feat: a plot can carry a phosphor density, one image for every acquisition

`Plot::set_density()` gives a plot a **phosphor density**: a screen-sized intensity image behind
its traces, into which each acquisition is deposited and which fades by a time constant or by a
per-acquisition factor. It is the library's and not a host's because the library is the side that
knows a trace's device geometry -- a host would be re-rasterising traces the renderer has already
staged, at a second derivation of the same mapping.

It is an **image and not a set of retained traces**, and that is the whole of its cost: one `f32`
cell per device pixel of the axes rect (`DensityGrid`), a cell's value a *number of sweeps*, so a
display of a thousand acquisitions costs what one costs and there is no depth to get wrong.
Measured on a 640x360 viewport's axes: **573x313 = 179 349 cells, 717 396 bytes** of grid, and one
byte per cell uploaded on the frame the grid moved.

- `Plot::accumulate_density()` deposits the acquisition on screen: every visible trace's window is
  mapped to sample indices and gathered exactly as `Renderer::draw_traces()` maps it, then walked
  column by column -- so the deposit is bounded by the axes' columns and not by the samples behind
  them -- and a cell takes **1.0 once per trace per sweep**, however many of that trace's own
  samples crossed it. Counting the hits instead put a single dense sweep at the ceiling of the
  brightness scale and hid the sweeps behind it, and it made a cell mean "how much the beam moved
  here" rather than "how many acquisitions were here"; the dedupe is a stamp per grid *row* (one
  `u64`, keyed by trace and column) so two sweeps agreeing on a cell still count twice. Dwell is a
  different question the library already answers (`Style::intensity_grading`).
- `decay_density(dt_s)` fades by the clock, `clear_density()` and switching the density off drop
  the image at once. `DensityConfig` carries `full_scale` and `gamma`, applied on the CPU when the
  grid changed: the value a host reads back through `ink()`/`peak()` and the picture it sees are
  one derivation, and a frame whose grid did not move skips the conversion and the upload entirely
  (`FrameStats::density_cells`/`density_upload_bytes`, the latter the *frame's* total over every
  row, which one row's assignment used to overwrite).
- The renderer draws it as one attribute-less quad over the axes rect (`kDensityVS`/`kDensityFS`,
  `DensityProgram`), over the grid and the invalid-span bands and **under the traces**, inside the
  axes' clip: it reserves no layout space and nothing on it can be picked, exactly as
  `Plot::set_invalid_spans()` does. `Style::density` is its tint.
- The two fades are the two questions a persistence display can be asked -- "still visible a second
  later" and "the N-th back is gone" -- so the choice is the caller's.

Six cases, all in the suite: four plot-level ones (the grid's resolution and memory, the
per-acquisition schedule **584 -> 876 -> 1022** ink with `peak_steady=2.000`, `exp(-dt/tau)` off
the ink, and the deposit's own geometry including a NaN as a gap) and one on the real driver
(`a_phosphor_density_is_drawn_under_the_traces`: `cells=179349 uploaded=179349` on the moved frame
and `uploaded=0` on the identical one after it, with the trace's stroke keeping its own colour over
the ink). The suite is **396 cases, 0 failed** and all four ctest entries pass.

include/plot/render/style.hpp

@@ -77,6 +77,14 @@ struct Style {
   /// different kinds of thing; and still above the threshold where the difference from *no* band
   /// is visible, which is the floor this alpha is chosen against.
   Color invalid_repaired_fill = Color::hex(0x8A94A6, 0.08f);
+  /// The tint a plot's **phosphor density** is drawn in (`Plot::set_density()`): the grid's
+  /// luminance comes from the accumulated counts, and this is the monochrome hue it is multiplied
+  /// into -- the density says *how often*, so it must not also say *which signal*, and a trace
+  /// colour here would make a ghost read as a trace that is not there. A near-white neutral, one
+  /// step brighter than `invalid_fill`'s grey, because this is ink the plot *has* and a hole is
+  /// ink it is missing. The alpha is the whole brightness scale's ceiling -- the shader multiplies
+  /// it by each cell's own value -- so under 1 it puts a lid on how bright the display can get.
+  Color density = Color::hex(0xDFF2FF, 0.85f);
   /// The crosshair's colour: its two lines and the readout panel's border (spec §15). Markers are
   /// deliberately *not* this colour -- they carry each trace's own, because a marker says *which*
   /// trace and the line says *where*.