f32 kMinRowHeightLogical = 24.0f;
 
+/// The width a cell never drops below, in logical pixels, converted exactly as the row
+/// height floor is. It yields to the row -- capped at an equal share of the width there
+/// is -- so a row too narrow for its cells still tiles instead of overflowing.
+constexpr f32 kMinCellWidthLogical = 64.0f;
+
+/// The number of plots a per-row cell count asks for, each row holding at least one.
+u32 total_cells(std::span<const u32> cells) noexcept {
+  u32 total = 0;
+  for (const u32 c : cells) total += std::max<u32>(c, 1u);
+  return total;
+}
+
+/// Splits the row rect `r` into `n` cells in `out[0..n)` and returns the gap actually used.
+/// The cells tile `r` exactly: the gap is dropped when `r` cannot hold it, every cell first
+/// gets the floor width and then its weight's share of what is left, and the last cell
+/// closes the row on its right edge, absorbing the rounding of the ones before it.
+f32 place_cells(const Rect& r, u32 n, const std::vector<f32>& weights, f32 col_gap,
+                f32 ui_scale, Rect* out) {
+  if (n == 1u) {
+    out[0] = r;
+    return col_gap;
+  }
+  f32 gap = col_gap;
+  f32 usable = r.w - gap * static_cast<f32>(n - 1u);
+  if (usable <= 0.0f) {
+    gap = 0.0f;
+    usable = r.w;
+  }
+  usable = std::max(0.0f, usable);
+  const f32 floor_device = ui_scale > 0.0f ? kMinCellWidthLogical * ui_scale
+                                           : kMinCellWidthLogical;
+  const f32 floor_px = std::min(floor_device, usable / static_cast<f32>(n));
+  const f32 extra = usable - floor_px * static_cast<f32>(n);
+  f32 total = 0.0f;
+  const bool weighted = weights.size() == n;
+  if (weighted) {
+    for (const f32 w : weights) total += w;
+  }
+  f32 x = r.x;
+  f32 consumed = 0.0f;
+  for (u32 i = 0; i < n; ++i) {
+    const f32 share = weighted && total > 0.0f ? weights[i] / total : 1.0f / static_cast<f32>(n);
+    const f32 end = i + 1u == n ? usable : consumed + floor_px + extra * share;
+    out[i] = Rect{x, r.y, end - consumed, r.h};
+    consumed = end;
+    x = out[i].right() + gap;
+  }
+  return gap;
+}
+
 /// A coordinate in the shared axis' **axis space**: `log10` when the figure's one
 /// x axis -- the bottom row's, the row the shared strip belongs to -- is
 /// logarithmic, the value itself otherwise. A following group's span and offset
@@ -41,18 +91,72 @@ f64 from_link_space(f64 v, bool log) noexcept {
 
 }  // namespace
 
-Figure::Figure(u32 rows) : plots_(rows) {}
+Figure::Figure(u32 rows) : plots_(rows) {
-
+  const std::vector<u32> ones(rows, 1u);
-Plot& Figure::plot(u32 row) noexcept {
+  build_cells(std::span<const u32>(ones));
-  return row < plots_.size() ? plots_[row] : fallback_;
 }
 
-const Plot& Figure::plot(u32 row) const noexcept {
+Figure::Figure(std::span<const u32> cells_per_row) : plots_(total_cells(cells_per_row)) {
-  return row < plots_.size() ? plots_[row] : fallback_;
+  build_cells(cells_per_row);
+}
+
+void Figure::build_cells(std::span<const u32> cells) {
+  cells_per_row_.assign(cells.begin(), cells.end());
+  for (u32& c : cells_per_row_) c = std::max<u32>(c, 1u);
+  row_first_.assign(cells_per_row_.size() + 1u, 0u);
+  for (std::size_t r = 0; r < cells_per_row_.size(); ++r) {
+    row_first_[r + 1u] = row_first_[r] + cells_per_row_[r];
+  }
+  cell_weights_.assign(cells_per_row_.size(), {});
+}
+
+u32 Figure::cells_in_row(u32 row) const noexcept {
+  return row < cells_per_row_.size() ? cells_per_row_[row] : 0u;
+}
+
+u32 Figure::first_plot_of_row(u32 row) const noexcept {
+  return row < cells_per_row_.size() ? row_first_[row] : plot_count();
+}
+
+u32 Figure::row_of_plot(u32 plot) const noexcept {
+  u32 r = 0;
+  while (r + 1u < cells_per_row_.size() && row_first_[r + 1u] <= plot) ++r;
+  return r;
+}
+
+Plot& Figure::plot(u32 index) noexcept {
+  return index < plots_.size() ? plots_[index] : fallback_;
+}
+
+const Plot& Figure::plot(u32 index) const noexcept {
+  return index < plots_.size() ? plots_[index] : fallback_;
+}
+
+Status Figure::set_cell_weights(u32 row, std::span<const f32> weights) {
+  if (row >= cells_per_row_.size() || weights.size() != cells_per_row_[row]) {
+    return Status{ErrorCode::InvalidArgument, "cell weights must name every cell of an existing row"};
+  }
+  for (const f32 w : weights) {
+    if (!std::isfinite(w) || !(w > 0.0f)) {
+      return Status{ErrorCode::InvalidArgument,
+                    "cell weights must be positive finite numbers: a weight is a share of "
+                    "the row, and a cell with none of it has no rect"};
+    }
+  }
+  cell_weights_[row].assign(weights.begin(), weights.end());
+  return Status{};
+}
+
+void Figure::clear_cell_weights(u32 row) noexcept {
+  if (row < cell_weights_.size()) cell_weights_[row].clear();
+}
+
+bool Figure::has_cell_weights(u32 row) const noexcept {
+  return row < cell_weights_.size() && !cell_weights_[row].empty();
 }
 
 Status Figure::set_row_weights(std::span<const f32> weights) {
-  if (weights.size() != plots_.size()) {
+  if (weights.size() != cells_per_row_.size()) {
     return Status{ErrorCode::InvalidArgument, "row weights must name every row"};
   }
   f32 total = 0.0f;
@@ -369,6 +473,8 @@ void Figure::sync_x_links() {
 const FigureLayout& Figure::layout() {
   const u32 rows = row_count();
   layout_.rows.assign(rows, Rect{});
+  layout_.cells.clear();
+  layout_.col_gap = 0.0f;
   layout_.row_gap = row_gap_;
   layout_.x_axis_strip = Rect{};
   if (rows == 0u) {
@@ -441,20 +547,35 @@ const FigureLayout& Figure::layout() {
   // short to hold the one asked for.
   layout_.row_gap = gap;
 
+  // Each row rect is split into its cells; a one-cell row's cell is the rect itself, so an
+  // unsplit figure lays out exactly as it always did.
+  layout_.cells.assign(plots_.size(), Rect{});
+  layout_.col_gap = col_gap_;
+  for (u32 row = 0; row < rows; ++row) {
+    const u32 n = cells_per_row_[row];
+    const f32 used = place_cells(layout_.rows[row], n, cell_weights_[row], col_gap_,
+                                 floor_scale, &layout_.cells[row_first_[row]]);
+    if (n > 1u && used < col_gap_) layout_.col_gap = 0.0f;
+  }
+
   const u32 bottom_row = rows - 1u;
   for (u32 row = 0; row < rows; ++row) {
-    Plot& p = plots_[row];
+    // One x axis for the whole figure, and it is the bottom row's: every plot keeps its
-    p.set_viewport(layout_.rows[row]);
-    // One x axis for the whole figure, and it is the bottom row's: every row keeps its
     // x chrome -- labels, title and the strip the controller's axis zoom is found in --
-    // and every other row gives all of it to that one, so the labels and the title are
+    // and every plot above the bottom row gives all of it to that row, so the labels and
-    // not drawn once per row. A figure told to label every row keeps them everywhere,
+    // the title are not drawn once per row. A figure told to label every row keeps them
-    // and then there is no shared axis to speak of: each row has its own.
+    // everywhere, and then there is no shared axis to speak of: each plot has its own. A
-    p.set_x_strip_mode(labels_bottom_only_ && row != bottom_row ? XStrip::None : XStrip::Both);
+    // split bottom row labels each of its cells, each against its own x axis.
-    // Before either pass below, and the same value for every row: nothing is measured on
+    const XStrip strip = labels_bottom_only_ && row != bottom_row ? XStrip::None : XStrip::Both;
-    // the right, so unlike the left gutter this needs no measurement pass -- the rows end
+    for (u32 i = row_first_[row]; i < row_first_[row + 1u]; ++i) {
-    // on a common column because they are all told the one width.
+      Plot& p = plots_[i];
-    p.set_right_gutter(right_gutter_);
+      p.set_viewport(layout_.cells[i]);
+      p.set_x_strip_mode(strip);
+      // Before either pass below, and the same value for every plot: nothing is measured on
+      // the right, so unlike the left gutter this needs no measurement pass -- the plots
+      // end on a common column because they are all told the one width.
+      p.set_right_gutter(right_gutter_);
+    }
   }
   // After the viewports, so a row's ticks and grid -- built from its axes rect -- and
   // its transforms describe this frame's rects; and before the rows lay themselves
@@ -486,18 +607,21 @@ const FigureLayout& Figure::layout() {
   // `set_min_y_gutter()` seeds the maximum rather than being imposed on a row before the
   // measurement, so a reserved floor cannot widen what a row reports and then be widened
   // by its own reservation on the next frame.
+  //
+  // Over the flattened plots: every cell of every row takes part, so the y axes of a split
+  // row line up with each other and with the rows above and below.
   f32 gutter = min_y_gutter_;
-  for (u32 row = 0; row < rows; ++row) {
+  for (Plot& p : plots_) {
-    plots_[row].set_min_y_gutter(0.0f);
+    p.set_min_y_gutter(0.0f);
-    const PlotLayout& row_layout = plots_[row].layout();
+    const PlotLayout& row_layout = p.layout();
     gutter = std::max(gutter, row_layout.y_axis_width + row_layout.y_title_width);
   }
   // A one-row figure imposes exactly what that row measured, so it lays out as the plot
   // would on its own; a figure whose rows all need the same strip imposes that, which is
   // also what each would have done alone.
-  for (u32 row = 0; row < rows; ++row) {
+  for (Plot& p : plots_) {
-    plots_[row].set_min_y_gutter(gutter);
+    p.set_min_y_gutter(gutter);
-    plots_[row].layout();
+    p.layout();
   }
 
   // The figure's one x axis is the bottom row's, so the strip it is drawn in is that

src/render/renderer.cpp

@@ -471,7 +471,7 @@ void Renderer::draw(Figure& figure) {
   // Every row is prepared before the figure lays itself out, because a row's strips
   // are measured from the metrics this installs: a row measuring with one backend and
   // drawing with another is the defect the propagation point exists to prevent.
-  const u32 rows = figure.row_count();
+  const u32 rows = figure.plot_count();
   for (u32 row = 0; row < rows; ++row) prepare_plot(figure.plot(row));
 
   // The figure's one layout for the frame. It hands every row its rect and its

tests/test_figure.cpp

@@ -16,6 +16,7 @@
 #include <plot/render/embedded_mono_font.hpp>
 
 #include <cmath>
+#include <span>
 #include <vector>
 
 namespace {
@@ -1141,3 +1142,136 @@ PLOT_TEST(figure_crosshair_draws_a_horizontal_line_only_in_the_hovered_row) {
   PLOT_CHECK(figure.plot(1u).layout().crosshair.vertical.w > 0.0f);
   PLOT_CHECK(figure.plot(1u).layout().crosshair.horizontal.h == 0.0f);
 }
+
+// ------------------------------------------------------------------ cell grid
+
+namespace {
+
+/// A figure whose rows hold `cells[r]` plots each (the flattened plots in row-major
+/// order), with an x and a y axis on every plot unless `axes` is off.
+plot::Figure split_figure(const std::vector<plot::u32>& cells, bool axes = true) {
+  plot::Figure figure{std::span<const plot::u32>(cells)};  // braces: parentheses would be a vexing parse
+  figure.set_viewport(whole_figure());
+  if (axes) {
+    for (plot::u32 i = 0; i < figure.plot_count(); ++i) {
+      figure.plot(i).add_x_axis({"t", {0.0, 100.0}, false, plot::AxisPlace::Bottom, false});
+      figure.plot(i).add_y_axis({"v", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
+    }
+  }
+  return figure;
+}
+
+}  // namespace
+
+PLOT_TEST(figure_cells_all_ones_equals_rows) {
+  plot::Figure split = split_figure({1, 1, 1});
+  plot::Figure plain = figure_with_axes(3u);
+  const plot::FigureLayout& sl = split.layout();
+  const plot::FigureLayout& pl = plain.layout();
+  PLOT_CHECK(split.row_count() == 3u && split.plot_count() == 3u);
+  PLOT_CHECK(sl.cells.size() == 3u);
+  for (plot::u32 i = 0; i < 3u; ++i) {
+    PLOT_CHECK_NEAR(sl.cells[i].y, pl.rows[i].y, 0.01);
+    PLOT_CHECK_NEAR(sl.cells[i].h, pl.rows[i].h, 0.01);
+    PLOT_CHECK_NEAR(sl.cells[i].w, pl.rows[i].w, 0.01);
+  }
+}
+
+PLOT_TEST(figure_cells_tile_exactly) {
+  plot::Figure figure = split_figure({1, 2, 1});
+  figure.set_col_gap(10.0f);
+  const plot::FigureLayout& fl = figure.layout();
+  PLOT_CHECK(figure.row_count() == 3u && figure.plot_count() == 4u);
+  PLOT_CHECK(figure.cells_in_row(1u) == 2u);
+  PLOT_CHECK(figure.first_plot_of_row(1u) == 1u && figure.first_plot_of_row(3u) == 4u);
+  PLOT_CHECK(figure.row_of_plot(2u) == 1u);
+  PLOT_CHECK_NEAR(fl.cells[2].x - fl.cells[1].right(), 10.0, 0.01);
+  PLOT_CHECK_NEAR(fl.cells[2].right(), fl.rows[1].right(), 0.001);
+  PLOT_CHECK_NEAR(fl.cells[1].x, fl.rows[1].x, 0.001);
+  PLOT_CHECK_NEAR(fl.cells[1].y, fl.cells[2].y, 0.001);
+  PLOT_CHECK_NEAR(fl.cells[1].h, fl.cells[2].h, 0.001);
+  PLOT_CHECK_NEAR(fl.cells[1].w, fl.cells[2].w, 0.01);
+  PLOT_CHECK_NEAR(fl.col_gap, 10.0, 0.001);
+}
+
+PLOT_TEST(figure_cell_weights_and_floor) {
+  plot::Figure figure = split_figure({2});
+  figure.set_col_gap(0.0f);
+  const std::vector<plot::f32> w{3.0f, 1.0f};
+  PLOT_CHECK(figure.set_cell_weights(0u, w));
+  PLOT_CHECK(figure.has_cell_weights(0u));
+  {
+    const auto& c = figure.layout().cells;
+    PLOT_CHECK_NEAR((c[0].w - 64.0), (c[1].w - 64.0) * 3.0, 0.01);
+  }
+  const std::vector<plot::f32> tiny{1000.0f, 0.001f};
+  PLOT_CHECK(figure.set_cell_weights(0u, tiny));
+  PLOT_CHECK(figure.layout().cells[1].w >= 64.0f - 0.001f);
+  const std::vector<plot::f32> three{1.0f, 1.0f, 1.0f};
+  const std::vector<plot::f32> zero{1.0f, 0.0f};
+  PLOT_CHECK(!figure.set_cell_weights(0u, three));
+  PLOT_CHECK(!figure.set_cell_weights(0u, zero));
+  PLOT_CHECK(!figure.set_cell_weights(5u, w));
+  figure.clear_cell_weights(0u);
+  PLOT_CHECK(!figure.has_cell_weights(0u));
+  const auto& c = figure.layout().cells;
+  PLOT_CHECK_NEAR(c[0].w, c[1].w, 0.01);
+}
+
+PLOT_TEST(figure_cells_narrow_degrades) {
+  plot::Figure figure = split_figure({4}, false);
+  figure.set_viewport(plot::Rect{0.0f, 0.0f, 20.0f, 100.0f});
+  for (plot::u32 i = 0; i < 4u; ++i) {
+    figure.plot(i).add_x_axis({"t", {0.0, 100.0}, false, plot::AxisPlace::Bottom, false});
+    figure.plot(i).add_y_axis({"v", {-1.0, 1.0}, false, plot::AxisPlace::Left, false});
+  }
+  figure.set_col_gap(10.0f);
+  const plot::FigureLayout& fl = figure.layout();
+  double sum = 0.0;
+  for (const plot::Rect& c : fl.cells) {
+    PLOT_CHECK(c.w >= 0.0f && c.h >= 0.0f);
+    PLOT_CHECK_NEAR(c.h, 100.0, 0.01);
+    sum += c.w;
+  }
+  PLOT_CHECK_NEAR(sum, 20.0, 0.01);
+  PLOT_CHECK_NEAR(fl.col_gap, 0.0, 0.001);
+}
+
+PLOT_TEST(figure_cells_share_x_link_and_crosshair) {
+  plot::Figure figure = split_figure({2, 1});
+  const plot::u32 group = figure.add_x_link();
+  for (plot::u32 i = 0; i < 3u; ++i) PLOT_CHECK(figure.link_x(i, group));
+  figure.plot(1u).set_x_range(0u, {3.0, 9.0});
+  figure.layout();
+  for (plot::u32 i = 0; i < 3u; ++i) {
+    PLOT_CHECK_NEAR(figure.plot(i).x_range(0u).min, 3.0, 1e-9);
+    PLOT_CHECK_NEAR(figure.plot(i).x_range(0u).max, 9.0, 1e-9);
+  }
+  figure.set_crosshair(4.0, true);
+  for (plot::u32 i = 0; i < 3u; ++i) {
+    PLOT_CHECK(figure.plot(i).crosshair().active);
+    PLOT_CHECK_NEAR(figure.plot(i).crosshair().x, 4.0, 1e-9);
+  }
+  figure.clear_crosshair();
+  for (plot::u32 i = 0; i < 3u; ++i) PLOT_CHECK(!figure.plot(i).crosshair().active);
+}
+
+PLOT_TEST(figure_cells_x_labels_bottom_row_only) {
+  plot::Figure figure = split_figure({1, 2});
+  const plot::FigureLayout& fl = figure.layout();
+  PLOT_CHECK(figure.plot(0u).layout().x_label_area.h == 0.0f);
+  PLOT_CHECK(figure.plot(1u).layout().x_label_area.h > 0.0f);
+  PLOT_CHECK(figure.plot(2u).layout().x_label_area.h > 0.0f);
+  PLOT_CHECK_NEAR(fl.x_axis_strip.h, figure.plot(2u).layout().x_label_area.h, 0.001);
+}
+
+PLOT_TEST(figure_cells_common_y_gutter) {
+  plot::Figure figure = split_figure({2}, false);
+  give_magnitude_row(figure.plot(0u), 0u);
+  give_magnitude_row(figure.plot(1u), 1u);
+  const plot::FigureLayout& fl = figure.layout();
+  const double g0 = figure.plot(0u).layout().axes.x - fl.cells[0].x;
+  const double g1 = figure.plot(1u).layout().axes.x - fl.cells[1].x;
+  PLOT_CHECK(g0 > 0.0);
+  PLOT_CHECK_NEAR(g0, g1, 0.01);
+}